國立虎尾科技大學 |

Metal matrix composites = wetting and infiltration /

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Metal matrix composites/ by Antonio Contreras Cuevas ... [et al.].
其他題名:	wetting and infiltration /
其他作者:	Cuevas, Antonio Contreras.
出版者:	Cham :Springer International Publishing : : 2018.,
面頁冊數:	xxii, 310 p. :ill., digital ; : 24 cm.;
Contained By:	Springer eBooks
標題:	Metallic composites. -
電子資源:	https://doi.org/10.1007/978-3-319-91854-9
ISBN:	9783319918549

Metal matrix composites = wetting and infiltration /
Metal matrix compositeswetting and infiltration /[electronic resource] :by Antonio Contreras Cuevas ... [et al.]. - Cham :Springer International Publishing :2018. - xxii, 310 p. :ill., digital ;24 cm.

Introduction -- Wettability -- Composites fabrication techniques -- Fabrication and characterization of composites -- Joining of composites -- Corrosion of composites -- Wear of composites -- Author index -- Subject index.

This book covers several aspects of the synthesis of composites by the pressureless infiltration technique. It describes the methods used to obtain green preforms, such as cold pressed and hot sintering, describing the heating time, load, and time required for pressing the preforms. Additionally, wettability phenomena, which is directly related on infiltration, is extensively described. Wettability process and interfacial reactions are analyzed in many ceramic-metal systems prior to fabricate the composites. A complete description of fabrication processes for Metal Matrix Composites is included. An extensive section on structural, chemical, and mechanical characterization of composites fabricated with aluminum and magnesium alloys as matrices reinforced with titanium carbide (TiC), aluminum nitride (AlN), silicon carbide (SiC) and alumina (Al2O3) is included. Relevant techniques for joining composites, such as welding and brazing are addressed. As well as issues pertaining to the corrosion and wear of composites are discussed as well. Corrosion behavior of some composites exposed to aqueous media was analyzed. Corrosion of composites using TiC and SiC like reinforcement and Al, Ni, and some Al-Cux, Al-Mgx and Al-Cu-Li alloys like matrix is discussed extensively. The structural characterization techniques addressed include: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), optical microscopy (OM), differential thermal analysis (DTA), high resolution transmission electron microscopy (HRTEM), and thermogravimetry analysis (TGA). Mechanical testing including hardness, elastic modulus, tension tests, and impact tests were used in the characterization of composites. Theoretical models for prediction of some mechanical properties are included too.

ISBN: 9783319918549

Standard No.: 10.1007/978-3-319-91854-9doiSubjects--Topical Terms:

639172
Metallic composites.

LC Class. No.: TA481 / .C848 2018

Dewey Class. No.: 620.16

Metal matrix composites = wetting and infiltration /
LDR:03038nam a2200325 a 4500 001 929522
003 DE-He213
005 20190321164725.0
006 m d
007 cr nn 008maaau
008 190626s2018 gw s 0 eng d
020 $a 9783319918549 $q (electronic bk.)
020 $a 9783319918532 $q (paper)
024 7 $a 10.1007/978-3-319-91854-9 $2 doi
035 $a 978-3-319-91854-9
040 $a GP $c GP
041 0 $a eng
050 4 $a TA481 $b .C848 2018
072 7 $a TDM $2 bicssc
072 7 $a TEC021000 $2 bisacsh
072 7 $a TDPM $2 thema
082 0 4 $a 620.16 $2 23
090 $a TA481 $b .C965 2018
245 0 0 $a Metal matrix composites $h [electronic resource] : $b wetting and infiltration / $c by Antonio Contreras Cuevas ... [et al.].
260 $a Cham : $c 2018. $b Springer International Publishing : $b Imprint: Springer,
300 $a xxii, 310 p. : $b ill., digital ; $c 24 cm.
505 0 $a Introduction -- Wettability -- Composites fabrication techniques -- Fabrication and characterization of composites -- Joining of composites -- Corrosion of composites -- Wear of composites -- Author index -- Subject index.
520 $a This book covers several aspects of the synthesis of composites by the pressureless infiltration technique. It describes the methods used to obtain green preforms, such as cold pressed and hot sintering, describing the heating time, load, and time required for pressing the preforms. Additionally, wettability phenomena, which is directly related on infiltration, is extensively described. Wettability process and interfacial reactions are analyzed in many ceramic-metal systems prior to fabricate the composites. A complete description of fabrication processes for Metal Matrix Composites is included. An extensive section on structural, chemical, and mechanical characterization of composites fabricated with aluminum and magnesium alloys as matrices reinforced with titanium carbide (TiC), aluminum nitride (AlN), silicon carbide (SiC) and alumina (Al2O3) is included. Relevant techniques for joining composites, such as welding and brazing are addressed. As well as issues pertaining to the corrosion and wear of composites are discussed as well. Corrosion behavior of some composites exposed to aqueous media was analyzed. Corrosion of composites using TiC and SiC like reinforcement and Al, Ni, and some Al-Cux, Al-Mgx and Al-Cu-Li alloys like matrix is discussed extensively. The structural characterization techniques addressed include: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), optical microscopy (OM), differential thermal analysis (DTA), high resolution transmission electron microscopy (HRTEM), and thermogravimetry analysis (TGA). Mechanical testing including hardness, elastic modulus, tension tests, and impact tests were used in the characterization of composites. Theoretical models for prediction of some mechanical properties are included too.
650 0 $a Metallic composites. $3 639172
650 1 4 $a Metallic Materials. $3 671028
650 2 4 $a Ceramics, Glass, Composites, Natural Materials. $3 1116204
650 2 4 $a Structural Materials. $3 677176
700 1 $a Cuevas, Antonio Contreras. $3 1210179
710 2 $a SpringerLink (Online service) $3 593884
773 0 $t Springer eBooks
856 4 0 $u https://doi.org/10.1007/978-3-319-91854-9
950 $a Chemistry and Materials Science (Springer-11644)