語系:
繁體中文
English
說明(常見問題)
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Handbuch Umformtechnik = Grundlagen,...
~
Doege, Eckart.
Handbuch Umformtechnik = Grundlagen, Technologien, Maschinen /
紀錄類型:
書目-語言資料,印刷品 : Monograph/item
正題名/作者:
Handbuch Umformtechnik/ von Eckart Doege, Bernd-Arno Behrens.
其他題名:
Grundlagen, Technologien, Maschinen /
作者:
Doege, Eckart.
其他作者:
Behrens, Bernd-Arno.
面頁冊數:
XIII, 914 S. 943 Abb.online resource. :
Contained By:
Springer Nature eBook
標題:
Manufactures. -
電子資源:
https://doi.org/10.1007/978-3-662-43891-6
ISBN:
9783662438916
Handbuch Umformtechnik = Grundlagen, Technologien, Maschinen /
Doege, Eckart.
Handbuch Umformtechnik
Grundlagen, Technologien, Maschinen /[electronic resource] :von Eckart Doege, Bernd-Arno Behrens. - 3rd ed. 2016. - XIII, 914 S. 943 Abb.online resource. - VDI-Buch,2512-5281. - VDI-Buch,.
Das Handbuch Umformtechnik überzeugt durch die kompakte und übersichtliche Darstellung grundlegenden Wissens und komplexer Inhalte für die wissenschaftliche Arbeit und die industrielle Praxis. Aktuelle Forschungsergebnisse sowie Erfahrungen aus über 50 Jahren universitärer Forschung und Lehre machen das Buch zu einem hilfreichen Nachschlagewerk für den Umformtechniker. Es erscheint jetzt in der dritten Auflage. Der Inhalt Nach einer ausführlichen Darstellung der plastomechanischen und tribologischen Grundlagen widmen sich die Autoren der Blechumformung, der Massivumformung sowie den Umformmaschinen in jeweils einem eigenständigen Kapitel. Dabei werden u. a. aktuelle Technologien und Verfahren sowie Pressenantriebe vorgestellt. Zahlreiche Grafiken und Diagramme veranschaulichen die Inhalte. Die Zielgruppen Das Buch hilft Studierenden, das in den Vorlesungen vermittelte Wissen zu vertiefen und zu festigen. Darüber hinaus dient es Ingenieuren und Technikern sowie Wissenschaftlern im praktischen Alltag als übersichtliches Nachschlagewerk. Die Autoren/Herausgeber Prof. Dr.-Ing. Eckart Doege (geb. 18. Februar 1936; † 8. April 2004) war Professor und Leiter des Instituts für Umformtechnik und Umformmaschinen (IFUM) der Leibniz Universität Hannover Prof. Dr.-Ing. Bernd-Arno Behrens (geb. 7. Dezember 1964) studierte Maschinenbau an der Universität Hannover. Nach seiner Promotion 1997 am Institut für Umformtechnik und Umformmaschinen (IFUM) in Hannover wechselte er in die Industrie zur Salzgitter AG und war dort in einer leitenden Position tätig. Im Oktober 2003 wurde er an die Universität Hannover berufen und übernahm die Leitung des IFUM. Im Nebenamt ist Professor Behrens Vorstandssprecher der Materialprüfanstalt für Werkstoffe und Produktionstechnik und geschäftsführender Gesellschafter des Institutes für Integrierte Produktion Hannover.
ISBN: 9783662438916
Standard No.: 10.1007/978-3-662-43891-6doiSubjects--Topical Terms:
680602
Manufactures.
LC Class. No.: TS1-2301
Dewey Class. No.: 670
Handbuch Umformtechnik = Grundlagen, Technologien, Maschinen /
LDR
:03190nam a22003855i 4500
001
971825
003
DE-He213
005
20200711083658.0
007
cr nn 008mamaa
008
201211s2016 gw | s |||| 0|ger d
020
$a
9783662438916
$9
978-3-662-43891-6
024
7
$a
10.1007/978-3-662-43891-6
$2
doi
035
$a
978-3-662-43891-6
050
4
$a
TS1-2301
050
4
$a
TS1-2301
072
7
$a
TGP
$2
bicssc
072
7
$a
TEC020000
$2
bisacsh
072
7
$a
TGP
$2
thema
072
7
$a
TGP
$2
thema
082
0 4
$a
670
$2
23
082
0 4
$a
670
$2
23
100
1
$a
Doege, Eckart.
