國立虎尾科技大學 |

Finite Element Electromagnetic (EM) Analyses of Induction Heating of Thermoplastic Composites.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Finite Element Electromagnetic (EM) Analyses of Induction Heating of Thermoplastic Composites./
作者:	Patel, Ankit.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2019,
面頁冊數:	104 p.
附註:	Source: Masters Abstracts International, Volume: 81-02.
Contained By:	Masters Abstracts International81-02.
標題:	Electrical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10980553
ISBN:	9781085586368

Finite Element Electromagnetic (EM) Analyses of Induction Heating of Thermoplastic Composites.
Patel, Ankit.

Finite Element Electromagnetic (EM) Analyses of Induction Heating of Thermoplastic Composites. - Ann Arbor : ProQuest Dissertations & Theses, 2019 - 104 p.

Source: Masters Abstracts International, Volume: 81-02.

Thesis (M.S.)--University of South Carolina, 2019.

This item must not be sold to any third party vendors.

Thermoplastic composites are in great demand for current and future manufacturing of aircraft and automotive industries. Induction heating and welding of thermoplastic composite laminates is of great significance. The non-contact method of heating and welding is being adopted in aircraft parts, engine parts, and turbine parts manufacturing among many other things. This thesis performs simulations and analyses of Electromagnetic (EM) induction heating of thermoplastic composites materials.The induction heating and welding of thermoplastic composites in the presence of a susceptor alloy (called Monel) consisting of 67% nickel and 27% copper is studied using a Finite Element Analysis (FEA) software. A primary current carrying coil was excited using 500A of current at 292 kHz frequency, which exposed the Monel susceptor underneath it. The EM fields created by the primary coil caused induced current in the Monel mesh, which caused losses. Temperature rise in the material is synonymous to the losses in the material. The I2R losses in the Monel material was used as the basis to calculate the temperature rise in the material. Simulation results clearly show the heating patterns on the Monel mesh, less in the center and high on the edges. Location-based temperature increases due to I2R losses are calculated which show significant heating and welding potentials. The result obtained from the simulation was validated using an experiment. Measured temperature increase showed the reading of 40 and 43.9 degrees respectively (thermocouple and IR camera). These numbers compare favorably with the simulated temperature increase of 38.97 degrees C.Also, the induction heating of Carbon fiber reinforced composites (CFRC) were simulated and studied. The results obtained from the simulation explain that fiber orientation and the presence of resin are two critical parameters that affect the output e.g. the solid loss. Due to the challenges in the high aspect ratio of the models, i.e. very small fiber diameters and many fibers within a very small dimension only smaller sized models were simulated. Furthermore, instead of a circular cross-section a polyhedron cross-section for the fiber model was considered to successfully complete the simulations. It was found that simulation models containing fibers oriented in 0 and 90 orientation yielded higher solid loss than fibers oriented in the same direction. It was observed that for fibers with resin present in between them yielded far greater solid loss compared to no-resin cases, especially for very small separation distances between fibers. Especially, for the 0, 90 orientation of fibers and in the presence of resins solid loss was nearly 200 times that for fibers with 0,0 orientation and that were at short distance from one another.

ISBN: 9781085586368Subjects--Topical Terms:

596380
Electrical engineering.
Subjects--Index Terms:

Thermoplastic composites

Finite Element Electromagnetic (EM) Analyses of Induction Heating of Thermoplastic Composites.
LDR:03892nam a2200325 4500 001 951764
005 20200821052150.5
008 200914s2019 ||||||||||||||||| ||eng d
020 $a 9781085586368
035 $a (MiAaPQ)AAI10980553
035 $a AAI10980553
040 $a MiAaPQ $c MiAaPQ
100 1 $a Patel, Ankit. $3 1241228
245 1 0 $a Finite Element Electromagnetic (EM) Analyses of Induction Heating of Thermoplastic Composites.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2019
300 $a 104 p.
500 $a Source: Masters Abstracts International, Volume: 81-02.
500 $a Advisor: Ali, Mohammod.
502 $a Thesis (M.S.)--University of South Carolina, 2019.
506 $a This item must not be sold to any third party vendors.
520 $a Thermoplastic composites are in great demand for current and future manufacturing of aircraft and automotive industries. Induction heating and welding of thermoplastic composite laminates is of great significance. The non-contact method of heating and welding is being adopted in aircraft parts, engine parts, and turbine parts manufacturing among many other things. This thesis performs simulations and analyses of Electromagnetic (EM) induction heating of thermoplastic composites materials.The induction heating and welding of thermoplastic composites in the presence of a susceptor alloy (called Monel) consisting of 67% nickel and 27% copper is studied using a Finite Element Analysis (FEA) software. A primary current carrying coil was excited using 500A of current at 292 kHz frequency, which exposed the Monel susceptor underneath it. The EM fields created by the primary coil caused induced current in the Monel mesh, which caused losses. Temperature rise in the material is synonymous to the losses in the material. The I2R losses in the Monel material was used as the basis to calculate the temperature rise in the material. Simulation results clearly show the heating patterns on the Monel mesh, less in the center and high on the edges. Location-based temperature increases due to I2R losses are calculated which show significant heating and welding potentials. The result obtained from the simulation was validated using an experiment. Measured temperature increase showed the reading of 40 and 43.9 degrees respectively (thermocouple and IR camera). These numbers compare favorably with the simulated temperature increase of 38.97 degrees C.Also, the induction heating of Carbon fiber reinforced composites (CFRC) were simulated and studied. The results obtained from the simulation explain that fiber orientation and the presence of resin are two critical parameters that affect the output e.g. the solid loss. Due to the challenges in the high aspect ratio of the models, i.e. very small fiber diameters and many fibers within a very small dimension only smaller sized models were simulated. Furthermore, instead of a circular cross-section a polyhedron cross-section for the fiber model was considered to successfully complete the simulations. It was found that simulation models containing fibers oriented in 0 and 90 orientation yielded higher solid loss than fibers oriented in the same direction. It was observed that for fibers with resin present in between them yielded far greater solid loss compared to no-resin cases, especially for very small separation distances between fibers. Especially, for the 0, 90 orientation of fibers and in the presence of resins solid loss was nearly 200 times that for fibers with 0,0 orientation and that were at short distance from one another.
590 $a School code: 0202.
650 4 $a Electrical engineering. $3 596380
653 $a Thermoplastic composites
653 $a Induction heating and welding
653 $a Electromagnetic induction heating
690 $a 0544
710 2 $a University of South Carolina. $b Electrical Engineering. $3 1191473
773 0 $t Masters Abstracts International $g 81-02.
790 $a 0202
791 $a M.S.
792 $a 2019
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10980553