國立虎尾科技大學 |

Development of a New Stretchable and Screen Printable Conductive Ink.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Development of a New Stretchable and Screen Printable Conductive Ink./
作者:	Mohammed, Anwar A.
面頁冊數:	1 online resource (138 pages)
附註:	Source: Dissertation Abstracts International, Volume: 78-11(E), Section: B.
Contained By:	Dissertation Abstracts International78-11B(E).
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9780355060768

Development of a New Stretchable and Screen Printable Conductive Ink.
Mohammed, Anwar A.

Development of a New Stretchable and Screen Printable Conductive Ink. - 1 online resource (138 pages)

Source: Dissertation Abstracts International, Volume: 78-11(E), Section: B.

Thesis (Ph.D.)

Includes bibliographical references

Stretchable conductive ink is a key enabler for stretchable electronics. This thesis research focuses on the development of a new stretchable and screen printable conductive ink. After print and cure, this ink would be capable of being stretched by at least 500 cycles at 20% strain without increasing its resistance by more than 30 times the original resistance, while maintaining electrical and mechanical integrity. For a stretchable and screen-printable conductive ink, the correct morphology of the metal powder selected and the ability of the binder to be stretched after the sintering process, are both indispensable. This research has shown that a bi-modal mixture of fine and large-diameter silver flakes will improve stretchability. While the smaller flakes increase the conductivity and lower the sintering temperature, the larger flake particles promote ohmic connectivity during stretching. The bi-modal flake distribution increases connection points while enhancing packing density and lowering the thermal activation barrier. The polymer binder phase plays a crucial role in offering stretchability to the stretchable conductive inks. The silver flakes by themselves are not stretchable but they are contained within a stretchable binder system. The research demonstrates that commonly used printable ink binder when combined with large-chain polymers through a process known as 'elastomeric chain polymerization' will enable the conductive ink to become more stretchable. This research has shown that the new stretchable and screen printable silver conductive ink developed based upon the two insights mentioned above; (1) bi modal flakes to improve ohmic connectivity during stretching and (2) elastomeric chain polymerized binder system which could stretch even after the ink is sintered to the substrate, can exhibit an ink stretchability of at least 500 cycles at 20% strain while increasing the resistance by less than 30 times the original resistance. Wavy print patterns can enhance the stretchability of stretchable conductors. The research also demonstrates that FEA modeling, simulating the total principal strain on the printed patterns, can be used to estimate the comparative resistance changes caused by stretching and these changes can be explained by some basic equations from Percolation Theory.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9780355060768Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Development of a New Stretchable and Screen Printable Conductive Ink.
LDR:03614ntm a2200349Ki 4500 001 911181
005 20180529081858.5
006 m o u
007 cr mn||||a|a||
008 190606s2017 xx obm 000 0 eng d
020 $a 9780355060768
035 $a (MiAaPQ)AAI10255108
035 $a (MiAaPQ)umd:17816
035 $a AAI10255108
040 $a MiAaPQ $b eng $c MiAaPQ
099 $a TUL $f hyy $c available through World Wide Web
100 1 $a Mohammed, Anwar A. $3 1182859
245 1 0 $a Development of a New Stretchable and Screen Printable Conductive Ink.
264 0 $c 2017
300 $a 1 online resource (138 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 78-11(E), Section: B.
500 $a Adviser: Michael Pecht.
502 $a Thesis (Ph.D.) $c University of Maryland, College Park $d 2017.
504 $a Includes bibliographical references
520 $a Stretchable conductive ink is a key enabler for stretchable electronics. This thesis research focuses on the development of a new stretchable and screen printable conductive ink. After print and cure, this ink would be capable of being stretched by at least 500 cycles at 20% strain without increasing its resistance by more than 30 times the original resistance, while maintaining electrical and mechanical integrity. For a stretchable and screen-printable conductive ink, the correct morphology of the metal powder selected and the ability of the binder to be stretched after the sintering process, are both indispensable. This research has shown that a bi-modal mixture of fine and large-diameter silver flakes will improve stretchability. While the smaller flakes increase the conductivity and lower the sintering temperature, the larger flake particles promote ohmic connectivity during stretching. The bi-modal flake distribution increases connection points while enhancing packing density and lowering the thermal activation barrier. The polymer binder phase plays a crucial role in offering stretchability to the stretchable conductive inks. The silver flakes by themselves are not stretchable but they are contained within a stretchable binder system. The research demonstrates that commonly used printable ink binder when combined with large-chain polymers through a process known as 'elastomeric chain polymerization' will enable the conductive ink to become more stretchable. This research has shown that the new stretchable and screen printable silver conductive ink developed based upon the two insights mentioned above; (1) bi modal flakes to improve ohmic connectivity during stretching and (2) elastomeric chain polymerized binder system which could stretch even after the ink is sintered to the substrate, can exhibit an ink stretchability of at least 500 cycles at 20% strain while increasing the resistance by less than 30 times the original resistance. Wavy print patterns can enhance the stretchability of stretchable conductors. The research also demonstrates that FEA modeling, simulating the total principal strain on the printed patterns, can be used to estimate the comparative resistance changes caused by stretching and these changes can be explained by some basic equations from Percolation Theory.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
650 4 $a Materials science. $3 557839
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
690 $a 0794
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a University of Maryland, College Park. $b Mechanical Engineering. $3 1178917
773 0 $t Dissertation Abstracts International $g 78-11B(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10255108 $z click for full text (PQDT)