國立虎尾科技大學 |

Modeling and Motion Planning for In-Hand Sliding Manipulation.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Modeling and Motion Planning for In-Hand Sliding Manipulation./
作者:	Shi, Jian.
面頁冊數:	1 online resource (129 pages)
附註:	Source: Dissertation Abstracts International, Volume: 79-11(E), Section: B.
Contained By:	Dissertation Abstracts International79-11B(E).
標題:	Robotics. -
電子資源:	click for full text (PQDT)
ISBN:	9780438116603

Modeling and Motion Planning for In-Hand Sliding Manipulation.
Shi, Jian.

Modeling and Motion Planning for In-Hand Sliding Manipulation. - 1 online resource (129 pages)

Source: Dissertation Abstracts International, Volume: 79-11(E), Section: B.

Thesis (Ph.D.)--Northwestern University, 2018.

Includes bibliographical references

This thesis studies the in-hand manipulation problem of repositioning finger contacts on an object by controlled sliding. In this thesis we investigate two versions of the problem. First for a multifingered hand with circle patch contacts, we present a framework for planning the motion of the hand to create an inertial load on the grasped object to achieve a desired in-grasp sliding motion. The model of the sliding dynamics is based on a soft-finger limit surface contact model at each fingertip. A motion planner is derived to automatically solve for the finger motions for a given initial and desired configuration of the object relative to the fingers. Iterative planning and execution is shown to reduce errors that occur due to modeling and trajectory tracking errors. The framework is applied to the problem of regrasping a laminar object held in a pinch grasp. We propose a limit surface model of the contact pressure distribution at each finger to predict sliding directions. Experimental validations are shown, including iterative error reduction and repeatability of the experiment.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9780438116603Subjects--Topical Terms:

561941
Robotics.
Index Terms--Genre/Form:

554714
Electronic books.

Modeling and Motion Planning for In-Hand Sliding Manipulation.
LDR:03355ntm a2200361Ki 4500 001 917147
005 20181005115849.5
006 m o u
007 cr mn||||a|a||
008 190606s2018 xx obm 000 0 eng d
020 $a 9780438116603
035 $a (MiAaPQ)AAI10815683
035 $a (MiAaPQ)northwestern:14121
035 $a AAI10815683
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Shi, Jian. $3 1191095
245 1 0 $a Modeling and Motion Planning for In-Hand Sliding Manipulation.
264 0 $c 2018
300 $a 1 online resource (129 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 79-11(E), Section: B.
500 $a Includes supplementary digital materials.
500 $a Adviser: Kevin M. Lynch.
502 $a Thesis (Ph.D.)--Northwestern University, 2018.
504 $a Includes bibliographical references
520 $a This thesis studies the in-hand manipulation problem of repositioning finger contacts on an object by controlled sliding. In this thesis we investigate two versions of the problem. First for a multifingered hand with circle patch contacts, we present a framework for planning the motion of the hand to create an inertial load on the grasped object to achieve a desired in-grasp sliding motion. The model of the sliding dynamics is based on a soft-finger limit surface contact model at each fingertip. A motion planner is derived to automatically solve for the finger motions for a given initial and desired configuration of the object relative to the fingers. Iterative planning and execution is shown to reduce errors that occur due to modeling and trajectory tracking errors. The framework is applied to the problem of regrasping a laminar object held in a pinch grasp. We propose a limit surface model of the contact pressure distribution at each finger to predict sliding directions. Experimental validations are shown, including iterative error reduction and repeatability of the experiment.
520 $a Secondly we study quasistatic in-hand sliding manipulation with spring-sliding compliant grasps. We focus on point-contact multi-fingered grasps and the goal is to achieve object regrasping by taking advantage of external contacts with the environment. Spring compliance ensures fingers remain in contact and maps contact forces to finger compressions. By controlling finger anchor motions the contact forces can be moved to the edges of friction cones and cause sliding to realize regrasping. External contacts provide forces that maintain object force balance during the motions. We model the contact and object mechanics for multi-fingered grasps in spatial cases and analyze robust conditions in terms of finger contact wrench uncertainties. Based on the modeling a general motion planning framework is proposed. We use a two-fingered system to illustrate the analysis and detail the planning algorithm to find feasible regrasp motions maximizing robustness.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Robotics. $3 561941
650 4 $a Mechanical engineering. $3 557493
655 7 $a Electronic books. $2 local $3 554714
690 $a 0771
690 $a 0548
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Northwestern University. $b Mechanical Engineering. $3 1180174
773 0 $t Dissertation Abstracts International $g 79-11B(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10815683 $z click for full text (PQDT)