國立虎尾科技大學 |

Graphene-Based Flexible Sensors towards Electronic Wearables.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	Graphene-Based Flexible Sensors towards Electronic Wearables./
Author:	Oren, Seval.
Description:	1 online resource (99 pages)
Notes:	Source: Dissertation Abstracts International, Volume: 79-10(E), Section: B.
Subject:	Electrical engineering. -
Online resource:	click for full text (PQDT)
ISBN:	9780438074965

Graphene-Based Flexible Sensors towards Electronic Wearables.
Oren, Seval.

Graphene-Based Flexible Sensors towards Electronic Wearables. - 1 online resource (99 pages)

Source: Dissertation Abstracts International, Volume: 79-10(E), Section: B.

Thesis (Ph.D.)--Iowa State University, 2018.

Includes bibliographical references

Flexible electronics and wearable devices have attracted considerable attention because they produce mechanical liberty, in terms of flexibility and stretchability that can enable the possibility of a wide range of new applications. The term "wearable electronics" can be used to define devices that can be worn or mated with the sensed surface to continuously monitor signals without limitations on mechanical deformability of the devices and electronic performance of the functional materials. The use of polymeric substrates or other nonconventional substrates as base materials brings novel functionalities to sensors and other electronic devices in terms of being flexible and light weight. Conductive nanomaterials, such as carbon nanotubes and graphene have been utilized as functional materials for flexible electronics and wearable devices. Graphene has specifically been considered for producing next-generation sensors due to its impressive electrical and mechanical properties and a result, incorporation of flexible substrates and graphene-based nanomaterials has been widely utilized to form versatile flexible sensors and other wearable devices through use of different fabrication processes.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9780438074965Subjects--Topical Terms:

596380
Electrical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Graphene-Based Flexible Sensors towards Electronic Wearables.
LDR:05070ntm a2200373K 4500 001 915568
005 20180803124552.5
006 m o u
007 cr mn||||a|a||
008 190606s2018 xx obm 000 0 eng d
020 $a 9780438074965
035 $a (MiAaPQ)AAI10789840
035 $a (MiAaPQ)iastate:17274
035 $a AAI10789840
040 $a MiAaPQ $b eng $c MiAaPQ
100 1 $a Oren, Seval. $3 1188962
245 1 0 $a Graphene-Based Flexible Sensors towards Electronic Wearables.
264 0 $c 2018
300 $a 1 online resource (99 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 79-10(E), Section: B.
500 $a Advisers: Liang Dong; Halil Ceylan.
502 $a Thesis (Ph.D.)--Iowa State University, 2018.
504 $a Includes bibliographical references
520 $a Flexible electronics and wearable devices have attracted considerable attention because they produce mechanical liberty, in terms of flexibility and stretchability that can enable the possibility of a wide range of new applications. The term "wearable electronics" can be used to define devices that can be worn or mated with the sensed surface to continuously monitor signals without limitations on mechanical deformability of the devices and electronic performance of the functional materials. The use of polymeric substrates or other nonconventional substrates as base materials brings novel functionalities to sensors and other electronic devices in terms of being flexible and light weight. Conductive nanomaterials, such as carbon nanotubes and graphene have been utilized as functional materials for flexible electronics and wearable devices. Graphene has specifically been considered for producing next-generation sensors due to its impressive electrical and mechanical properties and a result, incorporation of flexible substrates and graphene-based nanomaterials has been widely utilized to form versatile flexible sensors and other wearable devices through use of different fabrication processes.
520 $a Creation of a large-scale, simple, high-resolution and cost-effective technique that overcomes fabrication limitations and supports production of flexible graphene-based sensors with high flexibility and stretch ability is highly demanding. Soft lithography can be merged with a mechanical exfoliation process using adhesive tape followed by transfer printing to form a graphene sensor on a desired final substrate. In situ microfluidic casting of graphene into channels is another promising platform driving the rapid development of flexible graphene sensors and wearable devices with a wide dynamic detection range. Selective coating of graphene-based nanomaterials (e.g. graphene oxide (GO)) on flexible electrode tapes can, because of its flexibility and adhesive features, be used to track relative humidity (RH) variations at the surface of target surfaces. This thesis describes the design and development of flexible and wearable strain, pressure and humidity sensors based on a novel tape-based cost-effective patterning and transferring technique, an in situ microfluidic casting method, and a novel selective coating technique for graphene-based nanomaterials.
520 $a First of all, we present a tape-based graphene patterning and transferring approach to production of graphene sensors on elastomeric substrates and adhesive tapes. The method utilizes the work of adhesion at the interface between two contacting materials as determined by their surface energies to pattern graphene on PDMS substrate and transfer it onto a target tape. We have achieved patterning and transferring method with the features of high pattern spatial resolution, thickness control, and process simplicity with respect to functional materials and pattern geometries. We have demonstrated the usage of flexible graphene sensors on tape to realize interaction with structures, humans, and plants for real-time monitoring of important signals.
520 $a Secondly, we present a helical spring-like piezo resistive graphene sensor formed within a microfluidic channel using a unique and easy in situ microfluidic casting method. Because of its helical shape, the sensor exhibits a wide dynamic detection range as well as mechanical flexibility and stretch ability.
520 $a Finally, we present a flexible GO-based RH sensor on an adhesive polyimide thin film realized by selectively coating and patterning GO at the surface of Au Interdigitated electrodes (IDEs) and subsequently peeling the device from a temporary PDMS film. Real-time monitoring of the water movement inside the plant has been demonstrated by installing GO-based RH sensor at the surfaces of different plant leaves.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Electrical engineering. $3 596380
650 4 $a Engineering. $3 561152
655 7 $a Electronic books. $2 local $3 554714
690 $a 0544
690 $a 0537
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Iowa State University. $b Electrical and Computer Engineering. $3 1179387
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10789840 $z click for full text (PQDT)