國立虎尾科技大學 |

Structural Characteristics and Corrosion Behavior of Bio-Degradable Zn-Li Alloys in Stent Application.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Structural Characteristics and Corrosion Behavior of Bio-Degradable Zn-Li Alloys in Stent Application./
作者:	Zhao, Shan.
面頁冊數:	1 online resource (128 pages)
附註:	Source: Dissertation Abstracts International, Volume: 78-10(E), Section: B.
標題:	Materials science. -
電子資源:	click for full text (PQDT)
ISBN:	9781369820447

Structural Characteristics and Corrosion Behavior of Bio-Degradable Zn-Li Alloys in Stent Application.
Zhao, Shan.

Structural Characteristics and Corrosion Behavior of Bio-Degradable Zn-Li Alloys in Stent Application. - 1 online resource (128 pages)

Source: Dissertation Abstracts International, Volume: 78-10(E), Section: B.

Thesis (Ph.D.)--Michigan Technological University, 2017.

Includes bibliographical references

Zinc has begun to be studied as a bio-degradable material in recent years due to its excellent corrosion rate and optimal biocompatibility. Unfortunately, pure Zn's intrinsic ultimate tensile strength (UTS; below 120 MPa) is lower than the benchmark (about 300 MPa) for cardiovascular stent materials, raising concerns about sufficient strength to support the blood vessel. Thus, modifying pure Zn to improve its mechanical properties is an important research topic. In this dissertation project, a new Zn-Li alloy has been developed to retain the outstanding corrosion behavior from Zn while improving the mechanical characteristics and uniform biodegradation once it is implanted into the artery of Sprague-Dawley rats. The completed work includes:

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9781369820447Subjects--Topical Terms:

557839
Materials science.
Index Terms--Genre/Form:

554714
Electronic books.

Structural Characteristics and Corrosion Behavior of Bio-Degradable Zn-Li Alloys in Stent Application.
LDR:02899ntm a2200325K 4500 001 914133
005 20180703084422.5
006 m o u
007 cr mn||||a|a||
008 190606s2017 xx obm 000 0 eng d
020 $a 9781369820447
035 $a (MiAaPQ)AAI10266745
035 $a (MiAaPQ)michigantech:11278
035 $a AAI10266745
040 $a MiAaPQ $b eng $c MiAaPQ
100 1 $a Zhao, Shan. $3 1187248
245 1 0 $a Structural Characteristics and Corrosion Behavior of Bio-Degradable Zn-Li Alloys in Stent Application.
264 0 $c 2017
300 $a 1 online resource (128 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 78-10(E), Section: B.
500 $a Advisers: Jaroslaw W. Drelich; Jeremy Goldman.
502 $a Thesis (Ph.D.)--Michigan Technological University, 2017.
504 $a Includes bibliographical references
520 $a Zinc has begun to be studied as a bio-degradable material in recent years due to its excellent corrosion rate and optimal biocompatibility. Unfortunately, pure Zn's intrinsic ultimate tensile strength (UTS; below 120 MPa) is lower than the benchmark (about 300 MPa) for cardiovascular stent materials, raising concerns about sufficient strength to support the blood vessel. Thus, modifying pure Zn to improve its mechanical properties is an important research topic. In this dissertation project, a new Zn-Li alloy has been developed to retain the outstanding corrosion behavior from Zn while improving the mechanical characteristics and uniform biodegradation once it is implanted into the artery of Sprague-Dawley rats. The completed work includes:
520 $a Manufactured Zn-Li alloy ingots and sheets via induction vacuum casting, melt spinning, hot rolling deformation, and wire electro discharge machining (wire EDM) technique; processed alloy samples using cross sectioning, mounting, etching and polishing technique; • Characterized alloy ingots, sheets and wires using hardness and tensile test, XRD, BEI imaging, SEM, ESEM, FTIR, ICP-OES and electrochemical test; then selected the optimum composition for in vitro and in vivo experiments; • Mimicked the degradation behavior of the Zn-Li alloy in vitro using simulated body fluid (SBF) and explored the relations between corrosion rate, corrosion products and surface morphology with changing compositions; • Explanted the Zn-Li alloy wire in abdominal aorta of rat over 12 months and studied its degradation mechanism, rate of bioabsorption, cytotoxicity and corrosion product migration from histological analysis.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Materials science. $3 557839
655 7 $a Electronic books. $2 local $3 554714
690 $a 0794
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Michigan Technological University. $b Materials Science and Engineering. $3 1182428
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10266745 $z click for full text (PQDT)