國立虎尾科技大學 |

Network convergence = Ethernet applications and next generation packet transport architectures /

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Network convergence/ Vinod Joseph and Srinivas Mulugu.
其他題名:	Ethernet applications and next generation packet transport architectures /
作者:	Joseph, Vinod.
其他作者:	Mulugu, Srinivas.
出版者:	Boston :Morgan Kaufmann, : c2014.,
面頁冊數:	ix, 585 p. :ill. ; : 24 cm.;
標題:	Ethernet (Local area network system) -
電子資源:	http://www.sciencedirect.com/science/book/9780123978776
ISBN:	9780123978776 (electronic bk.)

Network convergence = Ethernet applications and next generation packet transport architectures /
Joseph, Vinod.

Network convergenceEthernet applications and next generation packet transport architectures /[electronic resource] :Vinod Joseph and Srinivas Mulugu. - Boston :Morgan Kaufmann,c2014. - ix, 585 p. :ill. ;24 cm.

Includes bibliographical references and index.

"Before we get into VPLS, let us take a quick look at MPLS Layer 2 VPNs also referred to as Point-Point services. A point-to-point L2VPN circuit, as defined by the PWE3 working group, is a provider service that offers a point-to-point service infrastructure over an IP/MPLS packet switched network. The PWE3 working group of the IETF describes mechanisms on how to deliver L2 VPN services across a packet switches IP/MPLS network. The basic reference model is outlined in the picture below. A pseudo-wire (PW) is a connection between two provider edge (PE) devices, which connects two attachment circuits (ACs). An AC can be a Frame Relay DLCI, an ATM VPI/VCI, an Ethernet port, a VLAN, a HDLC, a PPP connection on a physical interface, a PPP session from an L2TP tunnel, an MPLS LSP, etc. During the setup of a PW, the two PE routers will be configured or will automatically exchange information about the service to be emulated so that later they know how to process packets coming from the other end. The PE routers use Targeted LDP sessions for setting the PW. After a PW is set up between two PE routers, frames received by one PE from an AC are encapsulated and sent over the PW to the remote PE, where native frames are re-constructed and forwarded to the other CE"--

ISBN: 9780123978776 (electronic bk.)

LCCN: 2013025197Subjects--Topical Terms:

562312
Ethernet (Local area network system)

LC Class. No.: TK5105.383 / .J68 2014

Dewey Class. No.: 004.6

Network convergence = Ethernet applications and next generation packet transport architectures /
LDR:02076cam a2200229 a 4500 001 797513
005 20140701154441.0
008 150518s2014 maua sb 001 0 eng
010 $a 2013025197
020 $a 9780123978776 (electronic bk.)
020 $a 9780123978776
035 $a 14000354
040 $a DLC $c DLC $d DLC
041 0 $a eng
042 $a pcc
050 0 0 $a TK5105.383 $b .J68 2014
082 0 0 $a 004.6 $2 23
100 1 $a Joseph, Vinod. $3 719525
245 1 0 $a Network convergence $h [electronic resource] : $b Ethernet applications and next generation packet transport architectures / $c Vinod Joseph and Srinivas Mulugu.
260 $a Boston : $b Morgan Kaufmann, $c c2014.
300 $a ix, 585 p. : $b ill. ; $c 24 cm.
504 $a Includes bibliographical references and index.
520 $a "Before we get into VPLS, let us take a quick look at MPLS Layer 2 VPNs also referred to as Point-Point services. A point-to-point L2VPN circuit, as defined by the PWE3 working group, is a provider service that offers a point-to-point service infrastructure over an IP/MPLS packet switched network. The PWE3 working group of the IETF describes mechanisms on how to deliver L2 VPN services across a packet switches IP/MPLS network. The basic reference model is outlined in the picture below. A pseudo-wire (PW) is a connection between two provider edge (PE) devices, which connects two attachment circuits (ACs). An AC can be a Frame Relay DLCI, an ATM VPI/VCI, an Ethernet port, a VLAN, a HDLC, a PPP connection on a physical interface, a PPP session from an L2TP tunnel, an MPLS LSP, etc. During the setup of a PW, the two PE routers will be configured or will automatically exchange information about the service to be emulated so that later they know how to process packets coming from the other end. The PE routers use Targeted LDP sessions for setting the PW. After a PW is set up between two PE routers, frames received by one PE from an AC are encapsulated and sent over the PW to the remote PE, where native frames are re-constructed and forwarded to the other CE"-- $c Provided by publisher.
650 0 $a Ethernet (Local area network system) $3 562312
650 0 $a Packet transport networks. $3 1004623
650 0 $a Computer network architectures. $3 565372
650 0 $a Convergence (Telecommunication) $3 574469
650 0 $a Internetworking (Telecommunication) $3 596705
700 1 $a Mulugu, Srinivas. $3 903330
856 4 0 $u http://www.sciencedirect.com/science/book/9780123978776