國立虎尾科技大學 |

Physics-Based Modeling and Parameter Estimation Strategies for Rechargeable Lithium-Metal Battery Cells.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	Physics-Based Modeling and Parameter Estimation Strategies for Rechargeable Lithium-Metal Battery Cells./
Author:	Hileman, Wesley.
Description:	1 online resource (334 pages)
Notes:	Source: Masters Abstracts International, Volume: 85-11.
Contained By:	Masters Abstracts International85-11.
Subject:	Electrical engineering. -
Online resource:	click for full text (PQDT)
ISBN:	9798382338408

Physics-Based Modeling and Parameter Estimation Strategies for Rechargeable Lithium-Metal Battery Cells.
Hileman, Wesley.

Physics-Based Modeling and Parameter Estimation Strategies for Rechargeable Lithium-Metal Battery Cells. - 1 online resource (334 pages)

Source: Masters Abstracts International, Volume: 85-11.

Thesis (M.S.)--University of Colorado Colorado Springs, 2024.

Includes bibliographical references

This thesis develops physics-based models for rechargeable lithium-metal battery (LMB) cells and strategies for estimating the values of the model parameters from cell-level measurements. Highlighting the need for accurate models to optimize battery performance and lifespan, the author discusses the structure and operation of LMBs and their primary failure mechanisms-formation of dendritic lithium (Li) at the Li-metal electrode during recharging and loss of electrolyte. The work develops a Newman-based model for LMB structured in such a way that cell-level measurements determine all parameter values without the need for cell teardown. A number of simplified models-including a transfer-function model, an equilibrium-perturbation model, a high-frequency edge model, and a second-harmonic model-are developed for full LMB cells for the first time. These models are used to devise a strategy to estimate the values of the model parameters by regression to open-circuit potential (OCP) and electrochemical-impedance spectroscopy (EIS) measurements. Before application to a single-layer LMB pouch cell, the author validates the strategy against simulated measurements derived from a synthetic cell with known parameter values. The voltage RMSE between the fully identified model's predictions and laboratory measurements is about 4.2mV for a GITT discharge profile and 10.3mV for a C/4-average half-sine discharge profile. In addition, estimates of the solid-diffusion coefficient derived from model regression agree with those estimated from an independent GITT experiment. MATLAB code is provided to simulate the Newman model in COMSOL, compute cell impedance and the internal electrochemical variables from the TF model, and perform the model regressions. As an avenue for future work, the possibility of incorporating explicit models for the growth of dendritic Li is discussed.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798382338408Subjects--Topical Terms:

596380
Electrical engineering.
Subjects--Index Terms:

Electrochemical impedanceIndex Terms--Genre/Form:

554714
Electronic books.

Physics-Based Modeling and Parameter Estimation Strategies for Rechargeable Lithium-Metal Battery Cells.
LDR:03346ntm a22004217 4500 001 1150484
005 20241028051502.5
006 m o d
007 cr bn ---uuuuu
008 250605s2024 xx obm 000 0 eng d
020 $a 9798382338408
035 $a (MiAaPQ)AAI31238505
035 $a AAI31238505
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Hileman, Wesley. $3 1476973
245 1 0 $a Physics-Based Modeling and Parameter Estimation Strategies for Rechargeable Lithium-Metal Battery Cells.
264 0 $c 2024
300 $a 1 online resource (334 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 85-11.
500 $a Advisor: Plett, Gregory L.
502 $a Thesis (M.S.)--University of Colorado Colorado Springs, 2024.
504 $a Includes bibliographical references
520 $a This thesis develops physics-based models for rechargeable lithium-metal battery (LMB) cells and strategies for estimating the values of the model parameters from cell-level measurements. Highlighting the need for accurate models to optimize battery performance and lifespan, the author discusses the structure and operation of LMBs and their primary failure mechanisms-formation of dendritic lithium (Li) at the Li-metal electrode during recharging and loss of electrolyte. The work develops a Newman-based model for LMB structured in such a way that cell-level measurements determine all parameter values without the need for cell teardown. A number of simplified models-including a transfer-function model, an equilibrium-perturbation model, a high-frequency edge model, and a second-harmonic model-are developed for full LMB cells for the first time. These models are used to devise a strategy to estimate the values of the model parameters by regression to open-circuit potential (OCP) and electrochemical-impedance spectroscopy (EIS) measurements. Before application to a single-layer LMB pouch cell, the author validates the strategy against simulated measurements derived from a synthetic cell with known parameter values. The voltage RMSE between the fully identified model's predictions and laboratory measurements is about 4.2mV for a GITT discharge profile and 10.3mV for a C/4-average half-sine discharge profile. In addition, estimates of the solid-diffusion coefficient derived from model regression agree with those estimated from an independent GITT experiment. MATLAB code is provided to simulate the Newman model in COMSOL, compute cell impedance and the internal electrochemical variables from the TF model, and perform the model regressions. As an avenue for future work, the possibility of incorporating explicit models for the growth of dendritic Li is discussed.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Electrical engineering. $3 596380
650 4 $a Physical chemistry. $3 1148725
650 4 $a Alternative energy. $3 1241221
650 4 $a Materials science. $3 557839
653 $a Electrochemical impedance
653 $a Lithium metal battery
653 $a Nonlinear model
653 $a Perturbation model
653 $a Pulse model
653 $a Transfer function
655 7 $a Electronic books. $2 local $3 554714
690 $a 0544
690 $a 0494
690 $a 0363
690 $a 0794
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a University of Colorado Colorado Springs. $b College of Engineering and Applied Science-Electrical Engineering. $3 1187079
773 0 $t Masters Abstracts International $g 85-11.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=31238505 $z click for full text (PQDT)