國立虎尾科技大學 |

登入

回首頁

行動電話微型揚聲器核心技術設計與分析 = Design and anal...

Fuh-Shyang Juang

行動電話微型揚聲器核心技術設計與分析 = Design and analysis of the core technology for the micro speaker in cellular phone

紀錄類型:	書目-語言資料,印刷品 : 單行本
並列題名:	Design and analysis of the core technology for the micro speaker in cellular phone
作者:	何敘姿,
其他作者:	莊賦祥,
其他團體作者:	國立虎尾科技大學
出版地:	雲林縣
出版者:	國立虎尾科技大學;
出版年:	民96[2007]
版本:	初版
面頁冊數:	82面圖,表 : 30公分;
標題:	F0
標題:	F0
電子資源:	http://140.130.12.251/ETD-db/ETD-search-c/view_etd?URN=etd-0802107-181253
摘要註:	行動電話用揚聲器因為受尺寸上的限制導致低感度、高失真以及高共振頻率之缺點，運用分析軟體加以模擬分析，並藉此獲得最佳的幾何尺寸參數來提升行動電話揚聲器的性能表現。揚聲器的動作原理為對於和磁場之磁力線成90°之導體通以電流，依據佛來明(Fleming)左手定則，導體會依定則之運動方向作運動，(此即馬達的動作原理 )，由於導體(即音圈)被粘著於振動膜上，故振動膜即會被間接帶動振動空氣而產生聲音。在理論分析方面，以橢圓形振動板的振動理論來分析振動板的共振頻率及模態，在有限元素軟體進行模擬分析，瞭解振動板花紋形式、數目及振動力臂對振動板強度的影響。本論文實際將揚聲器製成成品並與模擬結果做比對分析。這些分析結果對日後研發新的揚聲器可作為參考，並有助於改善現有揚聲器的電氣性能。 This study aimed to improve the drawbacks of low sensitivity, high distortion, and high resonance frequency of cellular phone speakerphone due to the limit of its size. Using an analyzing software to simulate and to analyze for obtaining the optimal dimensional parameter in geometry, in order to improve the performance of cellular phone speakerphone. The operating principle of speakerphone is that it electrifies the conductor that aligns with the magnetic line of force at 90° angle. According to Fleming's Left Hand Rules, the conductor would move along the direction in the rule (which is also the motion principle of motor). Due to the conductor (sound coil) is adhered to the vibration diaphragm, so that the vibration diaphragm is driven to vibrate the air to make sounds. For theoretical analysis, the vibration theory of oval shape vibration board was used to analyze the resonance frequency and model. The limit element software was used for simulation analysis to understand how the rigidity of vibration board is affected by its pattern, quantity and, material textures. On the thesis, it would fabricate a speakerphone into a finished product, and then compare the performance with simulation results. The results could be used as reference to the development of new speakerphones in the future, and improve the electronic performances of speakerphone presently.

行動電話微型揚聲器核心技術設計與分析 = Design and analysis of the core technology for the micro speaker in cellular phone
何, 敘姿

行動電話微型揚聲器核心技術設計與分析 = Design and analysis of the core technology for the micro speaker in cellular phone / 何敘姿 - 初版. - 雲林縣 : 國立虎尾科技大學, 民96[2007]. - 82面 ; 圖,表 ; 30公分.
F0F0

莊, 賦祥

行動電話微型揚聲器核心技術設計與分析 = Design and analysis of the core technology for the micro speaker in cellular phone
LDR:03380nam0 2200253 450 001 540352
010 0 $b 平裝
100 $a 20090416h akaa0chia50020302ba
101 0 $a chi
102 $a cw
105 $a ak am 000yy
200 1 $a 行動電話微型揚聲器核心技術設計與分析 $d Design and analysis of the core technology for the micro speaker in cellular phone $f 何敘姿
205 $a 初版
210 $a 雲林縣 $d 民96[2007] $c 國立虎尾科技大學
215 0 $a 82面 $c 圖,表 $d 30公分
314 $a 指導教授：莊賦祥
328 $a 碩士論文--國立虎尾科技大學光電與材料科技研究所
330 $a 行動電話用揚聲器因為受尺寸上的限制導致低感度、高失真以及高共振頻率之缺點，運用分析軟體加以模擬分析，並藉此獲得最佳的幾何尺寸參數來提升行動電話揚聲器的性能表現。揚聲器的動作原理為對於和磁場之磁力線成90°之導體通以電流，依據佛來明(Fleming)左手定則，導體會依定則之運動方向作運動，(此即馬達的動作原理 )，由於導體(即音圈)被粘著於振動膜上，故振動膜即會被間接帶動振動空氣而產生聲音。在理論分析方面，以橢圓形振動板的振動理論來分析振動板的共振頻率及模態，在有限元素軟體進行模擬分析，瞭解振動板花紋形式、數目及振動力臂對振動板強度的影響。本論文實際將揚聲器製成成品並與模擬結果做比對分析。這些分析結果對日後研發新的揚聲器可作為參考，並有助於改善現有揚聲器的電氣性能。 This study aimed to improve the drawbacks of low sensitivity, high distortion, and high resonance frequency of cellular phone speakerphone due to the limit of its size. Using an analyzing software to simulate and to analyze for obtaining the optimal dimensional parameter in geometry, in order to improve the performance of cellular phone speakerphone. The operating principle of speakerphone is that it electrifies the conductor that aligns with the magnetic line of force at 90° angle. According to Fleming's Left Hand Rules, the conductor would move along the direction in the rule (which is also the motion principle of motor). Due to the conductor (sound coil) is adhered to the vibration diaphragm, so that the vibration diaphragm is driven to vibrate the air to make sounds. For theoretical analysis, the vibration theory of oval shape vibration board was used to analyze the resonance frequency and model. The limit element software was used for simulation analysis to understand how the rigidity of vibration board is affected by its pattern, quantity and, material textures. On the thesis, it would fabricate a speakerphone into a finished product, and then compare the performance with simulation results. The results could be used as reference to the development of new speakerphones in the future, and improve the electronic performances of speakerphone presently.
510 1 $a Design and analysis of the core technology for the micro speaker in cellular phone
610 1 $a F0 $a micro speaker $a speaker
610 0 $a F0 $a 微型揚聲器 $a 振動板 $a 橢圓形振動板
681 $a 008.166M $b 2183
700 $a 何 $b 敘姿 $3 523811
702 $a 莊 $b 賦祥 $3 487566
712 $a 國立虎尾科技大學 $b 工業工程與管理究所 $3 523742
770 $a Hsu-Tzu Ho $3 586605
772 $a Fuh-Shyang Juang $3 538197
801 0 $a cw $b 虎尾科技大學 $c 20071207 $g CCR
801 2 $a cw $b 虎尾科技大學 $c 20090416 $g CCR
856 7 $u http://140.130.12.251/ETD-db/ETD-search-c/view_etd?URN=etd-0802107-181253