國立虎尾科技大學 |

Digital and analog fiber optic communications for CATV and FTTx applications

Record Type:	Language materials, printed : Monograph/item
Title/Author:	Digital and analog fiber optic communications for CATV and FTTx applications/ Avigdor Brillant.
Author:	Brillant, Avigdor.
Published:	Bellingham, Wash. (1000 20th St. Bellingham WA 98225-6705 USA) :SPIE, : c2008.,
Description:	1 online resource (xxxiv, 1055 p. : ill.) :digital file. :
Notes:	"SPIE digital library."
Subject:	Optical fiber subscriber loops. -
Online resource:	http://dx.doi.org/10.1117/3.732502
ISBN:	9780819481054 (electronic)

Digital and analog fiber optic communications for CATV and FTTx applications
Brillant, Avigdor.

Digital and analog fiber optic communications for CATV and FTTx applications[electronic resource] /Avigdor Brillant. - Bellingham, Wash. (1000 20th St. Bellingham WA 98225-6705 USA) :SPIE,c2008. - 1 online resource (xxxiv, 1055 p. : ill.) :digital file. - SPIE Press monograph ;PM174. - SPIE Press monograph ;PM103..

"SPIE digital library."

Includes bibliographical references and index.

Pt. 1. System Overview -- 1. WDM , Fiber to The X, and HFC Systems: a Technical Review -- Introduction -- Cable TV and Networks System Overview -- PON and its Variants.

Restricted to subscribers or individual electronic text purchasers.

This book is intended to provide a step-by-step guide to all design aspects and tradeoffs from theory to application for fiber-optics transceiver electronics. Presenting a compendium of information in a structured way, this book enables the engineer to develop a methodical design approach, a deep understanding of specifications parameters and the reasons behind them, as well as their effects and consequences on system performance, which are essential for proper component design. Further, a fundamental understanding of RF, digital circuit design, and linear and nonlinear phenomena is important in order to achieve the desired performance levels. Becoming familiar with solid-state devices and passives used to build optical receivers and transmitters is also important so one can effectively overcome design limitations.

Mode of access: World Wide Web.

ISBN: 9780819481054 (electronic)

Standard No.: 10.1117/3.732502doi

UkSubjects--Topical Terms:

