國立虎尾科技大學 |

Vacuum Infusion Molding of Natural Fibre Reinforced Biobased Resin Composite.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Vacuum Infusion Molding of Natural Fibre Reinforced Biobased Resin Composite./
作者:	Subbiah, Rajkumar.
面頁冊數:	1 online resource (154 pages)
附註:	Source: Dissertation Abstracts International, Volume: 77-08(E), Section: B.
Contained By:	Dissertation Abstracts International77-08B(E).
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9781339554594

Vacuum Infusion Molding of Natural Fibre Reinforced Biobased Resin Composite.
Subbiah, Rajkumar.

Vacuum Infusion Molding of Natural Fibre Reinforced Biobased Resin Composite. - 1 online resource (154 pages)

Source: Dissertation Abstracts International, Volume: 77-08(E), Section: B.

Thesis (Ph.D.)

Includes bibliographical references

The increasing demand in the field of bio material research for an in-depth understanding of processing phenomenon to convert it into a useful product is essential. Besides, there is inadequate information regarding the dependency between their processing mechanism and mechanical performance. The main focus of this work is to address the issues of the resin flow behavior of natural fibre in vacuum infusion molding, the determination of permeability and validation of the proposed contact angle model with experimental data. The proposed model shows greater accuracy when validated with experimental observation. The outcome of this research emphasizes the wetting mechanism and fibre network of sisal mats are the major factors that reduces 26% of permeability as compared to glass fibres. In addition, it is observed that the swelling phenomenon had a minimal influence on the permeability of the sisal fibre mat.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9781339554594Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Vacuum Infusion Molding of Natural Fibre Reinforced Biobased Resin Composite.
LDR:03952ntm a2200385Ki 4500 001 909398
005 20180426100010.5
006 m o u
007 cr mn||||a|a||
008 190606s2016 xx obm 000 0 eng d
020 $a 9781339554594
035 $a (MiAaPQ)AAI10044006
035 $a (MiAaPQ)toronto:13543
035 $a AAI10044006
040 $a MiAaPQ $b eng $c MiAaPQ
099 $a TUL $f hyy $c available through World Wide Web
100 1 $a Subbiah, Rajkumar. $3 1180171
245 1 0 $a Vacuum Infusion Molding of Natural Fibre Reinforced Biobased Resin Composite.
264 0 $c 2016
300 $a 1 online resource (154 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 77-08(E), Section: B.
500 $a Advisers: Mohini M. Sain; Sanjay K. Nayak.
502 $a Thesis (Ph.D.) $c University of Toronto (Canada) $d 2016.
504 $a Includes bibliographical references
520 $a The increasing demand in the field of bio material research for an in-depth understanding of processing phenomenon to convert it into a useful product is essential. Besides, there is inadequate information regarding the dependency between their processing mechanism and mechanical performance. The main focus of this work is to address the issues of the resin flow behavior of natural fibre in vacuum infusion molding, the determination of permeability and validation of the proposed contact angle model with experimental data. The proposed model shows greater accuracy when validated with experimental observation. The outcome of this research emphasizes the wetting mechanism and fibre network of sisal mats are the major factors that reduces 26% of permeability as compared to glass fibres. In addition, it is observed that the swelling phenomenon had a minimal influence on the permeability of the sisal fibre mat.
520 $a The complex phenomena occurring during wetting of natural fibres with epoxidized soybean oil (ESO) in terms of contact angle and surface energy are investigated. The fibres are treated with various reagents to improve the wetting behavior. It is noted that NaOH treatment provides considerable amount of increase in surface area of the exposed cellulose that aids in enhancement of wettability characteristics by increasing the surface energy from 18 mN/m to 23.5 mN/m while reducing the contact angle from 530 to 310. Conversely, there is a formation of virtual layer on the fibre when treated with silane and isocyanate. Moreover, isocyanate treated fibre exhibits improved wetting behaviour in terms of increase in surface energy from 18 mN/m to 25.5 mN/m when wetted with ESO.
520 $a The kinetics study of the curing reaction of the resin is performed by differential scanning calorimetry. A new empirical model is proposed to analyze the kinetic data obtained experimentally. The results highlighted that the proposed model attained significant improvement to predict the experimental cure kinetic data qualitatively and quantitatively. The addition of 30% ESO in the conventional system increases the activation energy of the system up to 108 kJ/mol. The effect of the surface treatments of natural fibre, fibre loading direction, and resin flow direction on the tensile properties of developed composites are investigated. The longitudinal tensile strength of developed composites demonstrated a 7-8 fold increment, as compared to the transverse direction tensile strength. The flow along the fibre provides 10% increment in tensile strength due to higher permeability.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
650 4 $a Engineering. $3 561152
650 4 $a Plastics. $3 563477
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
690 $a 0537
690 $a 0795
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a University of Toronto (Canada). $b Forestry. $3 1180172
773 0 $t Dissertation Abstracts International $g 77-08B(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10044006 $z click for full text (PQDT)