國立虎尾科技大學 |

Aerodynamic shape optimization by multi-fidelity modeling and manifold mapping.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Aerodynamic shape optimization by multi-fidelity modeling and manifold mapping./
作者:	Ren, Jie.
面頁冊數:	1 online resource (84 pages)
附註:	Source: Masters Abstracts International, Volume: 55-05.
Contained By:	Masters Abstracts International55-05(E).
標題:	Aerospace engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9781339845937

Aerodynamic shape optimization by multi-fidelity modeling and manifold mapping.
Ren, Jie.

Aerodynamic shape optimization by multi-fidelity modeling and manifold mapping. - 1 online resource (84 pages)

Source: Masters Abstracts International, Volume: 55-05.

Thesis (M.S.)

Includes bibliographical references

Aerodynamic shape optimization (ASO) is important in contemporary engineering design of complex systems such as aircraft and wind turbines. The use of high-fidelity partial differential equation (PDE) simulations within the design process is becoming the standard. However, the overall computation cost of the ASO problem can be very high when considering the following key challenges: (1) time-consuming PDE simulations, (2) large number of design variables, and (3) conventional optimization require many system evaluations. Combined these form an optimization problem which may be prohibitive to solve, even when using high performance computing (HPC) systems. In this work, a computationally efficient optimization algorithm for aerodynamic design is presented. In our approach, direct optimization of a computationally expensive model is replaced by an iterative updating and re-optimization of a fast physics-based replacement model, following the surrogate-based optimization paradigm. The surrogate is constructed using a low-fidelity model which is corrected using manifold mapping (MM) to become a reliable representation of the high-fidelity one during the optimization process. Only one high-fidelity PDE simulation is required per design iteration. The version of MM utilized here does not require gradient information. The proposed method is validated and characterized by applying it to several benchmark ASO problems, including lift-constrained airfoil drag minimization in inviscid and viscous transonic flows, and comparing the results with state of the art techniques. MM yielded optimized shapes, with 8 B-spline design variables, that are comparable to the shapes obtained by direct optimization algorithms equipped with adjoint sensitivities and trust regions. In the inviscid benchmark case, MM needed less than 150 equivalent high-fidelity model evaluations (only flow solutions), or approximately 460 minutes on a HPC with 32 processors, whereas the direct algorithm needed 391 high-fidelity model evaluations (flow and adjoint), or approximately 4,494 minutes on the same HPC. In other words, the MM algorithm was an order of magnitude faster than the gradient-based search with adjoint sensitivities in this case. For the viscous case, MM yields an optimized shape using less than 300 equivalent high-fidelity evaluations, taking approximately 80 hours on the HPC. In this case, the direct algorithm was not able to reach a comparably efficient shape. MM is able to handle vector-valued design problems efficiently. This was demonstrated on a multipoint design problem as well as on an inverse design problem. The multipoint design showed that the optimized airfoil outperformed that original airfoil in terms of flight conditions and robustness in multiple cruise conditions. In the inverse design case, MM needed an order of magnitude less equivalent high-fidelity model evaluations than a derivative-free algorithm.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9781339845937Subjects--Topical Terms:

686400
Aerospace engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Aerodynamic shape optimization by multi-fidelity modeling and manifold mapping.
LDR:04182ntm a2200337Ki 4500 001 909415
005 20180426100010.5
006 m o u
007 cr mn||||a|a||
008 190606s2016 xx obm 000 0 eng d
020 $a 9781339845937
035 $a (MiAaPQ)AAI10126553
035 $a (MiAaPQ)iastate:15673
035 $a AAI10126553
040 $a MiAaPQ $b eng $c MiAaPQ
099 $a TUL $f hyy $c available through World Wide Web
100 1 $a Ren, Jie. $3 796070
245 1 0 $a Aerodynamic shape optimization by multi-fidelity modeling and manifold mapping.
264 0 $c 2016
300 $a 1 online resource (84 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 55-05.
500 $a Adviser: Leifur Leisson.
502 $a Thesis (M.S.) $c Iowa State University $d 2016.
504 $a Includes bibliographical references
520 $a Aerodynamic shape optimization (ASO) is important in contemporary engineering design of complex systems such as aircraft and wind turbines. The use of high-fidelity partial differential equation (PDE) simulations within the design process is becoming the standard. However, the overall computation cost of the ASO problem can be very high when considering the following key challenges: (1) time-consuming PDE simulations, (2) large number of design variables, and (3) conventional optimization require many system evaluations. Combined these form an optimization problem which may be prohibitive to solve, even when using high performance computing (HPC) systems. In this work, a computationally efficient optimization algorithm for aerodynamic design is presented. In our approach, direct optimization of a computationally expensive model is replaced by an iterative updating and re-optimization of a fast physics-based replacement model, following the surrogate-based optimization paradigm. The surrogate is constructed using a low-fidelity model which is corrected using manifold mapping (MM) to become a reliable representation of the high-fidelity one during the optimization process. Only one high-fidelity PDE simulation is required per design iteration. The version of MM utilized here does not require gradient information. The proposed method is validated and characterized by applying it to several benchmark ASO problems, including lift-constrained airfoil drag minimization in inviscid and viscous transonic flows, and comparing the results with state of the art techniques. MM yielded optimized shapes, with 8 B-spline design variables, that are comparable to the shapes obtained by direct optimization algorithms equipped with adjoint sensitivities and trust regions. In the inviscid benchmark case, MM needed less than 150 equivalent high-fidelity model evaluations (only flow solutions), or approximately 460 minutes on a HPC with 32 processors, whereas the direct algorithm needed 391 high-fidelity model evaluations (flow and adjoint), or approximately 4,494 minutes on the same HPC. In other words, the MM algorithm was an order of magnitude faster than the gradient-based search with adjoint sensitivities in this case. For the viscous case, MM yields an optimized shape using less than 300 equivalent high-fidelity evaluations, taking approximately 80 hours on the HPC. In this case, the direct algorithm was not able to reach a comparably efficient shape. MM is able to handle vector-valued design problems efficiently. This was demonstrated on a multipoint design problem as well as on an inverse design problem. The multipoint design showed that the optimized airfoil outperformed that original airfoil in terms of flight conditions and robustness in multiple cruise conditions. In the inverse design case, MM needed an order of magnitude less equivalent high-fidelity model evaluations than a derivative-free algorithm.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Aerospace engineering. $3 686400
655 7 $a Electronic books. $2 local $3 554714
690 $a 0538
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Iowa State University. $b Aerospace Engineering. $3 1179169
773 0 $t Masters Abstracts International $g 55-05(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10126553 $z click for full text (PQDT)