716001
Optical fiber subscriber loops.

LC Class. No.: TK5103.592.O68 / B75 2008e

Dewey Class. No.: 621.382/75

Digital and analog fiber optic communications for CATV and FTTx applications
LDR:08428nam 2200637 a 4500 001 731081
003 SPIE
005 20100320142103.0
006 m e d
007 cr bn |||m|||a
008 130501s2008 waua fob 001 0 eng d
010 $z 2008019335
016 7 $z 014657596 $2 Uk
020 $a 9780819481054 (electronic)
020 $z 081946757X (alk. paper)
020 $z 9780819467577 (alk. paper)
024 7 $a 10.1117/3.732502 $2 doi
035 $a (OCoLC)606630375
035 $a (CaBNVSL)gtp00538574
035 $a 9780819481054
040 $a CaBNVSL $c CaBNVSL $d CaBNVSL
050 4 $a TK5103.592.O68 $b B75 2008e
082 0 4 $a 621.382/75 $2 22
100 1 $a Brillant, Avigdor. $3 716000
245 1 0 $a Digital and analog fiber optic communications for CATV and FTTx applications $h [electronic resource] / $c Avigdor Brillant.
260 $a Bellingham, Wash. (1000 20th St. Bellingham WA 98225-6705 USA) : $b SPIE, $c c2008.
300 $a 1 online resource (xxxiv, 1055 p. : ill.) : $b digital file.
490 1 $a SPIE Press monograph ; $v PM174
500 $a "SPIE digital library."
504 $a Includes bibliographical references and index.
505 0 $a Pt. 1. System Overview -- 1. WDM , Fiber to The X, and HFC Systems: a Technical Review -- Introduction -- Cable TV and Networks System Overview -- PON and its Variants.
505 0 $a 2. Basic Structure of Optical Transceivers -- Analog CATV Receiver and Coax Cables -- Analog CATV Return-Path Receiver and Transmitter -- Digital Transceiver -- ITR Digital Transceiver and Analog Receiver -- Architecture of Tunable Wavelength Transmitters.
505 0 $a 3. Introduction to CATV Standards and Concepts of Operation -- Television System Fundamentals -- Video Bandwidth and Spectrum Considerations of Color TV -- Digital TV and MPEG Standards -- NTSC Frequency Plan and Minimum System Requirements -- Basic NTSC TV Signal Testing.
505 0 $a Pt. 2. Semiconductors and Passives -- 4. Introduction to Optical Fibers and Passive Optical Fiber Components -- Single Mode Fiber -- Optical Fiber Connectors -- Optical Couplers -- WDM Multiplexers -- Optical Isolators and Circulators.
505 0 $a 5. Optics Modules and Lenses -- Planar Lightwave Circuits -- Free-Space Bulk Optical WDM Modules.
505 0 $a 6. Semiconductor Laser Diode Fundamentals -- Basic Laser Physics: Concepts of Operation -- Semiconductor Laser Structure: Gain Guided vs. Index Guided -- Longitudinal Modes and Fabry Perot (FP) Lasers -- Distributed Feedback (DFB) and Distributed Bragg Reflector (DBR) Lasers -- Multiple Quantum Well Lasers -- Vertical Cavity Surface Emitting Laser -- Tunable Lasers -- Laser Characteristics in RF -- Quantum Efficiency.
505 0 $a 7. Laser Dynamics: External Modulation for CATV and Fast Data Rates -- Dynamic Response of a Semiconductor Laser -- Large Signal Deviation from the Basic Model -- Amplitude-Phase Coupling (Chirp) -- Laser Distortions -- External Modulation.
505 0 $a 8. Photodetectors -- Photodetectors and Detection of General Background -- Junction Photodetector -- Avalanche Photodetector -- Bias Considerations -- Photodetection and Coherent Detection.
505 0 $a Pt. 3. RF and Control Concepts -- 9. Basic RF Definitions and IMD Effects on TV Picture -- Distortions and Dynamic Range -- 1-dB Compression Point and IP3 Relations -- Amplifier Gain Reduction due to Third-Order Nonlinearity -- Cross-Modulation Effects -- AM-to-PM Effects -- Multitone CTB Relations -- RF Lineups, NF Calculations and Considerations -- RF Lineups, P1dB and IP3 Calculations and Considerations -- Mismatch Effects -- CSO and CTB Distortion Effects on TV Picture.
505 0 $a 10. Introduction to Receiver Front-End Noise Modeling -- Noise Analysis Basics -- Noise Sources in an Optical Receiver -- Thermal Noise (Johnson Noise) -- Shot Noise -- 1/f Noise -- Carrier to Noise Ratio -- PIN Photodetector Noise Modeling -- APD Photodetector Noise Modeling -- Receiver Front-End Design Considerations.
505 0 $a 11. Amplifier Analysis and Design Concepts -- Noise Parameters of a Two-Port Device -- Two-Port Network Matching to Minimum Noise -- Noise Modeling of MESFET -- Noise Modeling of Bipolar Junction Transistors -- MESFET Feedback Amplifier -- Distributed Amplifier -- Operational Transimpedance Amplifiers PIN TIA -- Biasing Methods -- Equalizers and Optimum placement of Equalizers -- Matched PIN VVA -- Examples For Noise Analysis CMOS and BJT RF IC Designs.
