語系:
繁體中文
English
說明(常見問題)
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Millimeter-Wave Low Noise Amplifiers
~
Sinha, Saurabh.
Millimeter-Wave Low Noise Amplifiers
紀錄類型:
書目-語言資料,印刷品 : Monograph/item
正題名/作者:
Millimeter-Wave Low Noise Amplifiers/ by Mladen Božanić, Saurabh Sinha.
作者:
Božanić, Mladen.
其他作者:
Sinha, Saurabh.
面頁冊數:
XVIII, 334 p. 264 illus., 46 illus. in color.online resource. :
Contained By:
Springer Nature eBook
標題:
Electronic circuits. -
電子資源:
https://doi.org/10.1007/978-3-319-69020-9
ISBN:
9783319690209
Millimeter-Wave Low Noise Amplifiers
Božanić, Mladen.
Millimeter-Wave Low Noise Amplifiers
[electronic resource] /by Mladen Božanić, Saurabh Sinha. - 1st ed. 2018. - XVIII, 334 p. 264 illus., 46 illus. in color.online resource. - Signals and Communication Technology,1860-4862. - Signals and Communication Technology,.
Introduction and Research Impact -- Specification-Governed Telecommunication and High-Frequency-Electronics Aspects for Low-Noise Amplifier Research -- Technologies for Low-Noise Amplifiers in the Millimeter-Wave Regime -- Passives for Low-Noise Amplifiers in the Millimeter-Wave Regime -- General Low-Noise Amplifiers -- Broadband Low-Noise Amplifiers -- State-of-the-Art Low Noise Amplifiers in the Millimeter-Wave Regime -- Advanced Low-Noise Amplifier Optimization Topics -- Low-Noise Amplifier Optimization via Electronic Design Automation -- Evaluation of the Hypothesis and Research Questions, Final Remarks and Future Research.
This book examines the challenges of low-noise amplifier (LNA) research and design in the millimeter-wave regime by dissecting the common LNA configurations and typical specifications into parts, which are then optimized separately over several chapters to suggest improvements in the current designs. Current trends towards increased wireless connectivity and the need to stay connected everywhere and all the time, call for extremely high data rates. Most of the wireless networks operate in frequency bands measured in low gigahertz. Typically, this is done through channels with moderate bandwidth. To keep up with the trends for increased data transmission rates, new and innovative ideas are needed. One of the areas of investigation is the transmission in millimeter-wave regime, ranging from 30 GHz to 300 GHz, where there is an abundance of bandwidth. The low-noise amplifier (LNA) is the first component that appears in the front ends of most microwave and millimeter-wave receivers after an antenna. The performance of a millimeter-wave receiver is therefore largely dependent on the performance of the LNA that is used. Primarily, the LNA is tasked with amplifying a signal while introducing as little noise into the signal as possible. This is a necessity, because the signal received by the antenna is already submerged in noise, thus the signal, before it can be processed, needs to be amplified with the smallest possible amount of additional noise introduced in this process. This is even more so true, due to the limitation of the wave propagation in millimeter-wave regime, where there is a trade-off between data-rate, range and power.
ISBN: 9783319690209
Standard No.: 10.1007/978-3-319-69020-9doiSubjects--Topical Terms:
563332
Electronic circuits.
LC Class. No.: TK7888.4
Dewey Class. No.: 621.3815
Millimeter-Wave Low Noise Amplifiers
LDR
:03692nam a22004095i 4500
001
992399
003
DE-He213
005
20201221190008.0
007
cr nn 008mamaa
008
201225s2018 gw | s |||| 0|eng d
020
$a
9783319690209
$9
978-3-319-69020-9
024
7
$a
10.1007/978-3-319-69020-9
$2
doi
035
$a
978-3-319-69020-9
050
4
$a
TK7888.4
072
7
$a
TJFC
$2
bicssc
072
7
$a
TEC008010
$2
bisacsh
072
7
$a
TJFC
$2
thema
082
0 4
$a
621.3815
$2
23
100
1
$a
Božanić, Mladen.
$e
author.
