語系:
繁體中文
English
說明(常見問題)
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Silicon Infrared Photodetector Using...
~
University of California, San Diego.
Silicon Infrared Photodetector Using Sub-bandgap Transitions.
紀錄類型:
書目-語言資料,印刷品 : Monograph/item
正題名/作者:
Silicon Infrared Photodetector Using Sub-bandgap Transitions./
作者:
Kim, HongKwon.
面頁冊數:
125 p.
附註:
Source: Dissertation Abstracts International, Volume: 73-02, Section: B, page: 1139.
Contained By:
Dissertation Abstracts International73-02B.
標題:
Engineering, Electronics and Electrical. -
電子資源:
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3478957
ISBN:
9781124970042
Silicon Infrared Photodetector Using Sub-bandgap Transitions.
Kim, HongKwon.
Silicon Infrared Photodetector Using Sub-bandgap Transitions.
- 125 p.
Source: Dissertation Abstracts International, Volume: 73-02, Section: B, page: 1139.
Thesis (Ph.D.)--University of California, San Diego, 2011.
This dissertation details the use of silicon as near-infrared photodetectors based on two different optical sub-bandgap transition mechanisms: band to surface state transition and band to sub-bandgap transition. For maximizing these effects and realizing ultra-high resolution imager arrays, a vertical nanowire structure is used. Nanoimprinting Lithography (NIL) is used to practically obtain nano-scaled patterns on a large area.
ISBN: 9781124970042Subjects--Topical Terms:
845382
Engineering, Electronics and Electrical.
Silicon Infrared Photodetector Using Sub-bandgap Transitions.
LDR
:03360nam 2200337 4500
001
712958
005
20121003100316.5
008
121101s2011 ||||||||||||||||| ||eng d
020
$a
9781124970042
035
$a
(UMI)AAI3478957
035
$a
AAI3478957
040
$a
UMI
$c
UMI
100
1
$a
Kim, HongKwon.
$3
845486
245
1 0
$a
Silicon Infrared Photodetector Using Sub-bandgap Transitions.
300
$a
125 p.
500
$a
Source: Dissertation Abstracts International, Volume: 73-02, Section: B, page: 1139.
500
$a
Adviser: Yu-Hwa Lo.
502
$a
Thesis (Ph.D.)--University of California, San Diego, 2011.
520
$a
This dissertation details the use of silicon as near-infrared photodetectors based on two different optical sub-bandgap transition mechanisms: band to surface state transition and band to sub-bandgap transition. For maximizing these effects and realizing ultra-high resolution imager arrays, a vertical nanowire structure is used. Nanoimprinting Lithography (NIL) is used to practically obtain nano-scaled patterns on a large area.
520
$a
In the case of band to surface state transitions, vertical silicon nanowire arrays have been fabricated through the use of UV NIL and conventional etching technology. They have an ability to detect pico watts level of light per nanowire at 1550nm IR light and a femto watt level at 635nm visible light. Their broad band detection spectrum and high sensitivity arise from the high surface to volume ratio. The high surface to volume ratio induces a built-in field in the radial direction, which confines the carriers in the core of the wire and substantially increases the lifetime of the confined carriers. These effects allow us to obtain a responsivity of 100A/W per nanowire to 1550nm light at 170K.
520
$a
Measurement results of our silicon nanowire arrays also show the limitation for the application of commercial products due to the high dark current at room temperature and the surface state uncertainty. Thus, we propose a core shell structure which frees the device characteristics from surface state effects while enormously enhancing the gain and reducing the dark current. IR detection in core shell nanowires can also occur by sub-bandgap transitions. To validate the core shell structure for the detection of IR wavelengths, the absorption coefficient model by sub-bandgap transition is proposed. To enhance absorption coefficients at IR wavelengths, the Franz-Keldysh effect, the spatial confinement effect, and the impurity state and quasi-2D state transition are considered in our physical model. To validate our proposed model, we also provide the method to measure the absorption coefficient value using a lossy medium model. The measured value is close to the simulation results, with an absorption coefficient of 10/cm at 1480nm. These model and measurement results are very beneficial in designing high responsivity silicon IR detectors.
590
$a
School code: 0033.
650
4
$a
Engineering, Electronics and Electrical.
$3
845382
690
$a
0544
710
2
$a
University of California, San Diego.
$b
Electrical Engineering (Applied Physics).
$3
845487
773
0
$t
Dissertation Abstracts International
$g
73-02B.
790
1 0
$a
Lo, Yu-Hwa,
$e
advisor
790
1 0
$a
Cha, Jennifer
$e
committee member
790
1 0
$a
Cheng, Chung-Kuan
$e
committee member
790
1 0
$a
Taur, Yuan
$e
committee member
790
1 0
$a
Xiang, Jie
$e
committee member
790
$a
0033
791
$a
Ph.D.
792
$a
2011
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3478957
筆 0 讀者評論
多媒體
評論
新增評論
分享你的心得
Export
取書館別
處理中
...
變更密碼[密碼必須為2種組合(英文和數字)及長度為10碼以上]
登入