國立虎尾科技大學 |

Fabrication of Polylactide Nanocomposite Filament Using Melt Extrusion and Filament Characterization for 3D Printing.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Fabrication of Polylactide Nanocomposite Filament Using Melt Extrusion and Filament Characterization for 3D Printing./
作者:	Jain, Shrenik Kumar.
面頁冊數:	1 online resource (70 pages)
附註:	Source: Masters Abstracts International, Volume: 57-01.
Contained By:	Masters Abstracts International57-01(E).
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9780355393118

Fabrication of Polylactide Nanocomposite Filament Using Melt Extrusion and Filament Characterization for 3D Printing.
Jain, Shrenik Kumar.

Fabrication of Polylactide Nanocomposite Filament Using Melt Extrusion and Filament Characterization for 3D Printing. - 1 online resource (70 pages)

Source: Masters Abstracts International, Volume: 57-01.

Thesis (M.S.)

Includes bibliographical references

Fused deposition modeling (FDM) technology uses thermoplastic filament for layer by layer fabrication of objects. To make functional objects with desired properties, composite filaments are required in the FDM. In this thesis, less expensive mesoporous Nano carbon (NC) and carbon nanotube (CNT) infused in Polylactide (PLA) thermoplastic filaments were fabricated to improve the electrical properties and maintain sufficient strength for 3D printing. Solution blending was used for nanocomposite fabrication and melt extrusion was employed to make cylindrical filaments. Mechanical and electrical properties of 1 to 20 wt% of NC and 1 to 3 wt% of CNT filaments were investigated and significant improvement of conductivity (3.76 S/m) and sufficient yield strength (35MPa) were obtained. Scanning electron microscopy (SEM) images exhibited uniform dispersion of nanoparticles in polymer matrix and differential scanning calorimetry (DSC) results showed no significant changes in the glass transition temperature (Tg) for all the compositions. Perspective uses of this filament are for fabrication of electrical wires in 3D printed robots, drones, prosthetics, orthotics and others.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9780355393118Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Fabrication of Polylactide Nanocomposite Filament Using Melt Extrusion and Filament Characterization for 3D Printing.
LDR:02493ntm a2200349Ki 4500 001 908759
005 20180330125242.5
006 m o u
007 cr mn||||a|a||
008 190606s2017 xx obm 000 0 eng d
020 $a 9780355393118
035 $a (MiAaPQ)AAI10675295
035 $a (MiAaPQ)0382vireo:166Jain
035 $a AAI10675295
040 $a MiAaPQ $b eng $c MiAaPQ
099 $a TUL $f hyy $c available through World Wide Web
100 1 $a Jain, Shrenik Kumar. $3 1179034
245 1 0 $a Fabrication of Polylactide Nanocomposite Filament Using Melt Extrusion and Filament Characterization for 3D Printing.
264 0 $c 2017
300 $a 1 online resource (70 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 57-01.
500 $a Adviser: Yonas Tadesse,.
502 $a Thesis (M.S.) $c The University of Texas at Dallas $d 2017.
504 $a Includes bibliographical references
520 $a Fused deposition modeling (FDM) technology uses thermoplastic filament for layer by layer fabrication of objects. To make functional objects with desired properties, composite filaments are required in the FDM. In this thesis, less expensive mesoporous Nano carbon (NC) and carbon nanotube (CNT) infused in Polylactide (PLA) thermoplastic filaments were fabricated to improve the electrical properties and maintain sufficient strength for 3D printing. Solution blending was used for nanocomposite fabrication and melt extrusion was employed to make cylindrical filaments. Mechanical and electrical properties of 1 to 20 wt% of NC and 1 to 3 wt% of CNT filaments were investigated and significant improvement of conductivity (3.76 S/m) and sufficient yield strength (35MPa) were obtained. Scanning electron microscopy (SEM) images exhibited uniform dispersion of nanoparticles in polymer matrix and differential scanning calorimetry (DSC) results showed no significant changes in the glass transition temperature (Tg) for all the compositions. Perspective uses of this filament are for fabrication of electrical wires in 3D printed robots, drones, prosthetics, orthotics and others.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
650 4 $a Materials science. $3 557839
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
690 $a 0794
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a The University of Texas at Dallas. $b Mechanical Engineering. $3 1179035
773 0 $t Masters Abstracts International $g 57-01(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10675295 $z click for full text (PQDT)