國立虎尾科技大學 |

Improving optical trap measurements with adaptive nonlinear control methods.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	Improving optical trap measurements with adaptive nonlinear control methods./
Author:	Pickel, Jason Gregory.
Description:	1 online resource (276 pages)
Notes:	Source: Dissertation Abstracts International, Volume: 78-08(E), Section: B.
Contained By:	Dissertation Abstracts International78-08B(E).
Subject:	Mechanical engineering. -
Online resource:	click for full text (PQDT)
ISBN:	9781369657937

Improving optical trap measurements with adaptive nonlinear control methods.
Pickel, Jason Gregory.

Improving optical trap measurements with adaptive nonlinear control methods. - 1 online resource (276 pages)

Source: Dissertation Abstracts International, Volume: 78-08(E), Section: B.

Thesis (Ph.D.)

Includes bibliographical references

An optical trap uses radiation pressure of light to manipulate microscopic objects. The interaction between the light and the microscopic objects result in the objects experiencing optical forces. These forces are on the same order of magnitude as biological forces (typically 0:1 to 100 pN) and this feature makes optical traps appropriate for single-molecule studies. Currently, there is a growing need to create an automated optical trap that uses the entire operating range of the optical trap to study the biological forces. Spatial nonlinearities in the optical force and parameter uncertainty complicate feedback control for optical traps. A consequence is that users are spending an enormous amount of time calibrating the instrument and designing a controller, and this diverts their time away from studying the biophysics. This research explores the use of nonlinear and adaptive feedback methods to create an automated optical trap.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9781369657937Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Improving optical trap measurements with adaptive nonlinear control methods.
LDR:03781ntm a2200349Ki 4500 001 908711
005 20180330125241.5
006 m o u
007 cr mn||||a|a||
008 190606s2016 xx obm 000 0 eng d
020 $a 9781369657937
035 $a (MiAaPQ)AAI10586420
035 $a AAI10586420
040 $a MiAaPQ $b eng $c MiAaPQ
099 $a TUL $f hyy $c available through World Wide Web
100 1 $a Pickel, Jason Gregory. $3 1178972
245 1 0 $a Improving optical trap measurements with adaptive nonlinear control methods.
264 0 $c 2016
300 $a 1 online resource (276 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 78-08(E), Section: B.
500 $a Adviser: Daniel G. Cole.
502 $a Thesis (Ph.D.) $c University of Pittsburgh $d 2016.
504 $a Includes bibliographical references
520 $a An optical trap uses radiation pressure of light to manipulate microscopic objects. The interaction between the light and the microscopic objects result in the objects experiencing optical forces. These forces are on the same order of magnitude as biological forces (typically 0:1 to 100 pN) and this feature makes optical traps appropriate for single-molecule studies. Currently, there is a growing need to create an automated optical trap that uses the entire operating range of the optical trap to study the biological forces. Spatial nonlinearities in the optical force and parameter uncertainty complicate feedback control for optical traps. A consequence is that users are spending an enormous amount of time calibrating the instrument and designing a controller, and this diverts their time away from studying the biophysics. This research explores the use of nonlinear and adaptive feedback methods to create an automated optical trap.
520 $a A model is defined to describe the coupling between the dynamics of the optical trap and molecule, and the nominal force within the molecule is treated as a disturbance. The disturbance information is obtained by creating a disturbance model and combining its dynamics with the system dynamics. The system nonlinearities are addressed by using a nonlinear Kalman filter to estimate the system state, then the system state is used in a input-output feedback linearization and linear quadratic structure to satisfy performance requirements. Statistical analyses are performed to assess the effectiveness the feedback methods have on the open-loop and closed-loop systems. Its performance is compared with that of linear integral control used in practice to quantify the performance improvement when considering the system nonlinearities in the control design. The system nonlinearities and parameter uncertainty are addressed by using adaptive and nonlinear feedback methods. An adaptive state observer provides a simultaneous estimate of the system state and parameters, then these estimated entities are used in an adaptive input-output feedback linearization and LQ structure. The result is the creation of an automated self-tuning optical trap that minimizes the user interaction with the instrument calibration and control design, uses the entire operating range of the optical trap, and obtains an unbiased estimate of the molecule force. The closed-loop performance of these feedback methods are demonstrated by replicating the force-extension curve of a DNA molecule.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
650 4 $a Biophysics. $3 581576
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
690 $a 0786
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a University of Pittsburgh. $3 1178873
773 0 $t Dissertation Abstracts International $g 78-08B(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10586420 $z click for full text (PQDT)