$4
aut
$4
http://id.loc.gov/vocabulary/relators/aut
$3
1273934
245
1 0
$a
Millimeter-Wave Low Noise Amplifiers
$h
[electronic resource] /
$c
by Mladen Božanić, Saurabh Sinha.
250
$a
1st ed. 2018.
264
1
$a
Cham :
$b
Springer International Publishing :
$b
Imprint: Springer,
$c
2018.
300
$a
XVIII, 334 p. 264 illus., 46 illus. in color.
$b
online resource.
336
$a
text
$b
txt
$2
rdacontent
337
$a
computer
$b
c
$2
rdamedia
338
$a
online resource
$b
cr
$2
rdacarrier
347
$a
text file
$b
PDF
$2
rda
490
1
$a
Signals and Communication Technology,
$x
1860-4862
505
0
$a
Introduction and Research Impact -- Specification-Governed Telecommunication and High-Frequency-Electronics Aspects for Low-Noise Amplifier Research -- Technologies for Low-Noise Amplifiers in the Millimeter-Wave Regime -- Passives for Low-Noise Amplifiers in the Millimeter-Wave Regime -- General Low-Noise Amplifiers -- Broadband Low-Noise Amplifiers -- State-of-the-Art Low Noise Amplifiers in the Millimeter-Wave Regime -- Advanced Low-Noise Amplifier Optimization Topics -- Low-Noise Amplifier Optimization via Electronic Design Automation -- Evaluation of the Hypothesis and Research Questions, Final Remarks and Future Research.
520
$a
This book examines the challenges of low-noise amplifier (LNA) research and design in the millimeter-wave regime by dissecting the common LNA configurations and typical specifications into parts, which are then optimized separately over several chapters to suggest improvements in the current designs. Current trends towards increased wireless connectivity and the need to stay connected everywhere and all the time, call for extremely high data rates. Most of the wireless networks operate in frequency bands measured in low gigahertz. Typically, this is done through channels with moderate bandwidth. To keep up with the trends for increased data transmission rates, new and innovative ideas are needed. One of the areas of investigation is the transmission in millimeter-wave regime, ranging from 30 GHz to 300 GHz, where there is an abundance of bandwidth. The low-noise amplifier (LNA) is the first component that appears in the front ends of most microwave and millimeter-wave receivers after an antenna. The performance of a millimeter-wave receiver is therefore largely dependent on the performance of the LNA that is used. Primarily, the LNA is tasked with amplifying a signal while introducing as little noise into the signal as possible. This is a necessity, because the signal received by the antenna is already submerged in noise, thus the signal, before it can be processed, needs to be amplified with the smallest possible amount of additional noise introduced in this process. This is even more so true, due to the limitation of the wave propagation in millimeter-wave regime, where there is a trade-off between data-rate, range and power.
650
0
$a
Electronic circuits.
$3
563332
650
0
$a
Solid state physics.
$3
641431
650
0
$a
Computer-aided engineering.
$3
560192
650
1 4
$a
Circuits and Systems.
$3
670901
650
2 4
$a
Solid State Physics.
$3
768851
650
2 4
$a
Computer-Aided Engineering (CAD, CAE) and Design.
$3
669928
700
1
$a
Sinha, Saurabh.
$4
aut
$4
http://id.loc.gov/vocabulary/relators/aut
$3
1104131
710
2
$a
SpringerLink (Online service)
$3
593884
773
0
$t
Springer Nature eBook
776
0 8
$i
Printed edition:
$z
9783319690193
776
0 8
$i
Printed edition:
$z
9783319690216
776
0 8
$i
Printed edition:
$z
9783319887029
830
0
$a
Signals and Communication Technology,
$x
1860-4862
$3
1254245
856
4 0
$u
https://doi.org/10.1007/978-3-319-69020-9
912
$a
ZDB-2-ENG
912
$a
ZDB-2-SXE
950
$a
Engineering (SpringerNature-11647)
950
$a
Engineering (R0) (SpringerNature-43712)
筆 0 讀者評論
多媒體
評論
新增評論
分享你的心得
Export
取書館別
處理中
...
變更密碼[密碼必須為2種組合(英文和數字)及長度為10碼以上]
登入