國立虎尾科技大學 |

Design and Development of Automation System for (Clothes Folding Machine)

Record Type:	Language materials, printed : Monograph/item
Title/Author:	Design and Development of Automation System for (Clothes Folding Machine)/ Bakr Saeed Riziq Daraghmeh.
Author:	Daraghmeh, Bakr Saeed Riziq,
Description:	1 electronic resource (75 pages)
Notes:	Source: Masters Abstracts International, Volume: 85-04.
Contained By:	Masters Abstracts International85-04.
Subject:	Software. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30600490
ISBN:	9798380462808

Design and Development of Automation System for (Clothes Folding Machine)
Daraghmeh, Bakr Saeed Riziq,

Design and Development of Automation System for (Clothes Folding Machine) [electronic resource] /Bakr Saeed Riziq Daraghmeh. - 1 electronic resource (75 pages)

Source: Masters Abstracts International, Volume: 85-04.

Clothes folding machine is developed and designed to overcome the routine task of folding clothes, because of its highly requirement in our daily life use. The machine represented a fully automation system that combines the mechanical design with the electrical control design. the machine was developed to serve the normal people with a normal human intelligence so its design was completely representing the manual way of clothes folding, and specifically following the steps of folding the sleeves back ward then folding the lower shirt part and finally try to flip the shirt to its upper face on the way of delivering it to the operator. Shirts was taken as the first sample which the machine mechanisms designed to fold. Human intelligence was also required to overcome the obstacle of defining the clothes type and shape. So it was required by the operator to feed the clothes with a certain way, then allow the machine to fold it. Using the 3D simulation with the help of CAD engineering softwares (solidworks) boost the initial ideas to a desired point to go through the control part. PLC take a place to control the mechanisms with proper time folding and sequence. OMRON PLC CP1L model training kit hardware connected to the CXProgrammer software was the way of implementing the actual outputs for the machine parts movement before putting it in a prototype manner.

English

ISBN: 9798380462808Subjects--Topical Terms:

574116
Software.

Design and Development of Automation System for (Clothes Folding Machine)
LDR:02654nam a22003613i 4500 001 1172870
005 20260622113218.5
006 m o d
007 cr|nu||||||||
008 260803s2019 miu||||||m |||||||eng d
020 $a 9798380462808
035 $a (MiAaPQD)AAI30600490
035 $a (MiAaPQD)Malayastudentsrepoumedumy11317
035 $a AAI30600490
040 $a MiAaPQD $b eng $c MiAaPQD $e rda
100 1 $a Daraghmeh, Bakr Saeed Riziq, $e author. $3 1503492
245 1 0 $a Design and Development of Automation System for (Clothes Folding Machine) $c Bakr Saeed Riziq Daraghmeh. $h [electronic resource] /
264 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2019
300 $a 1 electronic resource (75 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 85-04.
500 $a Advisors: Dahari, Mahidzal.
502 $b M.Eng. $c University of Malaya (Malaysia) $d 2019.
520 # $a Clothes folding machine is developed and designed to overcome the routine task of folding clothes, because of its highly requirement in our daily life use. The machine represented a fully automation system that combines the mechanical design with the electrical control design. the machine was developed to serve the normal people with a normal human intelligence so its design was completely representing the manual way of clothes folding, and specifically following the steps of folding the sleeves back ward then folding the lower shirt part and finally try to flip the shirt to its upper face on the way of delivering it to the operator. Shirts was taken as the first sample which the machine mechanisms designed to fold. Human intelligence was also required to overcome the obstacle of defining the clothes type and shape. So it was required by the operator to feed the clothes with a certain way, then allow the machine to fold it. Using the 3D simulation with the help of CAD engineering softwares (solidworks) boost the initial ideas to a desired point to go through the control part. PLC take a place to control the mechanisms with proper time folding and sequence. OMRON PLC CP1L model training kit hardware connected to the CXProgrammer software was the way of implementing the actual outputs for the machine parts movement before putting it in a prototype manner.
546 $a English
590 $a School code: 1293
650 # 4 $a Software. $2 gtt $3 574116
650 # 4 $a Design. $3 595500
650 # 4 $a Clothing. $3 1466655
690 $a 0389
710 2 # $a University of Malaya (Malaysia). $3 1466001
720 1 $a Dahari, Mahidzal $e degree supervisor.
773 0 # $t Masters Abstracts International $g 85-04.
790 $a 1293
791 $a M.Eng.
792 $a 2019
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30600490