505 0 $a 12. AGC Topologies and Concepts -- Feed Forward (FF) Automatic Gain Control (AGC) -- Feedback AGC.
505 0 $a 13. Laser Power and Temperature Control Loops -- Automatic-Power-Control Loop -- Thermoelectric Cooler (TEC) Control.
505 0 $a Pt. 4. Introduction to CATV MODEM and Transmitters -- 14. Quadrature Amplitude Modulation (QAM) in CATV Optical Transmitters -- Quadrature Modulators -- Generating FM using QPSK Modulators -- Digital QAM -- Signal Impairments and Effects -- Jitter-to-Phase-Noise Relationship-- Residual AM Effects -- Nonlinear Effects -- EVM and MER -- BER of M-ary QAM -- Relationship Between Eb/No to C/N -- BER vs. Eb/No to C/N Performance Limits -- EVM relations to C/N.
505 0 $a 15. Introduction to CATV MODEM -- QAM MODEM Block Diagram -- MPEG Scrambler/Descrambler -- Codes Concept -- Reed-Solomon Codes -- Interleaver/Deinterleaver -- Trellis-Coded Modulation -- M-ary QAM Transmitter Design -- M-ary QAM Receiver Design.
505 0 $a 16. Linearization Techniques -- Electronic Linearization Methods in CATV Transmitters -- Push-Pull -- Optical Linearization Methods in CATV Transmitters -- CATV Transmitter Structure.
505 0 $a 17. System Link Budget Calculation and Impairment Aspects -- Link Design Calculations -- Clipping-Induced Nonlinear Distortions -- Bursts of Nonlinear Distortions -- Multiple Optical Reflections -- Dispersion-Induced Nonlinear Distortions -- Optical Fiber and Optics Nonlinear Effects -- CATV/Data Transport Coexistence.
505 0 $a Pt. 5. Digital Transceivers Performance -- 18. Introduction to Digital Data Signals and Design Constraints -- Eye Analysis and BER -- Extinction Ratio -- Mode Partition -- Timing Jitter -- Relative Intensity Noise -- Minimum Detectable Signal and Optical Power -- Digital Through Analogue -- Data Formats -- Clock and Data Recovery.
505 0 $a 19. Transceivers and Tunable Wavelength Transceiver Modules -- Burst Mode -- Wavelength Lockers and Wavelength Control Loop -- Transceiver Housing TOSA ROSA Structure and Integration.
505 0 $a Pt. 6. Integration and Testing -- 20. Cross-Talk Isolation -- Introduction -- Desensitization in Wideband Systems with Overlapping Rx/Tx BW -- Wideband PRBS NRZ Interference Analysis -- EMI RFI Sources Theory For Shielding -- GND Discipline Theory for Shielding and Minimum Emission -- Emission and Reception Mechanisms in Integrated Modules -- Differential Signal -- Important Definitions and Guidelines -- A Brief Discussion about Transmission Lines.
505 0 $a 21. Test Setups -- CATV Power Measurement Units -- OMI Calibration using PD -- Two-Tone Test -- Multitone Test -- AGC Calibration Using Pilot Tone -- Feedback AGC Performance under a Video-Modulated Signal -- Cross-Talk Test Methods -- Understanding Analog Receiver Specification.
506 $a Restricted to subscribers or individual electronic text purchasers.
520 $a This book is intended to provide a step-by-step guide to all design aspects and tradeoffs from theory to application for fiber-optics transceiver electronics. Presenting a compendium of information in a structured way, this book enables the engineer to develop a methodical design approach, a deep understanding of specifications parameters and the reasons behind them, as well as their effects and consequences on system performance, which are essential for proper component design. Further, a fundamental understanding of RF, digital circuit design, and linear and nonlinear phenomena is important in order to achieve the desired performance levels. Becoming familiar with solid-state devices and passives used to build optical receivers and transmitters is also important so one can effectively overcome design limitations.
530 $a Also available in print version.
538 $a Mode of access: World Wide Web.
538 $a System requirements: Adobe Acrobat Reader.
588 $a Title from PDF t.p. (viewed on Feb. 25, 2010).
650 0 $a Optical fiber subscriber loops. $3 716001
650 0 $a Cable television $x Equipment and supplies. $3 716002
650 0 $a Fiber optic cables. $3 655318
650 0 $a Optoelectronic devices. $3 639784
710 2 $a Society of Photo-optical Instrumentation Engineers. $3 700253
830 0 $a SPIE Press monograph ; $v PM103. $3 877204
856 4 0 $u http://dx.doi.org/10.1117/3.732502