國立虎尾科技大學 |

Modeling and analysis of PZT micropower generator.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	Modeling and analysis of PZT micropower generator./
Author:	Ajitsaria, Jyoti K.
Description:	1 online resource (157 pages)
Notes:	Source: Dissertation Abstracts International, Volume: 70-02, Section: B, page: 1289.
Contained By:	Dissertation Abstracts International70-02B.
Subject:	Mechanical engineering. -
Online resource:	click for full text (PQDT)
ISBN:	9781109043488

Modeling and analysis of PZT micropower generator.
Ajitsaria, Jyoti K.

Modeling and analysis of PZT micropower generator. - 1 online resource (157 pages)

Source: Dissertation Abstracts International, Volume: 70-02, Section: B, page: 1289.

Thesis (Ph.D.)--Auburn University, 2008.

Includes bibliographical references

The goal of this research is to theoretically and experimentally investigate behaviors of a power harvesting system that was constructed with a bimorph cantilever made of Lead Zirconate Titanate (Pb[ZrxTi1-x]O 3) and a tungsten proof mass. The device should be capable of generating power in an environment where vibration frequency is around 100Hz, and the vibration amplitude is greater than 9.8m/s2, and within the temperature range from -20°C to 80°C.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9781109043488Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Modeling and analysis of PZT micropower generator.
LDR:04296ntm a2200349Ki 4500 001 915997
005 20180907134545.5
006 m o u
007 cr mn||||a|a||
008 190606s2008 xx obm 000 0 eng d
020 $a 9781109043488
035 $a (MiAaPQ)AAI3348253
035 $a AAI3348253
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Ajitsaria, Jyoti K. $3 1189562
245 1 0 $a Modeling and analysis of PZT micropower generator.
264 0 $c 2008
300 $a 1 online resource (157 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 70-02, Section: B, page: 1289.
500 $a Adviser: Song-Yul Choe.
502 $a Thesis (Ph.D.)--Auburn University, 2008.
504 $a Includes bibliographical references
520 $a The goal of this research is to theoretically and experimentally investigate behaviors of a power harvesting system that was constructed with a bimorph cantilever made of Lead Zirconate Titanate (Pb[ZrxTi1-x]O 3) and a tungsten proof mass. The device should be capable of generating power in an environment where vibration frequency is around 100Hz, and the vibration amplitude is greater than 9.8m/s2, and within the temperature range from -20°C to 80°C.
520 $a The basic materials selected for the device was soft Lead Zirconium Titanate (PZT-5H) because of the accessible large strain, acceptable mechanical strength and high piezoelectric constant. The main factors considered in the research were the resonant frequency, the output power density, power conversion circuitry and the effects of temperature. Consistent with the goal, mathematical models were developed for the device and experimentally compared with the power outputs. Primarily, development of the models aimed at prediction of the power output from the bimorph PZT cantilever structure. The device used for validation of the models were designed and fabricated by a research group in the Materials Engineering directed by Dr. Dong-Joo Kim.
520 $a Three different mathematical models were developed with a focus on power output and efficiency. The first model for the device was approached with lumped electrical components that result in an electrical equivalent circuit. The second model used the energy conservation principal in conjunction with the PZT constitutive equations to estimate the power output. The third model was derived from the principle of couple field analysis that separately models the mechanical and electrical components of the generator and then coupled together with electro-mechanical coupling based on PZT constitutive equations.
520 $a Based on the comparison of the simulation and experimental data, it was found that the coupled field model better predicts the power output and efficiency of the device as compared with the other two models. For this reason, the coupled field model was used for further analysis of effect of temperature on the power generation and efficiency of the device. Power generation experiments were then conducted to assess the accuracy of the model for prediction of the effect of temperature on power output from the device. The mathematical models developed were implemented in Matlab/Simulink and compared with experimental data to assess performance of the model. Analysis also included AC/DC power conversion using a bridge rectifier circuit, DC/DC converter and a load tester. The voltage and power results show that the results are reasonably close to the experimental data when the natural frequencies match, which is expected. The experimental results and analysis also reveals that the increase or decrease in temperature has an effect on both the resonant frequency and the power output. The resonant frequency of the bimorph PZT cantilever and power output decreases with an increase in temperature which matches quite well with the simulation results from the coupled field model.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Auburn University. $3 1189563
773 0 $t Dissertation Abstracts International $g 70-02B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3348253 $z click for full text (PQDT)