$e
author.
$4
aut
$4
http://id.loc.gov/vocabulary/relators/aut
$3
1267108
245
1 0
$a
Handbuch Umformtechnik
$h
[electronic resource] :
$b
Grundlagen, Technologien, Maschinen /
$c
von Eckart Doege, Bernd-Arno Behrens.
250
$a
3rd ed. 2016.
264
1
$a
Berlin, Heidelberg :
$b
Springer Berlin Heidelberg :
$b
Imprint: Springer Vieweg,
$c
2016.
300
$a
XIII, 914 S. 943 Abb.
$b
online resource.
336
$a
text
$b
txt
$2
rdacontent
337
$a
computer
$b
c
$2
rdamedia
338
$a
online resource
$b
cr
$2
rdacarrier
347
$a
text file
$b
PDF
$2
rda
490
1
$a
VDI-Buch,
$x
2512-5281
520
$a
Das Handbuch Umformtechnik überzeugt durch die kompakte und übersichtliche Darstellung grundlegenden Wissens und komplexer Inhalte für die wissenschaftliche Arbeit und die industrielle Praxis. Aktuelle Forschungsergebnisse sowie Erfahrungen aus über 50 Jahren universitärer Forschung und Lehre machen das Buch zu einem hilfreichen Nachschlagewerk für den Umformtechniker. Es erscheint jetzt in der dritten Auflage. Der Inhalt Nach einer ausführlichen Darstellung der plastomechanischen und tribologischen Grundlagen widmen sich die Autoren der Blechumformung, der Massivumformung sowie den Umformmaschinen in jeweils einem eigenständigen Kapitel. Dabei werden u. a. aktuelle Technologien und Verfahren sowie Pressenantriebe vorgestellt. Zahlreiche Grafiken und Diagramme veranschaulichen die Inhalte. Die Zielgruppen Das Buch hilft Studierenden, das in den Vorlesungen vermittelte Wissen zu vertiefen und zu festigen. Darüber hinaus dient es Ingenieuren und Technikern sowie Wissenschaftlern im praktischen Alltag als übersichtliches Nachschlagewerk. Die Autoren/Herausgeber Prof. Dr.-Ing. Eckart Doege (geb. 18. Februar 1936; † 8. April 2004) war Professor und Leiter des Instituts für Umformtechnik und Umformmaschinen (IFUM) der Leibniz Universität Hannover Prof. Dr.-Ing. Bernd-Arno Behrens (geb. 7. Dezember 1964) studierte Maschinenbau an der Universität Hannover. Nach seiner Promotion 1997 am Institut für Umformtechnik und Umformmaschinen (IFUM) in Hannover wechselte er in die Industrie zur Salzgitter AG und war dort in einer leitenden Position tätig. Im Oktober 2003 wurde er an die Universität Hannover berufen und übernahm die Leitung des IFUM. Im Nebenamt ist Professor Behrens Vorstandssprecher der Materialprüfanstalt für Werkstoffe und Produktionstechnik und geschäftsführender Gesellschafter des Institutes für Integrierte Produktion Hannover.
650
0
$a
Manufactures.
$3
680602
650
1 4
$a
Manufacturing, Machines, Tools, Processes.
$3
1226012
700
1
$a
Behrens, Bernd-Arno.
$e
author.
$4
aut
$4
http://id.loc.gov/vocabulary/relators/aut
$3
1267109
710
2
$a
SpringerLink (Online service)
$3
593884
773
0
$t
Springer Nature eBook
776
0 8
$i
Printed edition:
$z
9783662438909
830
0
$a
VDI-Buch,
$x
2512-5281
$3
1254033
856
4 0
$u
https://doi.org/10.1007/978-3-662-43891-6
912
$a
ZDB-2-STI
950
$a
Computer Science and Engineering (German Language) (SpringerNature-11774)
筆 0 讀者評論
多媒體
評論
新增評論
分享你的心得
Export
取書館別
處理中
...
變更密碼[密碼必須為2種組合(英文和數字)及長度為10碼以上]
登入