國立虎尾科技大學 |

Advanced Techniques for Design and Characterization of Front-End Circuits and Systems-on-Chip.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Advanced Techniques for Design and Characterization of Front-End Circuits and Systems-on-Chip./
作者:	Ding, Wenxiang.
面頁冊數:	1 online resource (84 pages)
附註:	Source: Dissertation Abstracts International, Volume: 79-03(E), Section: B.
標題:	Electrical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9780355247213

Advanced Techniques for Design and Characterization of Front-End Circuits and Systems-on-Chip.
Ding, Wenxiang.

Advanced Techniques for Design and Characterization of Front-End Circuits and Systems-on-Chip. - 1 online resource (84 pages)

Source: Dissertation Abstracts International, Volume: 79-03(E), Section: B.

Thesis (Ph.D.)--State University of New York at Stony Brook, 2017.

Includes bibliographical references

In physics research, an accelerator is a large machine able to bring particles like electrons and protons to a very high speed, as close as the speed of light. Some accelerators, such as the Large Hadron Collider (LHC) at CERN are designed to make the particles collide to generate and possibly discover new particles. Other accelerators, such as the one at the National Synchrotron Light Source II (NSLS II) in Brookhaven National Laboratory (BNL) are designed to generate, from the accelerated particles, high energy photons like X-ray, which are then used as a characterization tool in science research. Information, such as position and energy of the particles, or intensity and profile of the X-ray beam, is crucial to either reconstruct the particle trajectory to infer the collision process or to characterize and use the tool itself. Detection systems are designed to detect and collect information, such as energy, timing, and position of these high-energy particles or photons. Such a detection system consists of sensors and front-end circuits. Sensors interact with particles of interest and generate electrical signals such as currents or charges. Front-end circuits interface directly with sensors and read out its signals. Signals are typically amplified, shaped (or filtered), and digitized through several signal processing stages. In this thesis, I will introduce two detection systems, and will focus on the design and characterization of the front-end circuits. The first system is an X-ray beam monitor. It is designed to measure the position, intensity and profile of the X-ray beam at NSLS II. The sensor is built with diamond and it is segmented in 32x32 effective elements (pixels). The 32-channel bias voltage switching circuit and the 32-channel readout circuit are designed with discrete devices, and provide bias voltage switching and readout of current signals generated in diamond elements. A control and data processing subsystem is implemented on a Xilinx System-on-Chip (SoC) with a dual-core ARM processor and an FPGA. The system is now in operation at the XFP beamline of the NSLS II. The second system is a particle detector for the LHC. I will briefly talk about the sensors and then introduce an advanced low-noise mixed-signal front-end Application-Specific Integrated Circuit (ASIC) called VMM currently being finalized for production.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9780355247213Subjects--Topical Terms:

596380
Electrical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Advanced Techniques for Design and Characterization of Front-End Circuits and Systems-on-Chip.
LDR:03564ntm a2200313K 4500 001 913980
005 20180628100932.5
006 m o u
007 cr mn||||a|a||
008 190606s2017 xx obm 000 0 eng d
020 $a 9780355247213
035 $a (MiAaPQ)AAI10622544
035 $a (MiAaPQ)grad.sunysb:13479
035 $a AAI10622544
040 $a MiAaPQ $b eng $c MiAaPQ
100 1 $a Ding, Wenxiang. $3 1187030
245 1 0 $a Advanced Techniques for Design and Characterization of Front-End Circuits and Systems-on-Chip.
264 0 $c 2017
300 $a 1 online resource (84 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 79-03(E), Section: B.
500 $a Adviser: Gianluigi De Geronimo.
502 $a Thesis (Ph.D.)--State University of New York at Stony Brook, 2017.
504 $a Includes bibliographical references
520 $a In physics research, an accelerator is a large machine able to bring particles like electrons and protons to a very high speed, as close as the speed of light. Some accelerators, such as the Large Hadron Collider (LHC) at CERN are designed to make the particles collide to generate and possibly discover new particles. Other accelerators, such as the one at the National Synchrotron Light Source II (NSLS II) in Brookhaven National Laboratory (BNL) are designed to generate, from the accelerated particles, high energy photons like X-ray, which are then used as a characterization tool in science research. Information, such as position and energy of the particles, or intensity and profile of the X-ray beam, is crucial to either reconstruct the particle trajectory to infer the collision process or to characterize and use the tool itself. Detection systems are designed to detect and collect information, such as energy, timing, and position of these high-energy particles or photons. Such a detection system consists of sensors and front-end circuits. Sensors interact with particles of interest and generate electrical signals such as currents or charges. Front-end circuits interface directly with sensors and read out its signals. Signals are typically amplified, shaped (or filtered), and digitized through several signal processing stages. In this thesis, I will introduce two detection systems, and will focus on the design and characterization of the front-end circuits. The first system is an X-ray beam monitor. It is designed to measure the position, intensity and profile of the X-ray beam at NSLS II. The sensor is built with diamond and it is segmented in 32x32 effective elements (pixels). The 32-channel bias voltage switching circuit and the 32-channel readout circuit are designed with discrete devices, and provide bias voltage switching and readout of current signals generated in diamond elements. A control and data processing subsystem is implemented on a Xilinx System-on-Chip (SoC) with a dual-core ARM processor and an FPGA. The system is now in operation at the XFP beamline of the NSLS II. The second system is a particle detector for the LHC. I will briefly talk about the sensors and then introduce an advanced low-noise mixed-signal front-end Application-Specific Integrated Circuit (ASIC) called VMM currently being finalized for production.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Electrical engineering. $3 596380
655 7 $a Electronic books. $2 local $3 554714
690 $a 0544
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a State University of New York at Stony Brook. $b Electrical Engineering. $3 1187031
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10622544 $z click for full text (PQDT)