國立虎尾科技大學 |

Beginning STM32 = developing with FreeRTOS, libopencm3 and GCC /

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Beginning STM32/ by Warren Gay.
其他題名:	developing with FreeRTOS, libopencm3 and GCC /
作者:	Gay, Warren.
出版者:	Berkeley, CA :Apress : : 2018.,
面頁冊數:	xxi, 409 p. :ill., digital ; : 24 cm.;
Contained By:	Springer eBooks
標題:	Programmable controllers. -
電子資源:	http://dx.doi.org/10.1007/978-1-4842-3624-6
ISBN:	9781484236246

Beginning STM32 = developing with FreeRTOS, libopencm3 and GCC /
Gay, Warren.

Beginning STM32developing with FreeRTOS, libopencm3 and GCC /[electronic resource] :by Warren Gay. - Berkeley, CA :Apress :2018. - xxi, 409 p. :ill., digital ;24 cm.

Chapter 1 -- Introduction -- Chapter 2 -- Software Setup -- Chapter 3 -- Power up and Blink -- Chapter 4 -- GPIO -- Chapter 5 -- FreeRTOS -- Chapter 6 -- USART -- Chapter 7 -- USB Serial -- Chapter 8 -- SPI Flash -- Chapter 9 -- Code Overlays -- Chapter 10 -- Real Time Clock (RTC) -- Chapter 11 -- I2C -- Chapter 12 -- SPI OLED -- Chapter 13 -- OLED Using DMA -- Chapter 14 -- ADC -- Chapter 15 -- Clock Tree -- Chapter 16 -- PWM With Timer 2 -- Chapter 17 -- PWM Input with Timer 4 -- Chapter 18 -- CAN Bus -- Chapter 19 -- CAN Bus Software -- Chapter 20 -- New Projects -- 21 -- Troubleshooting -- 22 -- Appendix A Answers to Exercises -- 23 -- Appendix B.

Using FreeRTOS and libopencm3 instead of the Arduino software environment, this book will help you develop multi-tasking applications that go beyond Arduino norms. In addition to the usual peripherals found in the typical Arduino device, the STM32 device includes a USB controller, RTC (Real Time Clock), DMA (Direct Memory Access controller), CAN bus and more. Each chapter contains clear explanations of the STM32 hardware capabilities to help get you started with the device, including GPIO and several other ST Microelectronics peripherals like USB and CAN bus controller. You'll learn how to download and set up the libopencm3 + FreeRTOS development environment, using GCC. With everything set up, you'll leverage FreeRTOS to create tasks, queues, and mutexes. You'll also learn to work with the I2C bus to add GPIO using the PCF8574 chip. And how to create PWM output for RC control using hardware timers. You'll be introduced to new concepts that are necessary to master the STM32, such as how to extend code with GCC overlays using an external Winbond W25Q32 flash chip. Your knowledge is tested at the end of each chapter with exercises. Upon completing this book, you'll be ready to work with any of the devices in the STM32 family. Beginning STM32 provides the professional, student, or hobbyist a way to learn about ARM without costing an arm!

ISBN: 9781484236246

Standard No.: 10.1007/978-1-4842-3624-6doiSubjects--Topical Terms:

563480
Programmable controllers.

LC Class. No.: TJ223.P76 / G399 2018

Dewey Class. No.: 629.895

Beginning STM32 = developing with FreeRTOS, libopencm3 and GCC /
LDR:02922nam a2200289 a 4500 001 926706
003 DE-He213
005 20181210110134.0
006 m d
007 cr nn 008maaau
008 190625s2018 cau s 0 eng d
020 $a 9781484236246 $q (electronic bk.)
020 $a 9781484236239 $q (paper)
024 7 $a 10.1007/978-1-4842-3624-6 $2 doi
035 $a 978-1-4842-3624-6
040 $a GP $c GP
041 0 $a eng
050 4 $a TJ223.P76 $b G399 2018
082 0 4 $a 629.895 $2 23
090 $a TJ223.P76 $b G285 2018
100 1 $a Gay, Warren. $3 1070234
245 1 0 $a Beginning STM32 $h [electronic resource] : $b developing with FreeRTOS, libopencm3 and GCC / $c by Warren Gay.
260 $a Berkeley, CA : $b Apress : $b Imprint: Apress, $c 2018.
300 $a xxi, 409 p. : $b ill., digital ; $c 24 cm.
505 0 $a Chapter 1 -- Introduction -- Chapter 2 -- Software Setup -- Chapter 3 -- Power up and Blink -- Chapter 4 -- GPIO -- Chapter 5 -- FreeRTOS -- Chapter 6 -- USART -- Chapter 7 -- USB Serial -- Chapter 8 -- SPI Flash -- Chapter 9 -- Code Overlays -- Chapter 10 -- Real Time Clock (RTC) -- Chapter 11 -- I2C -- Chapter 12 -- SPI OLED -- Chapter 13 -- OLED Using DMA -- Chapter 14 -- ADC -- Chapter 15 -- Clock Tree -- Chapter 16 -- PWM With Timer 2 -- Chapter 17 -- PWM Input with Timer 4 -- Chapter 18 -- CAN Bus -- Chapter 19 -- CAN Bus Software -- Chapter 20 -- New Projects -- 21 -- Troubleshooting -- 22 -- Appendix A Answers to Exercises -- 23 -- Appendix B.
520 $a Using FreeRTOS and libopencm3 instead of the Arduino software environment, this book will help you develop multi-tasking applications that go beyond Arduino norms. In addition to the usual peripherals found in the typical Arduino device, the STM32 device includes a USB controller, RTC (Real Time Clock), DMA (Direct Memory Access controller), CAN bus and more. Each chapter contains clear explanations of the STM32 hardware capabilities to help get you started with the device, including GPIO and several other ST Microelectronics peripherals like USB and CAN bus controller. You'll learn how to download and set up the libopencm3 + FreeRTOS development environment, using GCC. With everything set up, you'll leverage FreeRTOS to create tasks, queues, and mutexes. You'll also learn to work with the I2C bus to add GPIO using the PCF8574 chip. And how to create PWM output for RC control using hardware timers. You'll be introduced to new concepts that are necessary to master the STM32, such as how to extend code with GCC overlays using an external Winbond W25Q32 flash chip. Your knowledge is tested at the end of each chapter with exercises. Upon completing this book, you'll be ready to work with any of the devices in the STM32 family. Beginning STM32 provides the professional, student, or hobbyist a way to learn about ARM without costing an arm!
650 0 $a Programmable controllers. $3 563480
650 1 4 $a Computer Science. $3 593922
650 2 4 $a Hardware and Maker. $3 1114124
710 2 $a SpringerLink (Online service) $3 593884
773 0 $t Springer eBooks
856 4 0 $u http://dx.doi.org/10.1007/978-1-4842-3624-6
950 $a Professional and Applied Computing (Springer-12059)