國立虎尾科技大學 |

A Model for Condensation Heat Transfer in Hydrophobic-Hydrophilic Surfaces.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	A Model for Condensation Heat Transfer in Hydrophobic-Hydrophilic Surfaces./
作者:	Alhashem, Abdulwahab E.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2019,
面頁冊數:	119 p.
附註:	Source: Dissertations Abstracts International, Volume: 81-05, Section: B.
Contained By:	Dissertations Abstracts International81-05B.
標題:	Mechanical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10975088
ISBN:	9781687951830

A Model for Condensation Heat Transfer in Hydrophobic-Hydrophilic Surfaces.
Alhashem, Abdulwahab E.

A Model for Condensation Heat Transfer in Hydrophobic-Hydrophilic Surfaces. - Ann Arbor : ProQuest Dissertations & Theses, 2019 - 119 p.

Source: Dissertations Abstracts International, Volume: 81-05, Section: B.

Thesis (Ph.D.)--University of South Carolina, 2019.

This item must not be sold to any third party vendors.

The primary focus of this research is to provide a validated model for a comprehensive understanding of hydrophobic-hydrophilic condensation on patterned-hybrid surface. Establishing the model requires the modeling of fully dropwise condensation (DWC) before applying modifications to evaluate heat transfer performance of patterned-hybrid condensation surface.The model for fully DWC consists of defining expressions for heat transfer through a single drop, maximum radius of the drop and drop-size distribution which all are primarily based on the work in the literature. In this work the author utilized a proposed modified version of the simulation for drop-size distribution for fully DWC, the proposed drop-size distribution is capable of defining population density as a function of the contact angle, hydrophobic region width and hydrophilic region width. The new expression is derived from simulating the growth process of drops by direct condensation and coalescence for various hydrophobic and hydrophilic region widths as well as for various contact angles. Evaluating the overall heat transfer performance for the proposed model involves modeling of hydrophobic and hydrophilic regions in addition to the interaction between the regions due to merging drops to the hydrophilic region. Results for fully dropwise condensation shows that heat flux increases with total temperature difference. In addition, an optimum contact angle that corresponds to the maximum heat flux exists at approximately 132 degrees. In this study a parametric analysis is performed on hydrophobic-hydrophilic hybrid condensation surface that shows the influence of hydrophobic region width, hydrophobic contact angle, hydrophilic region width and total temperature difference. Results show that the integrated hydrophobic-hydrophilic surface performs better and has the advantage over fully DWC for certain cases. In general, decreasing hydrophilic region width shows a better enhancement factor, which is defined as the ratio of hybrid heat flux to that for fully DWC. Furthermore, enhancement factor of greater than unity exists when hydrophobic region contact angle is less than approximately 120 degrees, depending on hydrophilic region width. In addition, with respect to hydrophobic region width, an optimum condition exists for given total temperature difference and hydrophilic region width. Overall, hybrid surface heat flux there is greater enhanced for relatively lower temperature difference, lower hydrophobic contact angle and lower hydrophilic region width at the optimized hydrophobic region width.The proposed model utilizes two correlations, derived from simulation work, to define a modified drop-size distribution with respect to drop-maximum-radius-to-region-width ratio. When the ratio is less than unity, it implies that sweeping and merging of drops are the main mechanism for surface renewal. For ratio equal to unity, surface renewal is achieved by merging only. The model accepts a range for hydrophobic and hydrophilic region width and contact angle for total temperature difference range as inputs. It provides results for hybrid surface heat flux and evaluates heat transfer performance for input data relative to fully dropwise condensation surface. The proposed model can be used to design optimum condenser surfaces that can be used in a variety of industrial applications, such as condensers in Rankine cycle power plant, an condensers for vapor-compression refrigeration cycle.

