語系:
繁體中文
English
說明(常見問題)
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Modeling and Simulation of a Hybrid ...
~
Kareri, Tareq.
Modeling and Simulation of a Hybrid PV/Wind/Battery Storage Off-Grid Power System.
紀錄類型:
書目-語言資料,手稿 : Monograph/item
正題名/作者:
Modeling and Simulation of a Hybrid PV/Wind/Battery Storage Off-Grid Power System./
作者:
Kareri, Tareq.
面頁冊數:
1 online resource (99 pages)
附註:
Source: Masters Abstracts International, Volume: 56-06.
Contained By:
Masters Abstracts International56-06(E).
標題:
Electrical engineering. -
電子資源:
click for full text (PQDT)
ISBN:
9780355298727
Modeling and Simulation of a Hybrid PV/Wind/Battery Storage Off-Grid Power System.
Kareri, Tareq.
Modeling and Simulation of a Hybrid PV/Wind/Battery Storage Off-Grid Power System.
- 1 online resource (99 pages)
Source: Masters Abstracts International, Volume: 56-06.
Thesis (M.S.)
Includes bibliographical references
Many parts of remote areas in the world are not connected to the electrical grid even with current advanced technology. Hybrid renewable energy systems (HRES) are very suitable to supply electricity to remote and isolated areas. This paper focuses on the modeling, analysis, and simulation of a hybrid (Photovoltaic/Wind/Battery Storage) power system. The PV and wind energy systems are used as primary energy systems and the battery is used as a backup energy system. The battery storage system is used to store extra power from the hybrid PV/wind system, and to supply continuous power to load when the hybrid system power is less than load power. A bidirectional DC DC converter controlled by a fuzzy logic controller (FLC) is used to manage and regulate the energy system. A control technique which is maximum power point tracking (MPPT) has been applied to capture the maximum power point from the PV system and the wind energy system. DC-DC converters are used with MPPT controller to reduce losses in the hybrid system. The solar photovoltaic (PV) and wind turbine generator systems are studied under changing environmental conditions. MATLAB/Simulink software is used to model, simulate, and analyze the entire hybrid system.
Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018
Mode of access: World Wide Web
ISBN: 9780355298727Subjects--Topical Terms:
596380
Electrical engineering.
Index Terms--Genre/Form:
554714
Electronic books.
Modeling and Simulation of a Hybrid PV/Wind/Battery Storage Off-Grid Power System.
LDR
:02520ntm a2200361Ki 4500
001
911241
005
20180529081900.5
006
m o u
007
cr mn||||a|a||
008
190606s2017 xx obm 000 0 eng d
020
$a
9780355298727
035
$a
(MiAaPQ)AAI10285297
035
$a
(MiAaPQ)niu:12901
035
$a
AAI10285297
040
$a
MiAaPQ
$b
eng
$c
MiAaPQ
099
$a
TUL
$f
hyy
$c
available through World Wide Web
100
1
$a
Kareri, Tareq.
$3
1182941
245
1 0
$a
Modeling and Simulation of a Hybrid PV/Wind/Battery Storage Off-Grid Power System.
264
0
$c
2017
300
$a
1 online resource (99 pages)
336
$a
text
$b
txt
$2
rdacontent
337
$a
computer
$b
c
$2
rdamedia
338
$a
online resource
$b
cr
$2
rdacarrier
500
$a
Source: Masters Abstracts International, Volume: 56-06.
500
$a
Adviser: Donald S. Zinger.
502
$a
Thesis (M.S.)
$c
Northern Illinois University
$d
2017.
504
$a
Includes bibliographical references
520
$a
Many parts of remote areas in the world are not connected to the electrical grid even with current advanced technology. Hybrid renewable energy systems (HRES) are very suitable to supply electricity to remote and isolated areas. This paper focuses on the modeling, analysis, and simulation of a hybrid (Photovoltaic/Wind/Battery Storage) power system. The PV and wind energy systems are used as primary energy systems and the battery is used as a backup energy system. The battery storage system is used to store extra power from the hybrid PV/wind system, and to supply continuous power to load when the hybrid system power is less than load power. A bidirectional DC DC converter controlled by a fuzzy logic controller (FLC) is used to manage and regulate the energy system. A control technique which is maximum power point tracking (MPPT) has been applied to capture the maximum power point from the PV system and the wind energy system. DC-DC converters are used with MPPT controller to reduce losses in the hybrid system. The solar photovoltaic (PV) and wind turbine generator systems are studied under changing environmental conditions. MATLAB/Simulink software is used to model, simulate, and analyze the entire hybrid system.
533
$a
Electronic reproduction.
$b
Ann Arbor, Mich. :
$c
ProQuest,
$d
2018
538
$a
Mode of access: World Wide Web
650
4
$a
Electrical engineering.
$3
596380
650
4
$a
Alternative Energy.
$3
845381
650
4
$a
Energy.
$3
784773
655
7
$a
Electronic books.
$2
local
$3
554714
690
$a
0544
690
$a
0363
690
$a
0791
710
2
$a
ProQuest Information and Learning Co.
$3
1178819
710
2
$a
Northern Illinois University.
$b
Electrical Engineering.
$3
1182942
773
0
$t
Masters Abstracts International
$g
56-06(E).
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10285297
$z
click for full text (PQDT)
筆 0 讀者評論
多媒體
評論
新增評論
分享你的心得
Export
取書館別
處理中
...
變更密碼[密碼必須為2種組合(英文和數字)及長度為10碼以上]
登入