國立虎尾科技大學 |

Optical sub-diffraction limited focusing for confined heating and lithography.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Optical sub-diffraction limited focusing for confined heating and lithography./
作者:	Traverso, Luis M.
面頁冊數:	1 online resource (127 pages)
附註:	Source: Dissertation Abstracts International, Volume: 78-08(E), Section: B.
Contained By:	Dissertation Abstracts International78-08B(E).
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9781369640670

Optical sub-diffraction limited focusing for confined heating and lithography.
Traverso, Luis M.

Optical sub-diffraction limited focusing for confined heating and lithography. - 1 online resource (127 pages)

Source: Dissertation Abstracts International, Volume: 78-08(E), Section: B.

Thesis (Ph.D.)

Includes bibliographical references

Electronics and nanotechnology is constantly demanding a decrease in size of fabricated nanoscale features. This decrease in size has become much more difficult recently due to the limited resolution of optical systems that are fundamental to many nanofabrication methods. A lot of effort has been made to fabricate devices smaller than the diffraction limit of light. Creating devices that are capable of confining fields by means of interference patterns of propagating wave modes and surface plasmon, has proven successful to confine light into smaller spot sizes.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9781369640670Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Optical sub-diffraction limited focusing for confined heating and lithography.
LDR:03845ntm a2200385Ki 4500 001 908643
005 20180330125240.5
006 m o u
007 cr mn||||a|a||
008 190606s2016 xx obm 000 0 eng d
020 $a 9781369640670
035 $a (MiAaPQ)AAI10195841
035 $a (MiAaPQ)purdue:20676
035 $a AAI10195841
040 $a MiAaPQ $b eng $c MiAaPQ
099 $a TUL $f hyy $c available through World Wide Web
100 1 $a Traverso, Luis M. $3 1178877
245 1 0 $a Optical sub-diffraction limited focusing for confined heating and lithography.
264 0 $c 2016
300 $a 1 online resource (127 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 78-08(E), Section: B.
500 $a Includes supplementary digital materials.
500 $a Adviser: Xianfan Xu.
502 $a Thesis (Ph.D.) $c Purdue University $d 2016.
504 $a Includes bibliographical references
520 $a Electronics and nanotechnology is constantly demanding a decrease in size of fabricated nanoscale features. This decrease in size has become much more difficult recently due to the limited resolution of optical systems that are fundamental to many nanofabrication methods. A lot of effort has been made to fabricate devices smaller than the diffraction limit of light. Creating devices that are capable of confining fields by means of interference patterns of propagating wave modes and surface plasmon, has proven successful to confine light into smaller spot sizes.
520 $a Zone plate diffraction lenses generate spots with dimensions very close to the diffraction limit. We report the fabrication of zone plates to be used in laser direct writing of silicon nanowires. We show experimentally and with numerical models that a silicon substrate subjected to a focused spot is capable of reaching the necessary temperature for the synthesis of silicon nanowires with widths of 60 nm, which is considerably smaller than the diffraction limit of the processing laser.
520 $a Nanoscale ridge apertures are devices with a great potential to confine light energy. Such apertures have been experimentally proven to create very small lithography features. We believe that these apertures can be further modified in order to achieve a practical smaller confinement in the near field region. In this thesis we discuss several attempts to design and fabricate apertures with sharp edges and implement them in a previously reported parallel lithography setup. In an attempt to use apertures for parallel fabrication of patterns, we developed a system to control the position of the near-field region with respect to a lithography substrate. To do this we use a method of interferometric-spatial- phase-imaging (ISPI). With the implementation of this method we were able to produce an array of 32X32 lines with confined widths as small as 22 nm. Nanoscale ridge apertures were also studied to be used as near field transducers for heat-assisted magnetic recording. They have the capability of transmitting and confining enough energy to increase the temperature of a recording medium without reaching detrimental temperatures themselves. Numerical methods are presented to prove theoretically that a well-designed aperture performs well as a near field transducer. The size of the spot region focused by the aperture could allow us to record data with higher area density than current conventional methods.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
650 4 $a Nanotechnology. $3 557660
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
690 $a 0652
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Purdue University. $b Mechanical Engineering. $3 845672
773 0 $t Dissertation Abstracts International $g 78-08B(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10195841 $z click for full text (PQDT)