國立虎尾科技大學 |

Quantitative Characterization of Sooting Ethylene Coflow Laminar Diffusion Flames with Optical Diagnostics and Thermophoretic Sampling.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Quantitative Characterization of Sooting Ethylene Coflow Laminar Diffusion Flames with Optical Diagnostics and Thermophoretic Sampling./
作者:	Kempema, Nathan J.
面頁冊數:	1 online resource (236 pages)
附註:	Source: Dissertation Abstracts International, Volume: 78-07(E), Section: B.
Contained By:	Dissertation Abstracts International78-07B(E).
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9781369619539

Quantitative Characterization of Sooting Ethylene Coflow Laminar Diffusion Flames with Optical Diagnostics and Thermophoretic Sampling.
Kempema, Nathan J.

Quantitative Characterization of Sooting Ethylene Coflow Laminar Diffusion Flames with Optical Diagnostics and Thermophoretic Sampling. - 1 online resource (236 pages)

Source: Dissertation Abstracts International, Volume: 78-07(E), Section: B.

Thesis (Ph.D.)

Includes bibliographical references

In this thesis, optical diagnostics and particle sampling techniques were applied in a standardized series of nitrogen-diluted ethylene diffusion flames stabilized on the Yale Coflow Burner. These flames are designed to provide a multi-dimensional and yet computationally tractable environment to study the formation, growth, and oxidation of soot particles. Chemically reacting flows, such as the sooting flames studied in this thesis, are the product of several highly coupled phenomena that includes chemical reaction, fluid dynamics, heat transfer, and mass transport. As such, it can be difficult to directly compare computational results to an experimentally measured parameter given the myriad details that affect the computed parameter. In this thesis, the two-dimensional temperature field of the Yale coflow flames was measured experimentally and used to constrain a numerical simulation by fixing the temperature at each grid point. Thus, the computed temperature field was not driven by heat release from the chemical model, and differences may be observed in species concentration or soot volume fraction. The two- dimensional scalar temperature field of the axisymmetric flames was measured using soot and thin filament pyrometry, Rayleigh structured laser illumination planar imaging, and thermographic phosphor thin filaments. Some of the temperature-time history of soot particles in the flames remains unmeasured and the effect on the constrained numerical solution is discussed.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9781369619539Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Quantitative Characterization of Sooting Ethylene Coflow Laminar Diffusion Flames with Optical Diagnostics and Thermophoretic Sampling.
LDR:04543ntm a2200337Ki 4500 001 908707
005 20180330125241.5
006 m o u
007 cr mn||||a|a||
008 190606s2016 xx obm 000 0 eng d
020 $a 9781369619539
035 $a (MiAaPQ)AAI10583253
035 $a AAI10583253
040 $a MiAaPQ $b eng $c MiAaPQ
099 $a TUL $f hyy $c available through World Wide Web
100 1 $a Kempema, Nathan J. $3 1178967
245 1 0 $a Quantitative Characterization of Sooting Ethylene Coflow Laminar Diffusion Flames with Optical Diagnostics and Thermophoretic Sampling.
264 0 $c 2016
300 $a 1 online resource (236 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 78-07(E), Section: B.
500 $a Adviser: Marshall B. Long.
502 $a Thesis (Ph.D.) $c Yale University $d 2016.
504 $a Includes bibliographical references
520 $a In this thesis, optical diagnostics and particle sampling techniques were applied in a standardized series of nitrogen-diluted ethylene diffusion flames stabilized on the Yale Coflow Burner. These flames are designed to provide a multi-dimensional and yet computationally tractable environment to study the formation, growth, and oxidation of soot particles. Chemically reacting flows, such as the sooting flames studied in this thesis, are the product of several highly coupled phenomena that includes chemical reaction, fluid dynamics, heat transfer, and mass transport. As such, it can be difficult to directly compare computational results to an experimentally measured parameter given the myriad details that affect the computed parameter. In this thesis, the two-dimensional temperature field of the Yale coflow flames was measured experimentally and used to constrain a numerical simulation by fixing the temperature at each grid point. Thus, the computed temperature field was not driven by heat release from the chemical model, and differences may be observed in species concentration or soot volume fraction. The two- dimensional scalar temperature field of the axisymmetric flames was measured using soot and thin filament pyrometry, Rayleigh structured laser illumination planar imaging, and thermographic phosphor thin filaments. Some of the temperature-time history of soot particles in the flames remains unmeasured and the effect on the constrained numerical solution is discussed.
520 $a Modeling the in-flame evolution of soot particles often relies on simplified models of particle morphology or empirical parameters to capture fundamental processes such as particle nucleation. A sectional model of soot morphology is common and approximates particles with a spheroid geometry wherein particles coalesce upon impact. However, this is not consistent with the known morphology of mature soot aggregates, which are comprised of nearly spherical primary particles that connect to form a mass fractal structure. The number of primary particles in these aggregates follows a power law scaling dependence in which surface area is preserved during the agglomeration of two particles (to first order). The aforementioned sectional model incorrectly suggests that particles coalesce upon impact, thereby not preserving surface area (to first order). Therefore, in order to capture surface area dependent processes such as particle oxidation, experimental data must be provided regarding the morphology of soot aggregates in order to assist in the development of an aggregation soot model. In this thesis, the effective radius of gyration of soot aggregates was optically measured in two dimensions for flames stabilized on the Yale burner. The optical measurement was validated through thermophoretic sampling of soot aggregates at targeted locations; information about particle polydispersity and additional morphological parameters was also obtained. An additional study is presented that investigates the optical properties of soot particles in the Yale Coflow Burner. The optical properties were used to validate our knowledge of soot volume fraction and to provide accurate experimental data for comparison to results from numerical models.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Yale University. $3 1178968
773 0 $t Dissertation Abstracts International $g 78-07B(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10583253 $z click for full text (PQDT)