國立虎尾科技大學 |

Investigation of fundamental growth mechanisms in pulsed laser deposition synthesis of nanostructured materials.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Investigation of fundamental growth mechanisms in pulsed laser deposition synthesis of nanostructured materials./
作者:	Mozet, William Thomas.
面頁冊數:	1 online resource (210 pages)
附註:	Source: Dissertation Abstracts International, Volume: 78-07(E), Section: B.
Contained By:	Dissertation Abstracts International78-07B(E).
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9781369606706

Investigation of fundamental growth mechanisms in pulsed laser deposition synthesis of nanostructured materials.
Mozet, William Thomas.

Investigation of fundamental growth mechanisms in pulsed laser deposition synthesis of nanostructured materials. - 1 online resource (210 pages)

Source: Dissertation Abstracts International, Volume: 78-07(E), Section: B.

Thesis (Ph.D.)

Includes bibliographical references

Studies are conducted to better understand growth mechanisms in pulsed laser deposition (PLD) synthesis of nanostructured materials, namely graphene and bismuth telluride (Bi2Te3). For graphene, as the substrate temperature increases, the order of the film increases, from an amorphous carbon film to nanocrystalline graphite and few-layer graphene (FLG). By using a high energy laser, the size and type of ablated species can be controlled to create films with smaller nanocrystalline domains. PLD allows the thickness of the films to be directly controlled by the deposition duration. Films can be grown on arbitrary substrates, unlike other methods which utilize surface chemistry. Substrate morphology also affects the samples, with higher surface roughness leading to larger D/G and 2D/G ratios. Polishing substrates prior to deposition can decrease these ratios by up to 15%. Here, the type of carbon source has little impact on sample growth, except in atmospheric growth of graphene, which may not be an optimal condition because of energy loss of the carbon species. In-situ plasma plume analysis is conducted to analyze the species being ablated from the target. Ablated species consist primarily of C+ ions, with some neutral C and C2 species. Ablated C+ ions are at temperatures as high as 12,000 K in vacuum and 10,000 K in 0.1 torr argon. For bismuth telluride, optimal growth conditions are found for the stoichiometric transfer of Bi2Te3, which can vary from system to system. In general, a deposition temperature of 200°C and a deposition pressure of 0.1 to 1.0 torr argon are required for stoichiometric transfer. Using a high energy laser for ablation leads to smaller grain sizes in the nanostructured films. In addition, using a nitrogen atmosphere instead of argon leads to increased gas-phase condensation prior to deposition, resulting in a highly featured surface. When outside of the ideal pressure range, the substrate material can significantly affect the surface morphology of the sample, ranging from smooth films to nanoparticles and nanorods. These morphologies affect the electrical properties of the material. In general, the lowest electrical resistance came from films grown using 532 nm laser irradiation, which leads to larger grain sizes and more featured surfaces. Films grown at slightly reduced pressure, which leads to more featured surfaces, are also low in electrical resistance. These films also have large Seebeck coefficients, both of which lead to a higher thermoelectric figure of merit.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9781369606706Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Investigation of fundamental growth mechanisms in pulsed laser deposition synthesis of nanostructured materials.
LDR:03935ntm a2200361Ki 4500 001 908705
005 20180330125241.5
006 m o u
007 cr mn||||a|a||
008 190606s2016 xx obm 000 0 eng d
020 $a 9781369606706
035 $a (MiAaPQ)AAI10514939
035 $a (MiAaPQ)rutgersnb:7718
035 $a AAI10514939
040 $a MiAaPQ $b eng $c MiAaPQ
099 $a TUL $f hyy $c available through World Wide Web
100 1 $a Mozet, William Thomas. $3 1178965
245 1 0 $a Investigation of fundamental growth mechanisms in pulsed laser deposition synthesis of nanostructured materials.
264 0 $c 2016
300 $a 1 online resource (210 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 78-07(E), Section: B.
500 $a Adviser: Stephen D. Tse.
502 $a Thesis (Ph.D.) $c Rutgers The State University of New Jersey - New Brunswick $d 2016.
504 $a Includes bibliographical references
520 $a Studies are conducted to better understand growth mechanisms in pulsed laser deposition (PLD) synthesis of nanostructured materials, namely graphene and bismuth telluride (Bi2Te3). For graphene, as the substrate temperature increases, the order of the film increases, from an amorphous carbon film to nanocrystalline graphite and few-layer graphene (FLG). By using a high energy laser, the size and type of ablated species can be controlled to create films with smaller nanocrystalline domains. PLD allows the thickness of the films to be directly controlled by the deposition duration. Films can be grown on arbitrary substrates, unlike other methods which utilize surface chemistry. Substrate morphology also affects the samples, with higher surface roughness leading to larger D/G and 2D/G ratios. Polishing substrates prior to deposition can decrease these ratios by up to 15%. Here, the type of carbon source has little impact on sample growth, except in atmospheric growth of graphene, which may not be an optimal condition because of energy loss of the carbon species. In-situ plasma plume analysis is conducted to analyze the species being ablated from the target. Ablated species consist primarily of C+ ions, with some neutral C and C2 species. Ablated C+ ions are at temperatures as high as 12,000 K in vacuum and 10,000 K in 0.1 torr argon. For bismuth telluride, optimal growth conditions are found for the stoichiometric transfer of Bi2Te3, which can vary from system to system. In general, a deposition temperature of 200°C and a deposition pressure of 0.1 to 1.0 torr argon are required for stoichiometric transfer. Using a high energy laser for ablation leads to smaller grain sizes in the nanostructured films. In addition, using a nitrogen atmosphere instead of argon leads to increased gas-phase condensation prior to deposition, resulting in a highly featured surface. When outside of the ideal pressure range, the substrate material can significantly affect the surface morphology of the sample, ranging from smooth films to nanoparticles and nanorods. These morphologies affect the electrical properties of the material. In general, the lowest electrical resistance came from films grown using 532 nm laser irradiation, which leads to larger grain sizes and more featured surfaces. Films grown at slightly reduced pressure, which leads to more featured surfaces, are also low in electrical resistance. These films also have large Seebeck coefficients, both of which lead to a higher thermoelectric figure of merit.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
650 4 $a Materials science. $3 557839
650 4 $a Nanotechnology. $3 557660
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
690 $a 0794
690 $a 0652
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Rutgers The State University of New Jersey - New Brunswick. $b Graduate School - New Brunswick. $3 845606
773 0 $t Dissertation Abstracts International $g 78-07B(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10514939 $z click for full text (PQDT)