國立虎尾科技大學 |

Phase Transformations During Cooling of Automotive Steels.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Phase Transformations During Cooling of Automotive Steels./
作者:	Padgett, Matthew C.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
面頁冊數:	73 p.
附註:	Source: Masters Abstracts International, Volume: 57-01.
Contained By:	Masters Abstracts International57-01(E).
標題:	Materials science. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10272074
ISBN:	9780355351811

Phase Transformations During Cooling of Automotive Steels.
Padgett, Matthew C.

Phase Transformations During Cooling of Automotive Steels. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 73 p.

Source: Masters Abstracts International, Volume: 57-01.

Thesis (M.S.)--The University of Alabama, 2017.

This thesis explores the effect of cooling rate on the microstructure and phases in advanced high strength steels (AHSS). In the manufacturing of automobiles, the primary joining mechanism for steel is resistance spot welding (RSW), a process that produces a high heat input and rapid cooling in the welded metal. The effect of RSW on the microstructure of these material systems is critical to understanding their mechanical properties. A dual phase steel, DP-600, and a transformation induced plasticity bainitic-ferritic steel, TBF-1180, were studied to assess the changes to their microstructure that take place in controlled cooling environments and in uncontrolled cooling environments, i.e. resistance spot welding. Continuous cooling transformation (CCT) diagrams were developed using strip specimens of DP-600 and TBF-1180 to determine the phase transformations that occur as a function of cooling rate. The resulting phases were determined using a thermal-mechanical simulator and dilatometry, combined with light optical microscopy and hardness measurements. The resulting phases were compared with RSW specimens where cooling rate was controlled by varying the welding time for two-plate welds. Comparisons were drawn between experimental welds of DP-600 and simulations performed using a commercial welding software. The type and quantity of phases present after RSW were examined using a variety of techniques, including light optical microscopy using several etchants, hardness measurements, and x-ray diffraction (XRD).

ISBN: 9780355351811Subjects--Topical Terms:

557839
Materials science.

Phase Transformations During Cooling of Automotive Steels.
LDR:02437nam a2200301 4500 001 890676
005 20180727091502.5
008 180907s2017 ||||||||||||||||| ||eng d
020 $a 9780355351811
035 $a (MiAaPQ)AAI10272074
035 $a (MiAaPQ)alatus:13130
035 $a AAI10272074
040 $a MiAaPQ $c MiAaPQ
100 1 $a Padgett, Matthew C. $3 1148516
245 1 0 $a Phase Transformations During Cooling of Automotive Steels.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 73 p.
500 $a Source: Masters Abstracts International, Volume: 57-01.
500 $a Adviser: Luke N. Brewer.
502 $a Thesis (M.S.)--The University of Alabama, 2017.
520 $a This thesis explores the effect of cooling rate on the microstructure and phases in advanced high strength steels (AHSS). In the manufacturing of automobiles, the primary joining mechanism for steel is resistance spot welding (RSW), a process that produces a high heat input and rapid cooling in the welded metal. The effect of RSW on the microstructure of these material systems is critical to understanding their mechanical properties. A dual phase steel, DP-600, and a transformation induced plasticity bainitic-ferritic steel, TBF-1180, were studied to assess the changes to their microstructure that take place in controlled cooling environments and in uncontrolled cooling environments, i.e. resistance spot welding. Continuous cooling transformation (CCT) diagrams were developed using strip specimens of DP-600 and TBF-1180 to determine the phase transformations that occur as a function of cooling rate. The resulting phases were determined using a thermal-mechanical simulator and dilatometry, combined with light optical microscopy and hardness measurements. The resulting phases were compared with RSW specimens where cooling rate was controlled by varying the welding time for two-plate welds. Comparisons were drawn between experimental welds of DP-600 and simulations performed using a commercial welding software. The type and quantity of phases present after RSW were examined using a variety of techniques, including light optical microscopy using several etchants, hardness measurements, and x-ray diffraction (XRD).
590 $a School code: 0004.
650 4 $a Materials science. $3 557839
650 4 $a Automotive engineering. $3 1104081
690 $a 0794
690 $a 0540
710 2 $a The University of Alabama. $b Metallurgical Engineering. $3 1148517
773 0 $t Masters Abstracts International $g 57-01(E).
790 $a 0004
791 $a M.S.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10272074