國立虎尾科技大學 |

Construction 3D printing = selected papers from the 4-IC3DcP Conference /

Record Type:	Language materials, printed : Monograph/item
Title/Author:	Construction 3D printing/ edited by Ming Jen Tan ... [et al.].
Reminder of title:	selected papers from the 4-IC3DcP Conference /
other author:	Tan, Ming Jen.
corporate name:	Workshop on the Preservation of Stability under Discretization
Published:	Cham :Springer Nature Switzerland : : 2024.,
Description:	xiv, 290 p. :ill. (some col.), digital ; : 24 cm.;
Contained By:	Springer Nature eBook
Subject:	Construction industry - Congresses. - Technological innovations -
Online resource:	https://doi.org/10.1007/978-3-031-64269-2
ISBN:	9783031642692

Construction 3D printing = selected papers from the 4-IC3DcP Conference /
Construction 3D printingselected papers from the 4-IC3DcP Conference /[electronic resource] :edited by Ming Jen Tan ... [et al.]. - Cham :Springer Nature Switzerland :2024. - xiv, 290 p. :ill. (some col.), digital ;24 cm. - Springer tracts in additive manufacturing,2730-9584. - Springer tracts in additive manufacturing..

This book reports the dynamic progress made in Construction 3D Printing. It compiles the wealth of knowledge shared at the conference, which took place from 19-21 July 2023 at Nanyang Technological University (NTU, Singapore) Building on the success of its inaugural event at Swinburne University of Technology in Melbourne (Australia) in November 2018, the 2nd edition convened at Hebei University of Technology in Tianjin in October 2019, and the 3rd conference was held virtually in June 2022, predominantly organized by TongJi University, Shanghai. Moreover, in May 2021, Southeast University (Nanjing) orchestrated an International Conference on 3D Printing Concrete Materials and Structures in an online format. Encompassing a wide array of topics, this book presents works into established technology, modeling, simulation, materials (including recycled materials and concrete), geopolymer, fiber reinforcement and composite materials, testing and standards, applications, Building Information Modeling (BIM), design, optimization, structural and intelligent monitoring, as well as robotics and automation. This book serves as a timely and invaluable reference for both scholars and professionals in the expansive realm of Construction 3D Printing, offering insights into its progress over the last decade and its readiness for wider adoption.

ISBN: 9783031642692

Standard No.: 10.1007/978-3-031-64269-2doiSubjects--Topical Terms:

1455285
Construction industry
--Technological innovations--Congresses.

LC Class. No.: TS171.95

Dewey Class. No.: 690.028

Construction 3D printing = selected papers from the 4-IC3DcP Conference /
LDR:02410nam a2200325 a 4500 001 1133982
003 DE-He213
005 20240711125254.0
006 m d
007 cr nn 008maaau
008 241213s2024 sz s 0 eng d
020 $a 9783031642692 $q (electronic bk.)
020 $a 9783031642685 $q (paper)
024 7 $a 10.1007/978-3-031-64269-2 $2 doi
035 $a 978-3-031-64269-2
040 $a GP $c GP
041 0 $a eng
050 4 $a TS171.95
072 7 $a TNK $2 bicssc
072 7 $a TEC005050 $2 bisacsh
072 7 $a TNK $2 thema
082 0 4 $a 690.028 $2 23
090 $a TS171.95 $b .I61 2023
111 2 $a Workshop on the Preservation of Stability under Discretization $d (2001 : $c Fort Collins, Colo.) $3 527686
245 1 0 $a Construction 3D printing $h [electronic resource] : $b selected papers from the 4-IC3DcP Conference / $c edited by Ming Jen Tan ... [et al.].
260 $a Cham : $c 2024. $b Springer Nature Switzerland : $b Imprint: Springer,
300 $a xiv, 290 p. : $b ill. (some col.), digital ; $c 24 cm.
490 1 $a Springer tracts in additive manufacturing, $x 2730-9584
520 $a This book reports the dynamic progress made in Construction 3D Printing. It compiles the wealth of knowledge shared at the conference, which took place from 19-21 July 2023 at Nanyang Technological University (NTU, Singapore) Building on the success of its inaugural event at Swinburne University of Technology in Melbourne (Australia) in November 2018, the 2nd edition convened at Hebei University of Technology in Tianjin in October 2019, and the 3rd conference was held virtually in June 2022, predominantly organized by TongJi University, Shanghai. Moreover, in May 2021, Southeast University (Nanjing) orchestrated an International Conference on 3D Printing Concrete Materials and Structures in an online format. Encompassing a wide array of topics, this book presents works into established technology, modeling, simulation, materials (including recycled materials and concrete), geopolymer, fiber reinforcement and composite materials, testing and standards, applications, Building Information Modeling (BIM), design, optimization, structural and intelligent monitoring, as well as robotics and automation. This book serves as a timely and invaluable reference for both scholars and professionals in the expansive realm of Construction 3D Printing, offering insights into its progress over the last decade and its readiness for wider adoption.
650 0 $a Construction industry $x Technological innovations $v Congresses. $3 1455285
650 0 $a Three-dimensional printing $v Congresses. $3 1414518
650 1 4 $a Building Construction and Design. $3 1114677
650 2 4 $a Mechanical Process Engineering. $3 1388187
700 1 $a Tan, Ming Jen. $3 1455284
710 2 $a SpringerLink (Online service) $3 593884
773 0 $t Springer Nature eBook
830 0 $a Springer tracts in additive manufacturing. $3 1417430
856 4 0 $u https://doi.org/10.1007/978-3-031-64269-2
950 $a Engineering (SpringerNature-11647)