國立虎尾科技大學 |

Fabrication and Assembly of One-Dimensional Semiconductor Nanostructures and Their Application to Multi-Functional Devices.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Fabrication and Assembly of One-Dimensional Semiconductor Nanostructures and Their Application to Multi-Functional Devices./
作者:	Zhang, Yaozhong.
面頁冊數:	1 online resource (235 pages)
附註:	Source: Dissertation Abstracts International, Volume: 79-03(E), Section: B.
Contained By:	Dissertation Abstracts International79-03B(E).
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9780355511475

Fabrication and Assembly of One-Dimensional Semiconductor Nanostructures and Their Application to Multi-Functional Devices.
Zhang, Yaozhong.

Fabrication and Assembly of One-Dimensional Semiconductor Nanostructures and Their Application to Multi-Functional Devices. - 1 online resource (235 pages)

Source: Dissertation Abstracts International, Volume: 79-03(E), Section: B.

Thesis (Ph.D.)

Includes bibliographical references

One-dimensional (1D) semiconducting nanostructures have been extensively studied in the past few decades due to their excellent electrical, chemical and optical properties, which enable remarkable performance in various applications such as electronic/optoelectronic devices, chemical/biological sensors and energy harvesting. Since water pollution becomes as one of the most challenging global issues, photocatalytic degradation has received considerable attentions as an efficient water treatment technology with regard to removing organic contaminants. Upon receiving UV or sunlight irradiation with energy higher than their bandgap, semiconducting materials generate charge carriers such as electrons and holes that react with water and produce reactive species for decomposition. TiO2 and ZnO are the most widely used photocatalysts because of their higher degradability and lower production cost. Especially, TiO2 and ZnO nanostructures exhibit better degradability thanks to their low recombination of charge carriers and large active surface areas. However, the challenges like low utilization of sunlight (mainly responsive to UV light) and non-recyclability limit their large-scale use as photocatalysts. In this work, we tackle these limitations by developing a new immobilized photocatalytic system to improve their recyclability and investigating a novel semiconductor-semiconductor heterogeneous material to enhance their optical response in the visible region. First, ZnO nanowires (NWs) have been synthesized using a hydrothermal process and hybridized with silicon nanocrystals (SiNCs). This heterojunction lowers the ZnO bandgap (more active under visible light) and exhibits superior photodegradation performance under the visible and white light conditions compared to original ZnO NW photocatalysts. Second, we have developed a novel fabrication technique to create a vertically-aligned ZnO NW array on a polymer substrate with strong adhesion. The proposed two-step fabrication process allows the part of NWs to be embedded into the polymer matrix, securing the nanomaterials for harsh operating environments. A ZnO-NW/Polydimethylsiloxane (PDMS) film presents the unique immobilized photocatalytic system that can float on the water surface, targeting buoyant pollutants. In particular, crude oil has been used a model pollutant for degradation experiment. A strong adhesion of ZnO NWs to the polymer substrate also enables two new implementations of the photocatalytic system including the application with high shear stresses and piezoelectrocalysis. The latter application is particularly interesting as organic pollutants were degraded via mechanical vibration without resorting to light energy. Finally, this two-step synthesis technique combined with strain engineering allows us to create multifunctional soft micromotors, i.e., the ZnO-NWs/PDMS submillimeter 3D structures integrated with various nanomaterials (metal nanoparticle catalysts, magnetic nanoparticles, etc.). The micromotors possess multiple functionalities such as photocatalysis, piezoelectrocatalysis, locomotion/self-propulsion, and magnetic response. This level of multifunctionality integration on a single platform can be rarely found in the literature. In the end, an immobilized photocatalytic system with high surface areas, improved mass transfer, and easy recyclability has been developed, which can find its uses in biomedical and environmental applications. Apart from the photocatalytic applications, the research has also been oriented to address some technical challenges in deterministic assembly of the solution-processed 1D nanostructures for device integration.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9780355511475Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Fabrication and Assembly of One-Dimensional Semiconductor Nanostructures and Their Application to Multi-Functional Devices.
