國立虎尾科技大學 |

Language: English

Back

高螺旋角銑刀於CFRP在不同輔助銑削環境切削性能之研究 = = Stud...

高子晉

高螺旋角銑刀於CFRP在不同輔助銑削環境切削性能之研究 = = Study on Cutting Performance for CFRP Composite by Using a High-Helix End Mill under Different Assisted Milling Environments /

Record Type:	Language materials, printed : Monograph/item
Title/Author:	高螺旋角銑刀於CFRP在不同輔助銑削環境切削性能之研究 =/ 高子晉.
Reminder of title:	Study on Cutting Performance for CFRP Composite by Using a High-Helix End Mill under Different Assisted Milling Environments /
remainder title:	Study on Cutting Performance for CFRP Composite by Using a High-Helix End Mill under Different Assisted Milling Environments.
Author:	高子晉
Published:	雲林縣 :國立虎尾科技大學 , : 民108.07.,
Description:	[8], 108 面 :圖, 表 ; : 30公分.;
Notes:	指導教授: 林盛勇.
Subject:	Machining failure mechanisms. -
Online resource:	電子資源

高螺旋角銑刀於CFRP在不同輔助銑削環境切削性能之研究 = = Study on Cutting Performance for CFRP Composite by Using a High-Helix End Mill under Different Assisted Milling Environments /
高子晉

高螺旋角銑刀於CFRP在不同輔助銑削環境切削性能之研究 =Study on Cutting Performance for CFRP Composite by Using a High-Helix End Mill under Different Assisted Milling Environments /Study on Cutting Performance for CFRP Composite by Using a High-Helix End Mill under Different Assisted Milling Environments.高子晉. - 初版. - 雲林縣 :國立虎尾科技大學 ,民108.07. - [8], 108 面 :圖, 表 ;30公分.

指導教授: 林盛勇.

碩士論文--國立虎尾科技大學機械與電腦輔助工程系碩士班.

含參考書目.

(平裝).Subjects--Topical Terms:

1219355
Machining failure mechanisms.

高螺旋角銑刀於CFRP在不同輔助銑削環境切削性能之研究 = = Study on Cutting Performance for CFRP Composite by Using a High-Helix End Mill under Different Assisted Milling Environments /
LDR:01018cam a2200217 i 4500 001 932249
008 191014s2019 ch ak frm 000 0 chi d
035 $a (THES)107NYPI0689018
040 $a NFU $b chi $c NFU $e CCR
041 0 # $a chi $b chi $b eng
084 $a 008.120M $b 0011 108 $2 ncsclt
100 1 $a 高子晉 $3 1214594
245 1 0 $a 高螺旋角銑刀於CFRP在不同輔助銑削環境切削性能之研究 = $b Study on Cutting Performance for CFRP Composite by Using a High-Helix End Mill under Different Assisted Milling Environments / $c 高子晉.
246 1 1 $a Study on Cutting Performance for CFRP Composite by Using a High-Helix End Mill under Different Assisted Milling Environments.
250 $a 初版.
260 # $a 雲林縣 : $b 國立虎尾科技大學 , $c 民108.07.
300 $a [8], 108 面 : $b 圖, 表 ; $c 30公分.
500 $a 指導教授: 林盛勇.
500 $a 學年度: 107.
502 $a 碩士論文--國立虎尾科技大學機械與電腦輔助工程系碩士班.
504 $a 含參考書目.
563 $a (平裝).
650 # 4 $a Machining failure mechanisms. $3 1219355
650 # 4 $a High helix angle cutting-tool. $3 1219354
650 # 4 $a Chilled air assisted. $3 1219353
650 # 4 $a Biaxial ultrasonically assisted. $3 1219352
650 # 4 $a CFRP. $3 1219351
650 # 4 $a 加工缺陷. $3 1219350
650 # 4 $a 高螺旋角銑刀. $3 1219349
650 # 4 $a 冷風輔助. $3 1128613
650 # 4 $a 超音波輔助. $3 1049621
650 # 4 $a 碳纖維複合材. $3 1219348
856 7 # $u http://handle.ncl.edu.tw/11296/7f5rev $z 電子資源 $2 http