國立虎尾科技大學 |

Numerical modeling of soy biodiesel to maximize engine power and efficiency while minimizing pollutant emissions.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Numerical modeling of soy biodiesel to maximize engine power and efficiency while minimizing pollutant emissions./
作者:	Tootoonchi, Ehsan.
面頁冊數:	1 online resource (96 pages)
附註:	Source: Dissertation Abstracts International, Volume: 77-12(E), Section: B.
Contained By:	Dissertation Abstracts International77-12B(E).
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9781339989648

Numerical modeling of soy biodiesel to maximize engine power and efficiency while minimizing pollutant emissions.
Tootoonchi, Ehsan.

Numerical modeling of soy biodiesel to maximize engine power and efficiency while minimizing pollutant emissions. - 1 online resource (96 pages)

Source: Dissertation Abstracts International, Volume: 77-12(E), Section: B.

Thesis (Ph.D.)

Includes bibliographical references

Biodiesel is a renewable fuel that can help to reduce dependence on foreign petroleum and to help control the negative environmental effects of combustion engines. This work develops a numerical model for soy biodiesel combustion in diesel engine applications.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9781339989648Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Numerical modeling of soy biodiesel to maximize engine power and efficiency while minimizing pollutant emissions.
LDR:03752ntm a2200361Ki 4500 001 909427
005 20180426100011.5
006 m o u
007 cr mn||||a|a||
008 190606s2016 xx obm 000 0 eng d
020 $a 9781339989648
035 $a (MiAaPQ)AAI10143770
035 $a AAI10143770
040 $a MiAaPQ $b eng $c MiAaPQ
099 $a TUL $f hyy $c available through World Wide Web
100 1 $a Tootoonchi, Ehsan. $3 1180215
245 1 0 $a Numerical modeling of soy biodiesel to maximize engine power and efficiency while minimizing pollutant emissions.
264 0 $c 2016
300 $a 1 online resource (96 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 77-12(E), Section: B.
500 $a Adviser: Gerald J. Micklow.
502 $a Thesis (Ph.D.) $c Florida Institute of Technology $d 2016.
504 $a Includes bibliographical references
520 $a Biodiesel is a renewable fuel that can help to reduce dependence on foreign petroleum and to help control the negative environmental effects of combustion engines. This work develops a numerical model for soy biodiesel combustion in diesel engine applications.
520 $a A comprehensive breakup model for diesel and biodiesel combustion calculations using the KIVA3V is presented. The primary breakup model calculates the outcome of the initial breakup stage using flow conditions, nozzle geometry, and liquid fuel characteristics, and assigns the Sauter Mean Radius (SMR) values to injecting droplets. The Kelvin-Helmholtz/Rayleigh-Taylor(KH-RT) model acts as the secondary model to break up injected particles. Good agreement between simulation and the experimental results was found for both diesel and soy biodiesel fuels. The model was capable of accurately predicting liquid length, spray angle, and steady liquid penetration.The results showed that the Taylor Analogy Breakup (TAB) model under predicts the spray behavior, while deactivating the secondary breakup model tends to over predict these behaviors.
520 $a Soy biodiesel fuel property estimation techniques were validated indirectly using experimental spray data and one set of fuel property models capable of predicting accurate liquid length for soy biodiesel was presented.Results revealed a significant difference in estimation techniques, with the highest discrepancy found in enthalpy calculation techniques. The results also showed that a higher average fuel particle temperature will result in smaller spray. Almost all the cases tend to over estimate the liquid length with some extreme cases predicting wall impingement.
520 $a A computationally efficient, two step reaction, pre-calculated chemical kinetic model for soy biodiesel combustion, capable of predicting both power and NOchi emission in diesel engine configuration was proposed. The results showed that the model is capable of accurately predicting ignition delay, maximum cylinder pressure, and NOchi emissions. Two single step global kinetic reactions were investigated and compared against experimental data. Both models under predict ignition delay, maximum cylinder pressure, and NOchichi emission. The two step mechanism model was utilized in a soy biodiesel injection timing optimization study. Start of injection (SOI) of 2 degrees before top dead center (BTDC) was reported as the optimized injection timing.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Florida Institute of Technology. $3 1180216
773 0 $t Dissertation Abstracts International $g 77-12B(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10143770 $z click for full text (PQDT)