國立虎尾科技大學 |

Advances in design, simulation and manufacturing VIII = proceedings of the 8th International Conference on Design, Simulation, Manufacturing : the innovation exchange, DSMIE-2025, June 17-20, 2025, Porto, Portugal.. Volume 1,. mechanical engineering /

Record Type:	Language materials, printed : Monograph/item
Title/Author:	Advances in design, simulation and manufacturing VIII/ edited by Raul D. Campilho ... [et al.].
Reminder of title:	proceedings of the 8th International Conference on Design, Simulation, Manufacturing : the innovation exchange, DSMIE-2025, June 17-20, 2025, Porto, Portugal.
remainder title:	DSMIE-2025
other author:	Campilho, Raul D.
corporate name:	Workshop on the Preservation of Stability under Discretization
Published:	Cham :Springer Nature Switzerland : : 2025.,
Description:	xv, 282 p. :ill. (some col.), digital ; : 24 cm.;
Contained By:	Springer Nature eBook
Subject:	Manufacturing processes - Case studies. -
Online resource:	https://doi.org/10.1007/978-3-031-95218-0
ISBN:	9783031952180

Advances in design, simulation and manufacturing VIII = proceedings of the 8th International Conference on Design, Simulation, Manufacturing : the innovation exchange, DSMIE-2025, June 17-20, 2025, Porto, Portugal.. Volume 1,. mechanical engineering /
Advances in design, simulation and manufacturing VIIIproceedings of the 8th International Conference on Design, Simulation, Manufacturing : the innovation exchange, DSMIE-2025, June 17-20, 2025, Porto, Portugal.Volume 1,mechanical engineering /[electronic resource] :DSMIE-2025edited by Raul D. Campilho ... [et al.]. - Cham :Springer Nature Switzerland :2025. - xv, 282 p. :ill. (some col.), digital ;24 cm. - Lecture notes in mechanical engineering,2195-4364. - Lecture notes in mechanical engineering..

Implementation of Auxiliary Inner Tube Feeding System for Reduce Cycle Time and Stabilize the Workflow -- Investigation of the Process of Making Applesauce and Development the Device for its Implementation -- Recapitulating the Mechanical Anisotropy of the Spinal Cord via 3D Printing and Sinusoidal Scaffold Design -- Application of Catenary Curve Principles in the Design of the Low-Floor Bus Body Cross-Section -- Technological Solutions for Increasing the Resource of Shredders.

This book reports on advances in mechanical engineering, with a special emphasis on innovative design approaches, constructions and working processes, and on intelligent devices. It discusses physical aspects during pressing and vibrational processing, and findings relating to static stiffness and wear resistance. Further chapters report on the modeling and simulation of mechanical systems using mathematical modeling, numerical simulation, and experimental studies. This book also describes the use of LabVIEW, an infrared camera, and acoustic technology for the control and diagnostic of air leaks and radial runout of gear wheels. It discusses topics concerning the efficiency of systems and processes, reporting on new strategies for improving the design and operation of hydraulic machine rotors, screw and roller presses, and homogenizers, among others. Based on the 8th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2025), held on June 17-20, 2025, in Porto, Portugal, this second volume of a 4-volume set provides academics and professionals with extensive information on technologies, trends, challenges, and practice-oriented experience in all the above-mentioned.

ISBN: 9783031952180

Standard No.: 10.1007/978-3-031-95218-0doiSubjects--Topical Terms:

670013
Manufacturing processes
--Case studies.

LC Class. No.: TS183

Dewey Class. No.: 670

Advances in design, simulation and manufacturing VIII = proceedings of the 8th International Conference on Design, Simulation, Manufacturing : the innovation exchange, DSMIE-2025, June 17-20, 2025, Porto, Portugal.. Volume 1,. mechanical engineering /
LDR:02998nam a22003495a 4500 001 1172435
003 DE-He213
005 20251229072229.0
006 m d
007 cr nn 008maaau
008 260625s2025 sz s 0 eng d
020 $a 9783031952180 $q (electronic bk.)
020 $a 9783031952173 $q (paper)
024 7 $a 10.1007/978-3-031-95218-0 $2 doi
035 $a 978-3-031-95218-0
040 $a GP $c GP
041 0 $a eng
050 4 $a TS183
072 7 $a TBD $2 bicssc
072 7 $a TEC016000 $2 bisacsh
072 7 $a TBD $2 thema
082 0 4 $a 670 $2 23
090 $a TS183 $b .I61 2025
111 2 $a Workshop on the Preservation of Stability under Discretization $d (2001 : $c Fort Collins, Colo.) $3 527686
245 1 0 $a Advances in design, simulation and manufacturing VIII $h [electronic resource] : $b proceedings of the 8th International Conference on Design, Simulation, Manufacturing : the innovation exchange, DSMIE-2025, June 17-20, 2025, Porto, Portugal. $n Volume 1, $p mechanical engineering / $c edited by Raul D. Campilho ... [et al.].
246 3 $a DSMIE-2025
260 $a Cham : $c 2025. $b Springer Nature Switzerland : $b Imprint: Springer,
300 $a xv, 282 p. : $b ill. (some col.), digital ; $c 24 cm.
490 1 $a Lecture notes in mechanical engineering, $x 2195-4364
505 0 $a Implementation of Auxiliary Inner Tube Feeding System for Reduce Cycle Time and Stabilize the Workflow -- Investigation of the Process of Making Applesauce and Development the Device for its Implementation -- Recapitulating the Mechanical Anisotropy of the Spinal Cord via 3D Printing and Sinusoidal Scaffold Design -- Application of Catenary Curve Principles in the Design of the Low-Floor Bus Body Cross-Section -- Technological Solutions for Increasing the Resource of Shredders.
520 $a This book reports on advances in mechanical engineering, with a special emphasis on innovative design approaches, constructions and working processes, and on intelligent devices. It discusses physical aspects during pressing and vibrational processing, and findings relating to static stiffness and wear resistance. Further chapters report on the modeling and simulation of mechanical systems using mathematical modeling, numerical simulation, and experimental studies. This book also describes the use of LabVIEW, an infrared camera, and acoustic technology for the control and diagnostic of air leaks and radial runout of gear wheels. It discusses topics concerning the efficiency of systems and processes, reporting on new strategies for improving the design and operation of hydraulic machine rotors, screw and roller presses, and homogenizers, among others. Based on the 8th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2025), held on June 17-20, 2025, in Porto, Portugal, this second volume of a 4-volume set provides academics and professionals with extensive information on technologies, trends, challenges, and practice-oriented experience in all the above-mentioned.
650 0 $a Manufacturing processes $v Case studies. $3 670013 $3 739607
650 0 $a Manufacturing processes $x Computer simulation $v Congresses. $3 1069236
650 0 $a Engineering design $v Congresses. $3 671091 $3 731117
650 1 4 $a Engineering Design. $3 670857
650 2 4 $a Applied Dynamical Systems. $3 1366186
650 2 4 $a Control, Robotics, Automation. $3 1365878
700 1 $a Campilho, Raul D. $3 1503155
710 2 $a SpringerLink (Online service) $3 593884
773 0 $t Springer Nature eBook
830 0 $a Lecture notes in mechanical engineering. $3 882570
856 4 0 $u https://doi.org/10.1007/978-3-031-95218-0
950 $a Mechanical Engineering (R0) (SpringerNature-85268)