國立虎尾科技大學 |

Experimentation and Validation of UAS Mounted Wind Sensors for Microscale Wind Mapping.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	Experimentation and Validation of UAS Mounted Wind Sensors for Microscale Wind Mapping./
Author:	Revard, Braydon.
Description:	1 online resource (157 pages)
Notes:	Source: Masters Abstracts International, Volume: 85-07.
Contained By:	Masters Abstracts International85-07.
Subject:	Aerospace engineering. -
Online resource:	click for full text (PQDT)
ISBN:	9798381364743

Experimentation and Validation of UAS Mounted Wind Sensors for Microscale Wind Mapping.
Revard, Braydon.

Experimentation and Validation of UAS Mounted Wind Sensors for Microscale Wind Mapping. - 1 online resource (157 pages)

Source: Masters Abstracts International, Volume: 85-07.

Thesis (M.S.)--Oklahoma State University, 2023.

Includes bibliographical references

UAS technologies are becoming more widely utilized in civil and commercial fields and military applications. Amazon's drone delivery service and Boeing's eVTOL air taxi are some examples of this. With small urban UAS applications becoming common, infrastructure, such as urban wind gust modeling known as "wind mapping" is being developed. Safety and efficiency of UAS operations are strongly impacted by low-altitude wind, such as gusts around buildings. Gusts can negatively affect pilot operations, reduce flight time, and cause damage to the UAS system. For this project, a fleet of specialized UAS quad rotors collected local wind data around buildings and urban environments to aid in creating a "wind map" to model gust behavior. UAS systems equipped with ultrasonic anemometers were experimentally validated through comparison flights near Oklahoma Mesonet towers and mast mounted anemometers. Wind measurements were then collected around buildings on the Oklahoma State University campus, specifically the Kerr-Drummond buildings, to model wind gusts inside of an urban environment to create a "wind map" model concept. Through the validation process it was determined that the UAS mounted wind sensors could accurately measure wind speed within 1 m/s of known accurate wind sensors. The experimental wind map result from the Kerr-Drummond flights resulted in finding high turbulence areas to avoid during urban UAS operations.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798381364743Subjects--Topical Terms:

686400
Aerospace engineering.
Subjects--Index Terms:

Ultrasonic anemometersIndex Terms--Genre/Form:

554714
Electronic books.

Experimentation and Validation of UAS Mounted Wind Sensors for Microscale Wind Mapping.
LDR:02819ntm a22004097 4500 001 1145154
005 20240617111357.5
006 m o d
007 cr mn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798381364743
035 $a (MiAaPQ)AAI30575802
035 $a AAI30575802
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Revard, Braydon. $3 1470382
245 1 0 $a Experimentation and Validation of UAS Mounted Wind Sensors for Microscale Wind Mapping.
264 0 $c 2023
300 $a 1 online resource (157 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 85-07.
500 $a Advisor: Jacob, Jamey.
502 $a Thesis (M.S.)--Oklahoma State University, 2023.
504 $a Includes bibliographical references
520 $a UAS technologies are becoming more widely utilized in civil and commercial fields and military applications. Amazon's drone delivery service and Boeing's eVTOL air taxi are some examples of this. With small urban UAS applications becoming common, infrastructure, such as urban wind gust modeling known as "wind mapping" is being developed. Safety and efficiency of UAS operations are strongly impacted by low-altitude wind, such as gusts around buildings. Gusts can negatively affect pilot operations, reduce flight time, and cause damage to the UAS system. For this project, a fleet of specialized UAS quad rotors collected local wind data around buildings and urban environments to aid in creating a "wind map" to model gust behavior. UAS systems equipped with ultrasonic anemometers were experimentally validated through comparison flights near Oklahoma Mesonet towers and mast mounted anemometers. Wind measurements were then collected around buildings on the Oklahoma State University campus, specifically the Kerr-Drummond buildings, to model wind gusts inside of an urban environment to create a "wind map" model concept. Through the validation process it was determined that the UAS mounted wind sensors could accurately measure wind speed within 1 m/s of known accurate wind sensors. The experimental wind map result from the Kerr-Drummond flights resulted in finding high turbulence areas to avoid during urban UAS operations.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Aerospace engineering. $3 686400
650 4 $a Mechanical engineering. $3 557493
650 4 $a Atmospheric sciences. $3 1179392
653 $a Ultrasonic anemometers
653 $a Microscale
653 $a Multirotor
653 $a UAS technologies
653 $a Urban environment
653 $a Windmap
655 7 $a Electronic books. $2 local $3 554714
690 $a 0538
690 $a 0548
690 $a 0725
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a Oklahoma State University. $b Mechanical & Aerospace Engineering. $3 1413491
773 0 $t Masters Abstracts International $g 85-07.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30575802 $z click for full text (PQDT)