國立虎尾科技大學 |

CFD analysis of novel variable compression ratio rotary engine.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	CFD analysis of novel variable compression ratio rotary engine./
作者:	Panchal, Parth K.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
面頁冊數:	88 p.
附註:	Source: Dissertation Abstracts International, Volume: 75-01C.
Contained By:	Dissertation Abstracts International75-01C.
標題:	Mechanical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10625556

CFD analysis of novel variable compression ratio rotary engine.
Panchal, Parth K.

CFD analysis of novel variable compression ratio rotary engine. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 88 p.

Source: Dissertation Abstracts International, Volume: 75-01C.

Thesis (M.A.Sc.)--Queen's University (Canada), 2017.

In compression ignition engines, the soot-NOx paradox is an extremely challenging unresolved issue. Homogeneous Charge Compression Ignition (HCCI) is one of the most promising solutions that combine the benefits of both Spark ignition and Compression ignition combustion modes. Fuel-lean premixed combustion helps to reduce or eliminate the formation of NOx and soot. HCCI engines have a high heat release rate at high load that results in knock. A unique variable compression ratio rotary engine based on the HCCI combustion mode (patented by Customachinery Inc) is under development at Queen's University. The present study includes a computational fluid dynamics analysis of the air induction and compression, fuel injection, fuel and air mixing, and ignition process using Ansys Fluent. A unique dynamic mesh was adopted that allowed for the modeling of a fixed stator and rotating lobed rotor, as well as novel gates that extend and retract. A default Fluent fuel spray model was used and the optimum fuel injector location and orientation were determined. Two different combustion models (single-step and detailed chemistry) were investigated, and it was found that the results have significant differences. The detailed chemistry predicted a two-stage ignition process typical for heptane fuel that a single-step model cannot predict. The effect of other parameters such as compression ratio, fuel load, and fuel injection time on the ignition and combustion process were also studied.Subjects--Topical Terms:

557493
Mechanical engineering.

CFD analysis of novel variable compression ratio rotary engine.
LDR:02331nam a2200265 4500 001 890731
005 20180727091502.5
008 180907s2017 ||||||||||||||||| ||eng d
035 $a (MiAaPQ)AAI10625556
035 $a (MiAaPQ)QueensUCan197415876
035 $a AAI10625556
040 $a MiAaPQ $c MiAaPQ
100 1 $a Panchal, Parth K. $3 1148612
245 1 0 $a CFD analysis of novel variable compression ratio rotary engine.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 88 p.
500 $a Source: Dissertation Abstracts International, Volume: 75-01C.
502 $a Thesis (M.A.Sc.)--Queen's University (Canada), 2017.
520 $a In compression ignition engines, the soot-NOx paradox is an extremely challenging unresolved issue. Homogeneous Charge Compression Ignition (HCCI) is one of the most promising solutions that combine the benefits of both Spark ignition and Compression ignition combustion modes. Fuel-lean premixed combustion helps to reduce or eliminate the formation of NOx and soot. HCCI engines have a high heat release rate at high load that results in knock. A unique variable compression ratio rotary engine based on the HCCI combustion mode (patented by Customachinery Inc) is under development at Queen's University. The present study includes a computational fluid dynamics analysis of the air induction and compression, fuel injection, fuel and air mixing, and ignition process using Ansys Fluent. A unique dynamic mesh was adopted that allowed for the modeling of a fixed stator and rotating lobed rotor, as well as novel gates that extend and retract. A default Fluent fuel spray model was used and the optimum fuel injector location and orientation were determined. Two different combustion models (single-step and detailed chemistry) were investigated, and it was found that the results have significant differences. The detailed chemistry predicted a two-stage ignition process typical for heptane fuel that a single-step model cannot predict. The effect of other parameters such as compression ratio, fuel load, and fuel injection time on the ignition and combustion process were also studied.
590 $a School code: 0283.
650 4 $a Mechanical engineering. $3 557493
690 $a 0548
710 2 $a Queen's University (Canada). $3 1148613
773 0 $t Dissertation Abstracts International $g 75-01C.
790 $a 0283
791 $a M.A.Sc.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10625556