國立虎尾科技大學 |

Low-Cost Method of Estimating Vehicle Sideslip and Tire Cornering Stiffness Using Global Positioning and Inertial Measurement.

Record Type:	Language materials, printed : Monograph/item
Title/Author:	Low-Cost Method of Estimating Vehicle Sideslip and Tire Cornering Stiffness Using Global Positioning and Inertial Measurement./
Author:	Forte, Livio, III.
Published:	Ann Arbor : ProQuest Dissertations & Theses, : 2019,
Description:	122 p.
Notes:	Source: Masters Abstracts International, Volume: 80-12.
Contained By:	Masters Abstracts International80-12.
Subject:	Automotive engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13885598
ISBN:	9781392271018

Low-Cost Method of Estimating Vehicle Sideslip and Tire Cornering Stiffness Using Global Positioning and Inertial Measurement.
Forte, Livio, III.

Low-Cost Method of Estimating Vehicle Sideslip and Tire Cornering Stiffness Using Global Positioning and Inertial Measurement. - Ann Arbor : ProQuest Dissertations & Theses, 2019 - 122 p.

Source: Masters Abstracts International, Volume: 80-12.

Thesis (M.S.)--State University of New York at Buffalo, 2019.

This item must not be sold to any third party vendors.

In this study a low-cost method of estimating the linear tire model for a road vehicle is developed, which can be used to make quantitative decisions for tire selection and vehicle modification. As a traditional tire model requires measuring the forces and moments of the tire, for a range of slip and camber angles and normal force, on a rotating belt assembly.A data acquisition (DAQ) system using consumer grade global position system (GPS) and inertial measurement unit (IMU) is designed and used to measure and record the vehicles response. The single-antenna GPS measures the vehicles track angle and speed, and the IMU measures the vehicles lateral and longitudinal acceleration and yaw rate.The GPS measurements are sampled at 5 Hz and the IMU measurements are sampled at 100 Hz. The measured data from the GPS is aligned with the IMU measurements using the time stamp. The measured IMU data is smoothed using a moving mean filter and the GPS data is splined to match the sampling rate of the IMU measurements. The processed data is then used to estimate the vehicles yaw angle, and lateral and longitudinal velocity using a cascading kinematic Kalman filter (KKF).The kinematic equations for the KKF are derived from the planar bicycle model. Using the estimated results from the KKF the linear tire model is calculated for a bicycle model. The approach was validated by modifying vehicle parameters in a simulation and on a test vehicle.Two main conclusions have been made in this study: (1) the estimated tire model can be used to quantify changes in the vehicle response due to changes in the vehicle and tire parameters; (2) the estimated results are repeatable and predict the true tire model.

ISBN: 9781392271018Subjects--Topical Terms:

1104081
Automotive engineering.
Subjects--Index Terms:

Cornering stiffness

Low-Cost Method of Estimating Vehicle Sideslip and Tire Cornering Stiffness Using Global Positioning and Inertial Measurement.
LDR:02940nam a2200373 4500 001 951841
005 20200821052206.5
008 200914s2019 ||||||||||||||||| ||eng d
020 $a 9781392271018
035 $a (MiAaPQ)AAI13885598
035 $a (MiAaPQ)buffalo:16450
035 $a AAI13885598
040 $a MiAaPQ $c MiAaPQ
100 1 $a Forte, Livio, III. $3 1241330
245 1 0 $a Low-Cost Method of Estimating Vehicle Sideslip and Tire Cornering Stiffness Using Global Positioning and Inertial Measurement.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2019
300 $a 122 p.
500 $a Source: Masters Abstracts International, Volume: 80-12.
500 $a Publisher info.: Dissertation/Thesis.
500 $a Advisor: Armstrong, Jason.
502 $a Thesis (M.S.)--State University of New York at Buffalo, 2019.
506 $a This item must not be sold to any third party vendors.
520 $a In this study a low-cost method of estimating the linear tire model for a road vehicle is developed, which can be used to make quantitative decisions for tire selection and vehicle modification. As a traditional tire model requires measuring the forces and moments of the tire, for a range of slip and camber angles and normal force, on a rotating belt assembly.A data acquisition (DAQ) system using consumer grade global position system (GPS) and inertial measurement unit (IMU) is designed and used to measure and record the vehicles response. The single-antenna GPS measures the vehicles track angle and speed, and the IMU measures the vehicles lateral and longitudinal acceleration and yaw rate.The GPS measurements are sampled at 5 Hz and the IMU measurements are sampled at 100 Hz. The measured data from the GPS is aligned with the IMU measurements using the time stamp. The measured IMU data is smoothed using a moving mean filter and the GPS data is splined to match the sampling rate of the IMU measurements. The processed data is then used to estimate the vehicles yaw angle, and lateral and longitudinal velocity using a cascading kinematic Kalman filter (KKF).The kinematic equations for the KKF are derived from the planar bicycle model. Using the estimated results from the KKF the linear tire model is calculated for a bicycle model. The approach was validated by modifying vehicle parameters in a simulation and on a test vehicle.Two main conclusions have been made in this study: (1) the estimated tire model can be used to quantify changes in the vehicle response due to changes in the vehicle and tire parameters; (2) the estimated results are repeatable and predict the true tire model.
590 $a School code: 0656.
650 4 $a Automotive engineering. $3 1104081
650 4 $a Mechanical engineering. $3 557493
653 $a Cornering stiffness
653 $a Sideslip
653 $a Tire cornering
653 $a Vehicle motion
690 $a 0540
690 $a 0548
710 2 $a State University of New York at Buffalo. $b Mechanical and Aerospace Engineering. $3 845600
773 0 $t Masters Abstracts International $g 80-12.
790 $a 0656
791 $a M.S.
792 $a 2019
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13885598