國立虎尾科技大學 |

Effects of telepresence light height and ambien light on glare and appearance.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	Effects of telepresence light height and ambien light on glare and appearance./
Author:	Beno, James P.
Description:	1 online resource (139 pages)
Notes:	Source: Masters Abstracts International, Volume: 72-01.
Contained By:	Masters Abstracts International72-01.
Subject:	Industrial engineering. -
Online resource:	click for full text (PQDT)
ISBN:	9781109592061

Effects of telepresence light height and ambien light on glare and appearance.
Beno, James P.

Effects of telepresence light height and ambien light on glare and appearance. - 1 online resource (139 pages)

Source: Masters Abstracts International, Volume: 72-01.

Thesis (M.S.)--San Jose State University, 2009.

Includes bibliographical references

Telepresence technology may soon appear in the home where changing light conditions could make it difficult to portray a person well on video. This research investigated whether the amount of telepresence fill light required for a well-lit appearance was enough to cause discomfort glare. Thirty participants adjusted the output of two fill lights: one in front of them (focusing on discomfort) and one in front of the remote telepresence user (focusing on appearance). Ambient light levels (48-71 lux, 118-130 lux, 269-281 lux) and fill-light positions (top of display, 30.5 cm higher) were varied. For all conditions, the amount of light required to produce a pleasing portrayal was greater than that at the point of discomfort. The mean discomfort threshold was the same for all ambient light conditions (663.46 cd/m 2, 8.44 lux at 2.44 m), possibly because background luminance did not change enough. The amount of light that produced a well-lit appearance was about the same for dim and moderate ambient light (3,348.65 cd/m 2, 51.61 lux at 2.44 m) but lower for bright ambient light (1,204.47 cd/m2, 17.81 lux at 2.44 m). Raising the light source did not affect discomfort but did require more light for a good portrayal. Technology providers should consider collocating the fill light with the display, limiting its luminance to 663.46 cd/m2 for low-light environments similar to this research, and raising or lowering that limit as the background luminance changes.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9781109592061Subjects--Topical Terms:

679492
Industrial engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Effects of telepresence light height and ambien light on glare and appearance.
LDR:02692ntm a22003377 4500 001 1151950
005 20241125080150.5
006 m o d
007 cr mn ---uuuuu
008 250605s2009 xx obm 000 0 eng d
020 $a 9781109592061
035 $a (MiAaPQ)AAI1478587
035 $a AAI1478587
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Beno, James P. $3 1478799
245 1 0 $a Effects of telepresence light height and ambien light on glare and appearance.
264 0 $c 2009
300 $a 1 online resource (139 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Masters Abstracts International, Volume: 72-01.
500 $a Publisher info.: Dissertation/Thesis.
500 $a Advisor: Freund, Louis E.
502 $a Thesis (M.S.)--San Jose State University, 2009.
504 $a Includes bibliographical references
520 $a Telepresence technology may soon appear in the home where changing light conditions could make it difficult to portray a person well on video. This research investigated whether the amount of telepresence fill light required for a well-lit appearance was enough to cause discomfort glare. Thirty participants adjusted the output of two fill lights: one in front of them (focusing on discomfort) and one in front of the remote telepresence user (focusing on appearance). Ambient light levels (48-71 lux, 118-130 lux, 269-281 lux) and fill-light positions (top of display, 30.5 cm higher) were varied. For all conditions, the amount of light required to produce a pleasing portrayal was greater than that at the point of discomfort. The mean discomfort threshold was the same for all ambient light conditions (663.46 cd/m 2, 8.44 lux at 2.44 m), possibly because background luminance did not change enough. The amount of light that produced a well-lit appearance was about the same for dim and moderate ambient light (3,348.65 cd/m 2, 51.61 lux at 2.44 m) but lower for bright ambient light (1,204.47 cd/m2, 17.81 lux at 2.44 m). Raising the light source did not affect discomfort but did require more light for a good portrayal. Technology providers should consider collocating the fill light with the display, limiting its luminance to 663.46 cd/m2 for low-light environments similar to this research, and raising or lowering that limit as the background luminance changes.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Industrial engineering. $3 679492
650 4 $a Environmental engineering. $3 557376
655 7 $a Electronic books. $2 local $3 554714
690 $a 0546
690 $a 0775
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a San Jose State University. $3 1191734
773 0 $t Masters Abstracts International $g 72-01.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1478587 $z click for full text (PQDT)