國立虎尾科技大學 |

Development of a Low Damping MEMS Resonator.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Development of a Low Damping MEMS Resonator./
作者:	Liu, Jiewen Nicky.
面頁冊數:	1 online resource (72 pages)
附註:	Source: Masters Abstracts International, Volume: 57-05.
Contained By:	Masters Abstracts International57-05(E).
標題:	Mechanical engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9780355752984

Development of a Low Damping MEMS Resonator.
Liu, Jiewen Nicky.

Development of a Low Damping MEMS Resonator. - 1 online resource (72 pages)

Source: Masters Abstracts International, Volume: 57-05.

Thesis (M.A.Sc.)--University of Windsor (Canada), 2018.

Includes bibliographical references

MEMS based low damping inertial resonators are the key element in the development of precision vibratory gyroscopes. High quality factor (Q factor) is a crucial parameter for the development of high precision inertial resonators. Q factor indicates how efficient a resonator is at retaining its energy during oscillations. Q factor can be limited by different types of energy losses, such as anchor damping, squeeze-film damping, and thermoelastic damping (TED). Understanding the energy loss-mechanism can show a path for designing high Q resonator. This thesis explores the effects of different design parameters on Q factor of 3D inertial resonators. TED loss mechanisms in a 3D non-inverted wineglass (hemispherical) shell resonator and a disk resonator were investigated. Both the disk and shell share the same vibration modes, and they are widely used as a vibratory resonator shape. Investigation with loss-mechanism shows that robust mechanical materials such as fused silica can offer ultra-low damping during oscillation. TED loss resulting from the effects of geometric parameters (such as thickness, height, and radius), mass imbalance, thickness non-uniformity, and edge defects were investigated. Glassblowing was used to fabricate hemispherical 3D shell resonators and conventional silicon based dry etching was used to fabricate micro disk resonators. The results presented in this thesis can facilitate selecting efficient geometric and material properties for achieving a higher Q-factor in 3D inertial resonators. Enhancing the Q-factor in MEMS based 3D resonators can further enable the development of high precision resonators and gyroscopes.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9780355752984Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Development of a Low Damping MEMS Resonator.
LDR:02865ntm a2200337Ki 4500 001 919630
005 20181129115239.5
006 m o u
007 cr mn||||a|a||
008 190606s2018 xx obm 000 0 eng d
020 $a 9780355752984
035 $a (MiAaPQ)AAI10746187
035 $a (MiAaPQ)uwindsor:11751
035 $a AAI10746187
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Liu, Jiewen Nicky. $3 1194246
245 1 0 $a Development of a Low Damping MEMS Resonator.
264 0 $c 2018
300 $a 1 online resource (72 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 57-05.
500 $a Advisers: Mohammed Jalal Ahamed; David Ting.
502 $a Thesis (M.A.Sc.)--University of Windsor (Canada), 2018.
504 $a Includes bibliographical references
520 $a MEMS based low damping inertial resonators are the key element in the development of precision vibratory gyroscopes. High quality factor (Q factor) is a crucial parameter for the development of high precision inertial resonators. Q factor indicates how efficient a resonator is at retaining its energy during oscillations. Q factor can be limited by different types of energy losses, such as anchor damping, squeeze-film damping, and thermoelastic damping (TED). Understanding the energy loss-mechanism can show a path for designing high Q resonator. This thesis explores the effects of different design parameters on Q factor of 3D inertial resonators. TED loss mechanisms in a 3D non-inverted wineglass (hemispherical) shell resonator and a disk resonator were investigated. Both the disk and shell share the same vibration modes, and they are widely used as a vibratory resonator shape. Investigation with loss-mechanism shows that robust mechanical materials such as fused silica can offer ultra-low damping during oscillation. TED loss resulting from the effects of geometric parameters (such as thickness, height, and radius), mass imbalance, thickness non-uniformity, and edge defects were investigated. Glassblowing was used to fabricate hemispherical 3D shell resonators and conventional silicon based dry etching was used to fabricate micro disk resonators. The results presented in this thesis can facilitate selecting efficient geometric and material properties for achieving a higher Q-factor in 3D inertial resonators. Enhancing the Q-factor in MEMS based 3D resonators can further enable the development of high precision resonators and gyroscopes.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
650 4 $a Automotive engineering. $3 1104081
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
690 $a 0540
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a University of Windsor (Canada). $b MECHANICAL ENGINEERING. $3 845409
773 0 $t Masters Abstracts International $g 57-05(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10746187 $z click for full text (PQDT)