國立虎尾科技大學 |

Rolling contact fatigue in a vacuum = test equipment and coating analysis /

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Rolling contact fatigue in a vacuum/ by Michael Danyluk, Anoop Dhingra.
其他題名:	test equipment and coating analysis /
作者:	Danyluk, Michael.
其他作者:	Dhingra, Anoop.
出版者:	Cham :Springer International Publishing : : 2015.,
面頁冊數:	xii, 167 p. :ill. (some col.), digital ; : 24 cm.;
Contained By:	Springer eBooks
標題:	Mechanical wear - Testing. -
電子資源:	http://dx.doi.org/10.1007/978-3-319-11930-4
ISBN:	9783319119304 (electronic bk.)

Rolling contact fatigue in a vacuum = test equipment and coating analysis /
Danyluk, Michael.

Rolling contact fatigue in a vacuumtest equipment and coating analysis /[electronic resource] :by Michael Danyluk, Anoop Dhingra. - Cham :Springer International Publishing :2015. - xii, 167 p. :ill. (some col.), digital ;24 cm.

Introduction -- Vacuum chamber design -- Rolling Contact Testing of Ball Bearing Elements -- Rolling Contact Fatigue in High Vacuum -- Coating Thickness Calculation and Adhesion -- Ion Plating Process Model -- Effects of Process Parameters on Flm RCF Life -- Real Time Process Control.

This book deals with wear and performance testing of thin solid film lubrication and hard coatings in an ultra-high vacuum (UHV), a process which enables rapid accumulation of stress cycles compared with testing in oil at atmospheric pressure. The authors' lucid and authoritative narrative broadens readers' understanding of the benefits of UHV testing: a cleaner, shorter test is achieved in high vacuum, disturbance rejection by the deposition controller may be optimized for maximum fatigue life of the coating using rolling contact fatigue testing (RCF) in a high vacuum, and RCF testing in UHV conditions enables a faster study of deposition control parameters. In short, Rolling Contact Fatigue in a Vacuum is an indispensable resource for researchers and engineers concerned with thin film deposition, solar flat panel manufacturing, physical vapor deposition, MEMS manufacturing (for lubrication of MEMS), tribology in a range of industries, and automotive and marine wear coatings for engines and transmissions. This book also: Illustrates rolling contact fatigue testing in an ultra-high vacuum Demonstrates testing at rotational speeds up to 7800 RPM without oil as a lubricant Explores process control using in situ plasma monitoring Elucidates controller optimization and hardware-in-the-loop testing applied to deposition processing Analyzes and explains investigative tools testing in an ultra-high vacuum.

ISBN: 9783319119304 (electronic bk.)

Standard No.: 10.1007/978-3-319-11930-4doiSubjects--Topical Terms:

1063947
Mechanical wear
--Testing.

LC Class. No.: TA418.4

Dewey Class. No.: 620.11292

Rolling contact fatigue in a vacuum = test equipment and coating analysis /
LDR:02732nam a2200325 a 4500 001 835006
003 DE-He213
005 20150703115456.0
006 m d
007 cr nn 008maaau
008 160421s2015 gw s 0 eng d
020 $a 9783319119304 (electronic bk.)
020 $a 9783319119298 (paper)
024 7 $a 10.1007/978-3-319-11930-4 $2 doi
035 $a 978-3-319-11930-4
040 $a GP $c GP
041 0 $a eng
050 4 $a TA418.4
072 7 $a TGBF $2 bicssc
072 7 $a TEC021000 $2 bisacsh
072 7 $a TEC009070 $2 bisacsh
082 0 4 $a 620.11292 $2 23
090 $a TA418.4 $b .D198 2015
100 1 $a Danyluk, Michael. $3 1063945
245 1 0 $a Rolling contact fatigue in a vacuum $h [electronic resource] : $b test equipment and coating analysis / $c by Michael Danyluk, Anoop Dhingra.
260 $a Cham : $c 2015. $b Springer International Publishing : $b Imprint: Springer,
300 $a xii, 167 p. : $b ill. (some col.), digital ; $c 24 cm.
505 0 $a Introduction -- Vacuum chamber design -- Rolling Contact Testing of Ball Bearing Elements -- Rolling Contact Fatigue in High Vacuum -- Coating Thickness Calculation and Adhesion -- Ion Plating Process Model -- Effects of Process Parameters on Flm RCF Life -- Real Time Process Control.
520 $a This book deals with wear and performance testing of thin solid film lubrication and hard coatings in an ultra-high vacuum (UHV), a process which enables rapid accumulation of stress cycles compared with testing in oil at atmospheric pressure. The authors' lucid and authoritative narrative broadens readers' understanding of the benefits of UHV testing: a cleaner, shorter test is achieved in high vacuum, disturbance rejection by the deposition controller may be optimized for maximum fatigue life of the coating using rolling contact fatigue testing (RCF) in a high vacuum, and RCF testing in UHV conditions enables a faster study of deposition control parameters. In short, Rolling Contact Fatigue in a Vacuum is an indispensable resource for researchers and engineers concerned with thin film deposition, solar flat panel manufacturing, physical vapor deposition, MEMS manufacturing (for lubrication of MEMS), tribology in a range of industries, and automotive and marine wear coatings for engines and transmissions. This book also: Illustrates rolling contact fatigue testing in an ultra-high vacuum Demonstrates testing at rotational speeds up to 7800 RPM without oil as a lubricant Explores process control using in situ plasma monitoring Elucidates controller optimization and hardware-in-the-loop testing applied to deposition processing Analyzes and explains investigative tools testing in an ultra-high vacuum.
650 0 $a Mechanical wear $x Testing. $3 1063947
650 0 $a Rolling contact. $3 1029382
650 0 $a Materials $x Fatigue. $3 671013
650 0 $a Vacuum technology. $3 678462
650 1 4 $a Materials Science. $3 671087
650 2 4 $a Tribology, Corrosion and Coatings. $3 673589
650 2 4 $a Surfaces and Interfaces, Thin Films. $3 671207
650 2 4 $a Operating Procedures, Materials Treatment. $3 677035
650 2 4 $a Automotive Engineering. $3 683772
650 2 4 $a Manufacturing, Machines, Tools. $3 670281
700 1 $a Dhingra, Anoop. $3 1063946
710 2 $a SpringerLink (Online service) $3 593884
773 0 $t Springer eBooks
856 4 0 $u http://dx.doi.org/10.1007/978-3-319-11930-4
950 $a Chemistry and Materials Science (Springer-11644)