國立虎尾科技大學 |

Microstructural Analysis of Ti-6Al-4V Components Made by Electron Beam Additive Manufacturing.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Microstructural Analysis of Ti-6Al-4V Components Made by Electron Beam Additive Manufacturing./
作者:	Coleman, Rashadd L.
面頁冊數:	1 online resource (95 pages)
附註:	Source: Dissertation Abstracts International, Volume: 79-02(E), Section: B.
標題:	Materials science. -
電子資源:	click for full text (PQDT)
ISBN:	9780355352887

Microstructural Analysis of Ti-6Al-4V Components Made by Electron Beam Additive Manufacturing.
Coleman, Rashadd L.

Microstructural Analysis of Ti-6Al-4V Components Made by Electron Beam Additive Manufacturing. - 1 online resource (95 pages)

Source: Dissertation Abstracts International, Volume: 79-02(E), Section: B.

Thesis (Ph.D.)--The University of Alabama, 2017.

Includes bibliographical references

Electron Beam Additive Manufacturing (EBAM) is a relatively new additive manufacturing (AM) technology that uses a high-energy electron beam to melt and fuse powders to build full-density parts in a layer by layer fashion. EBAM can fabricate metallic components, particularly, of complex shapes, in an efficient and cost-effective manner compared to conventional manufacturing means. EBAM is an enabling technology for rapid manufacturing (RM) of metallic components, and thus, can efficiently integrate the design and manufacturing of aerospace components. However, EBAM for aerospace-related applications remain limited because the effect of the EBAM process on part characteristics is not fully understood. In this study, various techniques including microhardness, optical microscopy (OM), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and electron backscatter diffraction (EBSD) were used to characterize Ti-6Al-4V components processed using EBAM. The results were compared to Ti-6Al-4V components processed using conventional techniques. In this study it is shown that EBAM built Ti-64 components have increased hardness, elastic modulus, and yield strength compared to wrought Ti-6Al-4V. Further, it is also shown in this study that the horizontal build EBAM Ti-6Al-4V has increased hardness, elastic modulus, and yield strength compared to vertical build EBAM due to a preferential growth of the beta phase.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9780355352887Subjects--Topical Terms:

557839
Materials science.
Index Terms--Genre/Form:

554714
Electronic books.

Microstructural Analysis of Ti-6Al-4V Components Made by Electron Beam Additive Manufacturing.
LDR:02609ntm a2200325K 4500 001 912379
005 20180608141653.5
006 m o u
007 cr mn||||a|a||
008 190606s2017 xx obm 000 0 eng d
020 $a 9780355352887
035 $a (MiAaPQ)AAI10603400
035 $a (MiAaPQ)alatus:13253
035 $a AAI10603400
040 $a MiAaPQ $b eng $c MiAaPQ
100 1 $a Coleman, Rashadd L. $3 1184717
245 1 0 $a Microstructural Analysis of Ti-6Al-4V Components Made by Electron Beam Additive Manufacturing.
264 0 $c 2017
300 $a 1 online resource (95 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 79-02(E), Section: B.
500 $a Adviser: Viola L. Acoff.
502 $a Thesis (Ph.D.)--The University of Alabama, 2017.
504 $a Includes bibliographical references
520 $a Electron Beam Additive Manufacturing (EBAM) is a relatively new additive manufacturing (AM) technology that uses a high-energy electron beam to melt and fuse powders to build full-density parts in a layer by layer fashion. EBAM can fabricate metallic components, particularly, of complex shapes, in an efficient and cost-effective manner compared to conventional manufacturing means. EBAM is an enabling technology for rapid manufacturing (RM) of metallic components, and thus, can efficiently integrate the design and manufacturing of aerospace components. However, EBAM for aerospace-related applications remain limited because the effect of the EBAM process on part characteristics is not fully understood. In this study, various techniques including microhardness, optical microscopy (OM), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and electron backscatter diffraction (EBSD) were used to characterize Ti-6Al-4V components processed using EBAM. The results were compared to Ti-6Al-4V components processed using conventional techniques. In this study it is shown that EBAM built Ti-64 components have increased hardness, elastic modulus, and yield strength compared to wrought Ti-6Al-4V. Further, it is also shown in this study that the horizontal build EBAM Ti-6Al-4V has increased hardness, elastic modulus, and yield strength compared to vertical build EBAM due to a preferential growth of the beta phase.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Materials science. $3 557839
650 4 $a Mechanical engineering. $3 557493
655 7 $a Electronic books. $2 local $3 554714
690 $a 0794
690 $a 0548
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a The University of Alabama. $b Metallurgical and Materials Engineering. $3 1184718
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10603400 $z click for full text (PQDT)