國立虎尾科技大學 |

Additive Manufacturing of Hydrocarbon-Based Elastomers and Composites.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Additive Manufacturing of Hydrocarbon-Based Elastomers and Composites./
作者:	Wen, Jianheng.
面頁冊數:	1 online resource (209 pages)
附註:	Source: Dissertations Abstracts International, Volume: 85-11, Section: B.
Contained By:	Dissertations Abstracts International85-11B.
標題:	Polymer chemistry. -
電子資源:	click for full text (PQDT)
ISBN:	9798382769219

Additive Manufacturing of Hydrocarbon-Based Elastomers and Composites.
Wen, Jianheng.

Additive Manufacturing of Hydrocarbon-Based Elastomers and Composites. - 1 online resource (209 pages)

Source: Dissertations Abstracts International, Volume: 85-11, Section: B.

Thesis (Ph.D.)--Arizona State University, 2024.

Includes bibliographical references

Additive manufacturing (AM) gathers increasing attention for its customization and sustainability benefits, including material efficiency, lightweighting, and energy conservation. This dissertation explores innovative strategies for 3D printing elastomers using vat photopolymerization (VP) and direct ink writing (DIW). The first study introduces a strategy for incorporating high molecular weight isoprene rubber latexes into VP to address the challenges of processing elastomers. The addition of water-soluble monomers and crosslinkers to the latex aqueous phase yielded a photocurable, lowviscosity precursor suitable for VP. Photopolymerization in the aqueous phase created a hydrogel scaffold surrounding the polymeric particles, solidifying the latex into a green body. Post-processing removed water, driving the coalescence of isoprene rubber particles and resulting in a semi-interpenetrating polymepost-processing) with exceptional elongation at break up to 600%. Expanding on this, VP of sulfonated ethylene-propylenediene monomer (sEPDM) latex demonstrated the 3D printing of olefinic elastomers. The sEPDM formed a physically crosslinked network due to ionic aggregation, leading to an interpenetrating polymer network (IPN) with tunable mechanical properties after sEPDM particles coalesced throughout the scaffold network during the post processing of printed green body. The introduction of polymerizable counterions for sulfonate groups at the sEPDM particle interfaces created a novel photocuring mechanism for latexes. The copolymerization of monomer added in the aqueous phase and 2-(Dimethylamino)ethyl methacrylate (DMAEMA) at the sEPDM particles generated a physically crosslinked hydrogel network through the ionic association on the latex particle interfaces. The absence of covalent crosslinked network highlighted the potential of 3D printing reprocessable materials. The last two projects utilized hybrid colloids composed of inorganic nanoparticles and styrene-butadiene rubber (SBR) particles for the 3D printing of polymer composites. The mixture of silica nanoparticle colloid and SBR latex demonstrated shear yield-stress behavior, enabling DIW. The modification of silica nanoparticle surface functionalities tuned the interaction between the silica and the polymer matrix, influencing the material mechanical properties. Electrically conductive fillers, single-wall carbon nanotubes (SWCNTs), were applied in SBR hybrid colloids to demonstrate VP of SWCNT-SBR composites. The results revealed enhanced electrical conductivity of the composites with increased SWCNT content, demonstrating the potential application of 3D printing elastomeric conductive materials.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798382769219Subjects--Topical Terms:

1182163
Polymer chemistry.
Subjects--Index Terms:

3D printingIndex Terms--Genre/Form:

554714
Electronic books.

Additive Manufacturing of Hydrocarbon-Based Elastomers and Composites.
LDR:04106ntm a22004097 4500 001 1152050
005 20241125080222.5
006 m o d
007 cr mn ---uuuuu
008 250605s2024 xx obm 000 0 eng d
020 $a 9798382769219
035 $a (MiAaPQ)AAI31299296
035 $a AAI31299296
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Wen, Jianheng. $3 1478930
245 1 0 $a Additive Manufacturing of Hydrocarbon-Based Elastomers and Composites.
264 0 $c 2024
300 $a 1 online resource (209 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 85-11, Section: B.
500 $a Advisor: Long, Timothy E.
502 $a Thesis (Ph.D.)--Arizona State University, 2024.
504 $a Includes bibliographical references
520 $a Additive manufacturing (AM) gathers increasing attention for its customization and sustainability benefits, including material efficiency, lightweighting, and energy conservation. This dissertation explores innovative strategies for 3D printing elastomers using vat photopolymerization (VP) and direct ink writing (DIW). The first study introduces a strategy for incorporating high molecular weight isoprene rubber latexes into VP to address the challenges of processing elastomers. The addition of water-soluble monomers and crosslinkers to the latex aqueous phase yielded a photocurable, lowviscosity precursor suitable for VP. Photopolymerization in the aqueous phase created a hydrogel scaffold surrounding the polymeric particles, solidifying the latex into a green body. Post-processing removed water, driving the coalescence of isoprene rubber particles and resulting in a semi-interpenetrating polymepost-processing) with exceptional elongation at break up to 600%. Expanding on this, VP of sulfonated ethylene-propylenediene monomer (sEPDM) latex demonstrated the 3D printing of olefinic elastomers. The sEPDM formed a physically crosslinked network due to ionic aggregation, leading to an interpenetrating polymer network (IPN) with tunable mechanical properties after sEPDM particles coalesced throughout the scaffold network during the post processing of printed green body. The introduction of polymerizable counterions for sulfonate groups at the sEPDM particle interfaces created a novel photocuring mechanism for latexes. The copolymerization of monomer added in the aqueous phase and 2-(Dimethylamino)ethyl methacrylate (DMAEMA) at the sEPDM particles generated a physically crosslinked hydrogel network through the ionic association on the latex particle interfaces. The absence of covalent crosslinked network highlighted the potential of 3D printing reprocessable materials. The last two projects utilized hybrid colloids composed of inorganic nanoparticles and styrene-butadiene rubber (SBR) particles for the 3D printing of polymer composites. The mixture of silica nanoparticle colloid and SBR latex demonstrated shear yield-stress behavior, enabling DIW. The modification of silica nanoparticle surface functionalities tuned the interaction between the silica and the polymer matrix, influencing the material mechanical properties. Electrically conductive fillers, single-wall carbon nanotubes (SWCNTs), were applied in SBR hybrid colloids to demonstrate VP of SWCNT-SBR composites. The results revealed enhanced electrical conductivity of the composites with increased SWCNT content, demonstrating the potential application of 3D printing elastomeric conductive materials.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Polymer chemistry. $3 1182163
650 4 $a Materials science. $3 557839
650 4 $a Chemistry. $3 593913
653 $a 3D printing
653 $a Polymer composites
653 $a Elastomer
653 $a Interpenetrating polymer network
653 $a Latexes
653 $a Vat photopolymerization
655 7 $a Electronic books. $2 local $3 554714
690 $a 0485
690 $a 0794
690 $a 0495
710 2 $a Arizona State University. $b Chemistry. $3 1186935
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Dissertations Abstracts International $g 85-11B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=31299296 $z click for full text (PQDT)