Language:
English
繁體中文
Help
Login
Back
Switch To:
Labeled
|
MARC Mode
|
ISBD
Electrochemical behavior of dense el...
~
Louisiana Tech University.
Electrochemical behavior of dense electrodes for impedancemetric NOx sensors.
Record Type:
Language materials, manuscript : Monograph/item
Title/Author:
Electrochemical behavior of dense electrodes for impedancemetric NOx sensors./
Author:
Pal, Nabamita.
Description:
1 online resource (139 pages)
Notes:
Source: Dissertation Abstracts International, Volume: 79-03(E), Section: B.
Contained By:
Dissertation Abstracts International79-03B(E).
Subject:
Electrical engineering. -
Online resource:
click for full text (PQDT)
ISBN:
9780355558524
Electrochemical behavior of dense electrodes for impedancemetric NOx sensors.
Pal, Nabamita.
Electrochemical behavior of dense electrodes for impedancemetric NOx sensors.
- 1 online resource (139 pages)
Source: Dissertation Abstracts International, Volume: 79-03(E), Section: B.
Thesis (Ph.D.)
Includes bibliographical references
NOx (NO and NO2) exhaust gas sensors for diesel powered vehicles have traditionally consisted of porous platinum (Pt) electrodes along with a dense ZrO2 based electrolyte. Advancement in diesel engine technology results in lower NOx emissions. Although Pt is chemically and mechanically tolerant to the extreme exhaust gas environment, it is also a strong catalyst for oxygen reduction, which can interfere with the detection of NOx at concentrations below 100 ppm. Countering this behavior can add to the complexity and cost of the conventional NO x sensor design. Recent studies have shown that dense electrodes are less prone to heterogeneous catalytic oxygen reactions, thereby enabling greater NOx sensitivity. Sensors composed of this novel architecture (i.e., dense electrode and porous electrolyte) are still in an inchoate stage of research. There is particular interest in acquiring greater knowledge of the sensing behavior of non-catalytic dense electrodes as they may offer a lower cost alternative to using Pt electrodes.
Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018
Mode of access: World Wide Web
ISBN: 9780355558524Subjects--Topical Terms:
596380
Electrical engineering.
Index Terms--Genre/Form:
554714
Electronic books.
Electrochemical behavior of dense electrodes for impedancemetric NOx sensors.
LDR
:04200ntm a2200385Ki 4500
001
910861
005
20180517112612.5
006
m o u
007
cr mn||||a|a||
008
190606s2017 xx obm 000 0 eng d
020
$a
9780355558524
035
$a
(MiAaPQ)AAI10753660
035
$a
AAI10753660
040
$a
MiAaPQ
$b
eng
$c
MiAaPQ
099
$a
TUL
$f
hyy
$c
available through World Wide Web
100
1
$a
Pal, Nabamita.
$3
1182346
245
1 0
$a
Electrochemical behavior of dense electrodes for impedancemetric NOx sensors.
264
0
$c
2017
300
$a
1 online resource (139 pages)
336
$a
text
$b
txt
$2
rdacontent
337
$a
computer
$b
c
$2
rdamedia
338
$a
online resource
$b
cr
$2
rdacarrier
500
$a
Source: Dissertation Abstracts International, Volume: 79-03(E), Section: B.
500
$a
Adviser: F. P. Murray.
502
$a
Thesis (Ph.D.)
$c
Louisiana Tech University
$d
2017.
504
$a
Includes bibliographical references
520
$a
NOx (NO and NO2) exhaust gas sensors for diesel powered vehicles have traditionally consisted of porous platinum (Pt) electrodes along with a dense ZrO2 based electrolyte. Advancement in diesel engine technology results in lower NOx emissions. Although Pt is chemically and mechanically tolerant to the extreme exhaust gas environment, it is also a strong catalyst for oxygen reduction, which can interfere with the detection of NOx at concentrations below 100 ppm. Countering this behavior can add to the complexity and cost of the conventional NO x sensor design. Recent studies have shown that dense electrodes are less prone to heterogeneous catalytic oxygen reactions, thereby enabling greater NOx sensitivity. Sensors composed of this novel architecture (i.e., dense electrode and porous electrolyte) are still in an inchoate stage of research. There is particular interest in acquiring greater knowledge of the sensing behavior of non-catalytic dense electrodes as they may offer a lower cost alternative to using Pt electrodes.
520
$a
This work focuses on the potential of the perovskite, strontium-doped lanthanum manganite (LSM), and LSM based composite materials as NOx sensor electrodes. Perovskite based electrodes are attractive because of their chemical, electrical, and thermal properties. To make LSM based composites three materials of different conductivities were chosen, namely, Au, yttria-stabilized zirconia (YSZ) and strontium-doped lanthanum cobalt ferrite (LSCF). Au was selected for its electronic conductivity, YSZ was chosen because of its ionic conductivity and LSCF was selected as a mixed conductor. LSM-Au, LSM-YSZ and LSM-LSCF composite based NOx sensors were fabricated and analyzed using the impedancemetric method for NOx sensing. The goal was to investigate the electrochemical response, gas cross sensitivity, response rate, and rate-limiting mechanisms due to electrode reactions involving NO, NO2, O2, H2O, and CH4 that impact the NOx sensing response.
520
$a
From the impedancemetric analysis, it was found that LSM-Au based NO x sensors showed much improved NOx sensitivity along with lower water and CH4 cross-sensitivity. Mixing YSZ and LSCF with LSM did not demonstrate any significant improvement in sensing performance.
520
$a
Dense gold (Au) is also a promising alternative electrode to Pt, since it does not readily promote O2 reduction and is highly stable under exhaust gas conditions. Yet, the low melting temperature of Au (i.e, 1060 °C) limits the manufacturing feasibility as a NOx sensor electrode. Since Pt electrodes are compatible with high temperature sensor manufacturing processes and Au offers desirable electrochemical sensing behavior Au/Pt twine electrodes were studied as a part of this thesis. The preliminary results showed the Pt component of the Au/Pt twine electrodes did not compromise the NOx sensing capability of Au electrode.
533
$a
Electronic reproduction.
$b
Ann Arbor, Mich. :
$c
ProQuest,
$d
2018
538
$a
Mode of access: World Wide Web
650
4
$a
Electrical engineering.
$3
596380
650
4
$a
Chemical engineering.
$3
555952
650
4
$a
Chemistry.
$3
593913
655
7
$a
Electronic books.
$2
local
$3
554714
690
$a
0544
690
$a
0542
690
$a
0485
710
2
$a
ProQuest Information and Learning Co.
$3
1178819
710
2
$a
Louisiana Tech University.
$3
1182347
773
0
$t
Dissertation Abstracts International
$g
79-03B(E).
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10753660
$z
click for full text (PQDT)
based on 0 review(s)
Multimedia
Reviews
Add a review
and share your thoughts with other readers
Export
pickup library
Processing
...
Change password
Login