ISBN: 9781687951830Subjects--Topical Terms:

557493
Mechanical engineering.
Subjects--Index Terms:

Condensation Heat Transfer model

A Model for Condensation Heat Transfer in Hydrophobic-Hydrophilic Surfaces.
LDR:04818nam a2200409 4500 001 951758
005 20200821052148.5
008 200914s2019 ||||||||||||||||| ||eng d
020 $a 9781687951830
035 $a (MiAaPQ)AAI10975088
035 $a AAI10975088
040 $a MiAaPQ $c MiAaPQ
100 1 $a Alhashem, Abdulwahab E. $3 1241223
245 1 0 $a A Model for Condensation Heat Transfer in Hydrophobic-Hydrophilic Surfaces.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2019
300 $a 119 p.
500 $a Source: Dissertations Abstracts International, Volume: 81-05, Section: B.
500 $a Advisor: Khan, Jamil.
502 $a Thesis (Ph.D.)--University of South Carolina, 2019.
506 $a This item must not be sold to any third party vendors.
520 $a The primary focus of this research is to provide a validated model for a comprehensive understanding of hydrophobic-hydrophilic condensation on patterned-hybrid surface. Establishing the model requires the modeling of fully dropwise condensation (DWC) before applying modifications to evaluate heat transfer performance of patterned-hybrid condensation surface.The model for fully DWC consists of defining expressions for heat transfer through a single drop, maximum radius of the drop and drop-size distribution which all are primarily based on the work in the literature. In this work the author utilized a proposed modified version of the simulation for drop-size distribution for fully DWC, the proposed drop-size distribution is capable of defining population density as a function of the contact angle, hydrophobic region width and hydrophilic region width. The new expression is derived from simulating the growth process of drops by direct condensation and coalescence for various hydrophobic and hydrophilic region widths as well as for various contact angles. Evaluating the overall heat transfer performance for the proposed model involves modeling of hydrophobic and hydrophilic regions in addition to the interaction between the regions due to merging drops to the hydrophilic region. Results for fully dropwise condensation shows that heat flux increases with total temperature difference. In addition, an optimum contact angle that corresponds to the maximum heat flux exists at approximately 132 degrees. In this study a parametric analysis is performed on hydrophobic-hydrophilic hybrid condensation surface that shows the influence of hydrophobic region width, hydrophobic contact angle, hydrophilic region width and total temperature difference. Results show that the integrated hydrophobic-hydrophilic surface performs better and has the advantage over fully DWC for certain cases. In general, decreasing hydrophilic region width shows a better enhancement factor, which is defined as the ratio of hybrid heat flux to that for fully DWC. Furthermore, enhancement factor of greater than unity exists when hydrophobic region contact angle is less than approximately 120 degrees, depending on hydrophilic region width. In addition, with respect to hydrophobic region width, an optimum condition exists for given total temperature difference and hydrophilic region width. Overall, hybrid surface heat flux there is greater enhanced for relatively lower temperature difference, lower hydrophobic contact angle and lower hydrophilic region width at the optimized hydrophobic region width.The proposed model utilizes two correlations, derived from simulation work, to define a modified drop-size distribution with respect to drop-maximum-radius-to-region-width ratio. When the ratio is less than unity, it implies that sweeping and merging of drops are the main mechanism for surface renewal. For ratio equal to unity, surface renewal is achieved by merging only. The model accepts a range for hydrophobic and hydrophilic region width and contact angle for total temperature difference range as inputs. It provides results for hybrid surface heat flux and evaluates heat transfer performance for input data relative to fully dropwise condensation surface. The proposed model can be used to design optimum condenser surfaces that can be used in a variety of industrial applications, such as condensers in Rankine cycle power plant, an condensers for vapor-compression refrigeration cycle.
590 $a School code: 0202.
650 4 $a Mechanical engineering. $3 557493
650 4 $a Thermodynamics. $3 596513
650 4 $a Fluid mechanics. $3 555551
650 4 $a Chemical engineering. $3 555952
653 $a Condensation Heat Transfer model
653 $a Hydrophobic hydrophilic surface
653 $a Dropwise condensation
653 $a Heat transfer performance
653 $a Patterned-hybrid condensation surface
653 $a Maximum heat flux
653 $a Surface renewal
690 $a 0548
690 $a 0542
690 $a 0204
690 $a 0348
710 2 $a University of South Carolina. $b Mechanical Engineering. $3 845621
773 0 $t Dissertations Abstracts International $g 81-05B.
790 $a 0202
791 $a Ph.D.
792 $a 2019
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10975088