國立虎尾科技大學 |

Magnetic control of tokamak plasmas

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Magnetic control of tokamak plasmas/ by Marco Ariola, Alfredo Pironti.
作者:	Ariola, Marco.
其他作者:	Pironti, Alfredo.
出版者:	Cham :Springer International Publishing : : 2016.,
面頁冊數:	xv, 203 p. :ill., digital ; : 24 cm.;
Contained By:	Springer eBooks
標題:	Tokamaks. -
電子資源:	http://dx.doi.org/10.1007/978-3-319-29890-0
ISBN:	9783319298900

Magnetic control of tokamak plasmas
Ariola, Marco.

Magnetic control of tokamak plasmas[electronic resource] /by Marco Ariola, Alfredo Pironti. - Cham :Springer International Publishing :2016. - xv, 203 p. :ill., digital ;24 cm. - Advances in industrial control,1430-9491. - Advances in industrial control..

Introduction -- Part I Plasma Modelling -- Plasma Modelling for Magnetic Control -- Modelling of Resistive Wall Modes -- The Plasma Boundary and Its Identification -- Part II Plasma Control -- Plasma Magnetic Control Problem -- Plasma Position and Current Control for Limiter Plasmas -- Plasma Vertical Stabilization -- Plasma Shape Control for ITER -- Plasma Shape Control at TCV -- Plasma Shape Control at JET -- Control of Resistive Wall Modes -- Appendices: Some Mathematical Background; Units Used in Plasma Physics.

This book is a complete treatment of work done to resolve the problems of position-, current-, and shape-control of plasma in tokamak-type (toroidal) devices being studied as a potential means of commercial energy production by nuclear fusion. Modelling and control are both detailed, allowing non-expert readers to understand the control problem. Starting from the magneto-hydro-dynamic equations, all the steps needed for the derivation of plasma state-space models are enumerated with frequent recall of the basic concepts of electromagnetics. The control problem is then described, beginning with the control of current and position--vertical and radial--control and progressing to the more challenging shape control. The solutions proposed vary from simple PIDs to more sophisticated MIMO controllers. The second edition of Magnetic Control of Tokamak Plasmas contains numerous updates and a substantial amount of completely new material covering areas such as: modelling and control of resistive wall modes--the most important non-axisimmetric mode; the isoflux approach for shape control; a general approach for the control of limiter plasmas; the use of inner vessel coils for vertical stabilization; and significantly enhanced treatment of plasma-shape control at JET, including experimental results and introducing a method implemented for operation in the presence of current saturations. Whenever possible, coverage of the various topics is rounded out with experimental results obtained on currently existing tokamaks. The book also includes a presentation of the typical actuators and sensors used for control purposes in tokamaks. Some mathematical details are given in the appendices for the interested reader. The ideas formulated in this monograph will be of great practical help to control engineers, academic researchers and graduate students working directly with problems related to the control of nuclear fusion. They will also stimulate control researchers interested more generally in the advanced applications of the discipline. Advances in industrial control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

ISBN: 9783319298900

Standard No.: 10.1007/978-3-319-29890-0doiSubjects--Topical Terms:

681729
Tokamaks.

LC Class. No.: TK9204

Dewey Class. No.: 621.484

Magnetic control of tokamak plasmas
LDR:03908nam a2200337 a 4500 001 862521
003 DE-He213
005 20160825090616.0
006 m d
007 cr nn 008maaau
008 170720s2016 gw s 0 eng d
020 $a 9783319298900 $q (electronic bk.)
020 $a 9783319298887 $q (paper)
024 7 $a 10.1007/978-3-319-29890-0 $2 doi
035 $a 978-3-319-29890-0
040 $a GP $c GP
041 0 $a eng
050 4 $a TK9204
072 7 $a THK $2 bicssc
072 7 $a TEC028000 $2 bisacsh
082 0 4 $a 621.484 $2 23
090 $a TK9204 $b .A712 2016
100 1 $a Ariola, Marco. $3 681728
245 1 0 $a Magnetic control of tokamak plasmas $h [electronic resource] / $c by Marco Ariola, Alfredo Pironti.
250 $2 nd ed.
260 $a Cham : $c 2016. $b Springer International Publishing : $b Imprint: Springer,
300 $a xv, 203 p. : $b ill., digital ; $c 24 cm.
490 1 $a Advances in industrial control, $x 1430-9491
505 0 $a Introduction -- Part I Plasma Modelling -- Plasma Modelling for Magnetic Control -- Modelling of Resistive Wall Modes -- The Plasma Boundary and Its Identification -- Part II Plasma Control -- Plasma Magnetic Control Problem -- Plasma Position and Current Control for Limiter Plasmas -- Plasma Vertical Stabilization -- Plasma Shape Control for ITER -- Plasma Shape Control at TCV -- Plasma Shape Control at JET -- Control of Resistive Wall Modes -- Appendices: Some Mathematical Background; Units Used in Plasma Physics.
520 $a This book is a complete treatment of work done to resolve the problems of position-, current-, and shape-control of plasma in tokamak-type (toroidal) devices being studied as a potential means of commercial energy production by nuclear fusion. Modelling and control are both detailed, allowing non-expert readers to understand the control problem. Starting from the magneto-hydro-dynamic equations, all the steps needed for the derivation of plasma state-space models are enumerated with frequent recall of the basic concepts of electromagnetics. The control problem is then described, beginning with the control of current and position--vertical and radial--control and progressing to the more challenging shape control. The solutions proposed vary from simple PIDs to more sophisticated MIMO controllers. The second edition of Magnetic Control of Tokamak Plasmas contains numerous updates and a substantial amount of completely new material covering areas such as: modelling and control of resistive wall modes--the most important non-axisimmetric mode; the isoflux approach for shape control; a general approach for the control of limiter plasmas; the use of inner vessel coils for vertical stabilization; and significantly enhanced treatment of plasma-shape control at JET, including experimental results and introducing a method implemented for operation in the presence of current saturations. Whenever possible, coverage of the various topics is rounded out with experimental results obtained on currently existing tokamaks. The book also includes a presentation of the typical actuators and sensors used for control purposes in tokamaks. Some mathematical details are given in the appendices for the interested reader. The ideas formulated in this monograph will be of great practical help to control engineers, academic researchers and graduate students working directly with problems related to the control of nuclear fusion. They will also stimulate control researchers interested more generally in the advanced applications of the discipline. Advances in industrial control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
650 0 $a Tokamaks. $3 681729
650 0 $a Feedback control systems. $3 596555
650 0 $a Electromagnetic induction. $3 681730
650 1 4 $a Energy. $3 784773
650 2 4 $a Nuclear Energy. $3 883468
650 2 4 $a Control. $3 782232
650 2 4 $a Nuclear Fusion. $3 672686
650 2 4 $a Nuclear Engineering. $3 670863
650 2 4 $a Atomic, Molecular, Optical and Plasma Physics. $3 782572
700 1 $a Pironti, Alfredo. $3 681731
710 2 $a SpringerLink (Online service) $3 593884
773 0 $t Springer eBooks
830 0 $a Advances in industrial control. $3 639855
856 4 0 $u http://dx.doi.org/10.1007/978-3-319-29890-0
950 $a Energy (Springer-40367)