LDR:04990ntm a2200337Ki 4500 001 908764
005 20180330125242.5
006 m o u
007 cr mn||||a|a||
008 190606s2017 xx obm 000 0 eng d
020 $a 9780355511475
035 $a (MiAaPQ)AAI10686176
035 $a (MiAaPQ)grad.msu:15758
035 $a AAI10686176
040 $a MiAaPQ $b eng $c MiAaPQ
099 $a TUL $f hyy $c available through World Wide Web
100 1 $a Zhang, Yaozhong. $3 1179040
245 1 0 $a Fabrication and Assembly of One-Dimensional Semiconductor Nanostructures and Their Application to Multi-Functional Devices.
264 0 $c 2017
300 $a 1 online resource (235 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 79-03(E), Section: B.
500 $a Adviser: Junghoon Yeom.
502 $a Thesis (Ph.D.) $c Michigan State University $d 2017.
504 $a Includes bibliographical references
520 $a One-dimensional (1D) semiconducting nanostructures have been extensively studied in the past few decades due to their excellent electrical, chemical and optical properties, which enable remarkable performance in various applications such as electronic/optoelectronic devices, chemical/biological sensors and energy harvesting. Since water pollution becomes as one of the most challenging global issues, photocatalytic degradation has received considerable attentions as an efficient water treatment technology with regard to removing organic contaminants. Upon receiving UV or sunlight irradiation with energy higher than their bandgap, semiconducting materials generate charge carriers such as electrons and holes that react with water and produce reactive species for decomposition. TiO2 and ZnO are the most widely used photocatalysts because of their higher degradability and lower production cost. Especially, TiO2 and ZnO nanostructures exhibit better degradability thanks to their low recombination of charge carriers and large active surface areas. However, the challenges like low utilization of sunlight (mainly responsive to UV light) and non-recyclability limit their large-scale use as photocatalysts. In this work, we tackle these limitations by developing a new immobilized photocatalytic system to improve their recyclability and investigating a novel semiconductor-semiconductor heterogeneous material to enhance their optical response in the visible region. First, ZnO nanowires (NWs) have been synthesized using a hydrothermal process and hybridized with silicon nanocrystals (SiNCs). This heterojunction lowers the ZnO bandgap (more active under visible light) and exhibits superior photodegradation performance under the visible and white light conditions compared to original ZnO NW photocatalysts. Second, we have developed a novel fabrication technique to create a vertically-aligned ZnO NW array on a polymer substrate with strong adhesion. The proposed two-step fabrication process allows the part of NWs to be embedded into the polymer matrix, securing the nanomaterials for harsh operating environments. A ZnO-NW/Polydimethylsiloxane (PDMS) film presents the unique immobilized photocatalytic system that can float on the water surface, targeting buoyant pollutants. In particular, crude oil has been used a model pollutant for degradation experiment. A strong adhesion of ZnO NWs to the polymer substrate also enables two new implementations of the photocatalytic system including the application with high shear stresses and piezoelectrocalysis. The latter application is particularly interesting as organic pollutants were degraded via mechanical vibration without resorting to light energy. Finally, this two-step synthesis technique combined with strain engineering allows us to create multifunctional soft micromotors, i.e., the ZnO-NWs/PDMS submillimeter 3D structures integrated with various nanomaterials (metal nanoparticle catalysts, magnetic nanoparticles, etc.). The micromotors possess multiple functionalities such as photocatalysis, piezoelectrocatalysis, locomotion/self-propulsion, and magnetic response. This level of multifunctionality integration on a single platform can be rarely found in the literature. In the end, an immobilized photocatalytic system with high surface areas, improved mass transfer, and easy recyclability has been developed, which can find its uses in biomedical and environmental applications. Apart from the photocatalytic applications, the research has also been oriented to address some technical challenges in deterministic assembly of the solution-processed 1D nanostructures for device integration.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Michigan State University. $b Mechanical Engineering. $3 845689
773 0 $t Dissertation Abstracts International $g 79-03B(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10686176 $z click for full text (PQDT)