國立虎尾科技大學 |

Theoretical design and material growth of Type-II Antimonide-based superlattices for multi-spectral infrared detection and imaging.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Theoretical design and material growth of Type-II Antimonide-based superlattices for multi-spectral infrared detection and imaging./
作者:	Hoang, Anh Minh.
面頁冊數:	1 online resource (242 pages)
附註:	Source: Dissertation Abstracts International, Volume: 78-02(E), Section: B.
標題:	Electrical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9781369153545

Theoretical design and material growth of Type-II Antimonide-based superlattices for multi-spectral infrared detection and imaging.
Hoang, Anh Minh.

Theoretical design and material growth of Type-II Antimonide-based superlattices for multi-spectral infrared detection and imaging. - 1 online resource (242 pages)

Source: Dissertation Abstracts International, Volume: 78-02(E), Section: B.

Thesis (Ph.D.)--Northwestern University, 2016.

Includes bibliographical references

Infrared detectors find applications in many aspects of life, from night vision, target tracking for homeland security and defense, non-destructive failure detection in industry, chemical sensing in medicine, and free-space communication. Currently, the dominant technologies of photodetectors based upon HgCdTe and InSb are experiencing many limitations. Under this circumstance, the Type-II InAs/GaSb/AlSb superlattices which have been intensively studied recently appear to be an excellent candidate to give breakthroughs in the infrared technology. The Type-II SLs with theirs advantages such as great flexibility in bandgap engineering, high carrier effective mass, Auger recombination suppression and high uniformity have shown excellent device performance from MWIR to VLWIR. In the era of the third generation for infrared cameras, Type-II SLs are entering the new phase of development with high performance and multi-spectral detection.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9781369153545Subjects--Topical Terms:

596380
Electrical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Theoretical design and material growth of Type-II Antimonide-based superlattices for multi-spectral infrared detection and imaging.
LDR:05466ntm a2200373K 4500 001 913876
005 20180628100930.5
006 m o u
007 cr mn||||a|a||
008 190606s2016 xx obm 000 0 eng d
020 $a 9781369153545
035 $a (MiAaPQ)AAI10160447
035 $a (MiAaPQ)northwestern:13311
035 $a AAI10160447
040 $a MiAaPQ $b eng $c MiAaPQ
100 1 $a Hoang, Anh Minh. $3 1186891
245 1 0 $a Theoretical design and material growth of Type-II Antimonide-based superlattices for multi-spectral infrared detection and imaging.
264 0 $c 2016
300 $a 1 online resource (242 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 78-02(E), Section: B.
500 $a Adviser: Manijeh Razeghi.
502 $a Thesis (Ph.D.)--Northwestern University, 2016.
504 $a Includes bibliographical references
520 $a Infrared detectors find applications in many aspects of life, from night vision, target tracking for homeland security and defense, non-destructive failure detection in industry, chemical sensing in medicine, and free-space communication. Currently, the dominant technologies of photodetectors based upon HgCdTe and InSb are experiencing many limitations. Under this circumstance, the Type-II InAs/GaSb/AlSb superlattices which have been intensively studied recently appear to be an excellent candidate to give breakthroughs in the infrared technology. The Type-II SLs with theirs advantages such as great flexibility in bandgap engineering, high carrier effective mass, Auger recombination suppression and high uniformity have shown excellent device performance from MWIR to VLWIR. In the era of the third generation for infrared cameras, Type-II SLs are entering the new phase of development with high performance and multi-spectral detection.
520 $a The goal of this work is to investigate quantum properties of the superlattice system, design appropriate device architectures and experimentally fabricate infrared detectors which can push further the limit of this material system and outperform existing competing technologies. The binary-binary InAs/GaSb superlattice has gone through much transformation over the years. Incorporating compounds lattice matched to the 6.1A family has invited more possibilities to band engineer the Type-II SLs. For the first time, by employing all three members of this material system, we have designed a new superlattice structure and demonstrated shortwavelength infrared (SWIR) photodiodes based on Type-II InAs/GaSb/AlSb with high electrical and optical performance. The photodiodes exhibited a quantum efficiency of 60% with very low dark current, can be operated at room temperature. In addition to the range of MWIR to VLWIR, a new channel of detection has been added to the GaSb based type-II SL material system.
520 $a The new realization of SWIR photodiodes has led to the possibility of incorporating this channel to the multi-spectral detection. By combining with the MWIR channel, dual-band SWIR-MWIR photodiodes and focal plane arrays have been demonstrated, giving the capability of delivering both active and passive imaging in one single camera. Dual-band SWIR-MWIR photodiodes with quantum efficiency more than 50% for each channel has been achieved. Just like visible imaging, besides the available dual-band detection, the prospect of incorporating the third infrared waveband detection is very promising for a wide range of applications. However, the challenges for making such devices are so many that little success has been achieved. In the work, we also propose a new approach in device design to realize bias-selectable three-color shortwave-midwave-longwave infrared photodetector based on InAs/GaSb/AlSb type-II superlattice. The effect of conduction band off-set and different doping levels between two absorption layers are employed to control the turn-on voltage for individual channels. For the first time, we demonstrate experimentally Type-II superlattice based three-color photodiodes without using additional terminal contacts. As the applied bias voltage varies, the photodiodes exhibit sequentially the behavior of three different colors, corresponding to the bandgap of three absorbers. Well defined cut-offs and high quantum efficiency in each channel are achieved. While retaining the simplicity in device fabrication, this demonstration opens the new prospect for three-color infrared imaging.
520 $a Finally, for further improvement, we are looking toward new type-II material called InAs/InAsSb superlattices. Theoretical design and growth techniques have been developed to investigate the properties of this material. We successfully demonstrated the design and growth of MWIR to VLWIR photodiodes based on Type-II InAs/InAsSb with high performance. Given the fact that these two Type-II material systems share the same GaSb substrate, a new incorporation could further fully exploit their advantages in the near future.
520 $a Theoretical design, growth and optimization of device performance in each work are discussed.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Electrical engineering. $3 596380
650 4 $a Nanotechnology. $3 557660
655 7 $a Electronic books. $2 local $3 554714
690 $a 0544
690 $a 0652
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Northwestern University. $b Electrical and Computer Engineering. $3 1186892
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10160447 $z click for full text (PQDT)