國立虎尾科技大學 |

Nanofabrication and Nanopatterning of Carbon Nanomaterials for Flexible Electronics.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Nanofabrication and Nanopatterning of Carbon Nanomaterials for Flexible Electronics./
作者:	Ding, Junjun.
面頁冊數:	1 online resource (138 pages)
附註:	Source: Dissertation Abstracts International, Volume: 78-12(E), Section: B.
Contained By:	Dissertation Abstracts International78-12B(E).
標題:	Nanotechnology. -
電子資源:	click for full text (PQDT)
ISBN:	9780355096262

Nanofabrication and Nanopatterning of Carbon Nanomaterials for Flexible Electronics.
Ding, Junjun.

Nanofabrication and Nanopatterning of Carbon Nanomaterials for Flexible Electronics. - 1 online resource (138 pages)

Source: Dissertation Abstracts International, Volume: 78-12(E), Section: B.

Thesis (Ph.D.)

Includes bibliographical references

Stretchable electrodes have increasingly drawn attention as a vital component for flexible electronic devices. Carbon nanomaterials such as graphene and carbon nanotubes (CNTs) exhibit properties such as high mechanical flexibility and strength, optical transparency, and electrical conductivity which are naturally required for stretchable electrodes. Graphene growth, nanopatterning, and transfer processes are important steps to use graphene as flexible electrodes. However, advances in the large-area nanofabrication and nanopatterning of carbon nanomaterials such as graphene are necessary to realize the full potential of this technology. In particular, laser interference lithography (LIL), a fast and low cost large-area nanoscale patterning technique, shows tremendous promise for the patterning of graphene and other nanostructures for numerous applications. First, it was demonstrated that large-area nanopatterning and the transfer of chemical vapor deposition (CVD) grown graphene via LIL and plasma etching provide a reliable method to provide large area nanoengineered graphene on various target substrates. Then, to improve the electrode performance under large strain (naturally CVD grown graphene sheet will crack at tensile strains larger than 1%), a corrugated graphene structure on PDMS was designed, fabricated, and tested, with experimental results indicating that this approach successfully allows the graphene sheets to withstand cyclic tensile strains up to 15%. Lastly, to further enhance the performance of carbon-based stretchable electrodes, an approach was developed which coupled graphene and vertically aligned CNT (VACNT) on a flexible PDMS substrate. Characterization of the graphene-VACNT hybrid shows high electrical conductivity and durability through 50 cycles of loading up to 100% tensile strain. While flexible electronics promise tremendous advances in important technological areas such as healthcare, sensing, energy, and wearable electronics, continued advances in the nanofabrication, nanopatterning, and transfer of carbon nanomaterials such as those pursued here are necessary to fully realize this vision.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9780355096262Subjects--Topical Terms:

557660
Nanotechnology.
Index Terms--Genre/Form:

554714
Electronic books.

Nanofabrication and Nanopatterning of Carbon Nanomaterials for Flexible Electronics.
LDR:03495ntm a2200361Ki 4500 001 908684
005 20180330125240.5
006 m o u
007 cr mn||||a|a||
008 190606s2017 xx obm 000 0 eng d
020 $a 9780355096262
035 $a (MiAaPQ)AAI10273611
035 $a (MiAaPQ)stevens:10391
035 $a AAI10273611
040 $a MiAaPQ $b eng $c MiAaPQ
099 $a TUL $f hyy $c available through World Wide Web
100 1 $a Ding, Junjun. $3 1178935
245 1 0 $a Nanofabrication and Nanopatterning of Carbon Nanomaterials for Flexible Electronics.
264 0 $c 2017
300 $a 1 online resource (138 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 78-12(E), Section: B.
500 $a Advisers: Frank T. Fisher; Eui-Hyeok Yang.
502 $a Thesis (Ph.D.) $c Stevens Institute of Technology $d 2017.
504 $a Includes bibliographical references
520 $a Stretchable electrodes have increasingly drawn attention as a vital component for flexible electronic devices. Carbon nanomaterials such as graphene and carbon nanotubes (CNTs) exhibit properties such as high mechanical flexibility and strength, optical transparency, and electrical conductivity which are naturally required for stretchable electrodes. Graphene growth, nanopatterning, and transfer processes are important steps to use graphene as flexible electrodes. However, advances in the large-area nanofabrication and nanopatterning of carbon nanomaterials such as graphene are necessary to realize the full potential of this technology. In particular, laser interference lithography (LIL), a fast and low cost large-area nanoscale patterning technique, shows tremendous promise for the patterning of graphene and other nanostructures for numerous applications. First, it was demonstrated that large-area nanopatterning and the transfer of chemical vapor deposition (CVD) grown graphene via LIL and plasma etching provide a reliable method to provide large area nanoengineered graphene on various target substrates. Then, to improve the electrode performance under large strain (naturally CVD grown graphene sheet will crack at tensile strains larger than 1%), a corrugated graphene structure on PDMS was designed, fabricated, and tested, with experimental results indicating that this approach successfully allows the graphene sheets to withstand cyclic tensile strains up to 15%. Lastly, to further enhance the performance of carbon-based stretchable electrodes, an approach was developed which coupled graphene and vertically aligned CNT (VACNT) on a flexible PDMS substrate. Characterization of the graphene-VACNT hybrid shows high electrical conductivity and durability through 50 cycles of loading up to 100% tensile strain. While flexible electronics promise tremendous advances in important technological areas such as healthcare, sensing, energy, and wearable electronics, continued advances in the nanofabrication, nanopatterning, and transfer of carbon nanomaterials such as those pursued here are necessary to fully realize this vision.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Nanotechnology. $3 557660
650 4 $a Mechanical engineering. $3 557493
650 4 $a Materials science. $3 557839
655 7 $a Electronic books. $2 local $3 554714
690 $a 0652
690 $a 0548
690 $a 0794
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Stevens Institute of Technology. $b Mechanical Engineer. $3 1178936
773 0 $t Dissertation Abstracts International $g 78-12B(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10273611 $z click for full text (PQDT)