國立虎尾科技大學 |

Local optical phase detection probes with an application to a high speed boundary layer.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Local optical phase detection probes with an application to a high speed boundary layer./
作者:	Perret, Matias Nicholas.
面頁冊數:	1 online resource (149 pages)
附註:	Source: Dissertation Abstracts International, Volume: 78-05(E), Section: B.
Contained By:	Dissertation Abstracts International78-05B(E).
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9781369304336

Local optical phase detection probes with an application to a high speed boundary layer.
Perret, Matias Nicholas.

Local optical phase detection probes with an application to a high speed boundary layer. - 1 online resource (149 pages)

Source: Dissertation Abstracts International, Volume: 78-05(E), Section: B.

Thesis (Ph.D.)

Includes bibliographical references

This thesis presents the continued development of micro optical phase detection instrumentation capable of measuring void fraction, interfacial area density, interfacial velocity and bubble sizes and their application to measurements in a high speed boundary layer. The instrumentation consists of micro sized sapphire tipped probes tailored to measure in the two-phase flow of air bubbles in water. Probe tips with geometries intended to maximize field life while minimizing intrusiveness were designed, fabricated and characterized. The characterization revealed that the active region of a probe tip can go beyond the highly sensitive 45 degree tip. Controlling the active length of the tips can be achieved through a combination of taper angles and 45 degree tip size, with larger tips having shorter active lengths.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9781369304336Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Local optical phase detection probes with an application to a high speed boundary layer.
LDR:03266ntm a2200349Ki 4500 001 909533
005 20180426100013.5
006 m o u
007 cr mn||||a|a||
008 190606s2016 xx obm 000 0 eng d
020 $a 9781369304336
035 $a (MiAaPQ)AAI10181907
035 $a (MiAaPQ)uiowa:14696
035 $a AAI10181907
040 $a MiAaPQ $b eng $c MiAaPQ
099 $a TUL $f hyy $c available through World Wide Web
100 1 $a Perret, Matias Nicholas. $3 1180359
245 1 0 $a Local optical phase detection probes with an application to a high speed boundary layer.
264 0 $c 2016
300 $a 1 online resource (149 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 78-05(E), Section: B.
500 $a Adviser: Pablo M. Carrica.
502 $a Thesis (Ph.D.) $c The University of Iowa $d 2016.
504 $a Includes bibliographical references
520 $a This thesis presents the continued development of micro optical phase detection instrumentation capable of measuring void fraction, interfacial area density, interfacial velocity and bubble sizes and their application to measurements in a high speed boundary layer. The instrumentation consists of micro sized sapphire tipped probes tailored to measure in the two-phase flow of air bubbles in water. Probe tips with geometries intended to maximize field life while minimizing intrusiveness were designed, fabricated and characterized. The characterization revealed that the active region of a probe tip can go beyond the highly sensitive 45 degree tip. Controlling the active length of the tips can be achieved through a combination of taper angles and 45 degree tip size, with larger tips having shorter active lengths.
520 $a The full scale bubbly flow measurements were performed on a 6 m flat bottom survey boat. The aforementioned quantities were measured on bubbles naturally entrained at the bow of the boat. Probes were positioned at the bow of the boat, near the entrainment region and at the stern where the bubbles exit after having interacted with the high shear turbulent boundary layer. Experiments were conducted in fresh water, at the Coralville Lake, IA, and salt water, at the St. Andrews Bay and Gulf Coast near Panama City, FL. The results indicate that the bubbles interact significantly with the boundary layer. At low speeds, in fresh water, bubble accumulation and coalescence is evident by the presence of large bubbles at the stern. At high speeds, in both fresh and salt water, bubble breakup dominates and very small bubbles are produced near the hull of the boat. It was observed that salt water inhibits coalescence, even at low boat speeds. Void fraction was seen to increase with boat speeds above 10 knots and peaks near the wall. Bubble velocities show slip with the wall at all speeds and exhibit large RMS fluctuations, increasing near the wall.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a The University of Iowa. $b Mechanical Engineering. $3 845658
773 0 $t Dissertation Abstracts International $g 78-05B(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10181907 $z click for full text (PQDT)