國立虎尾科技大學 |

An Adaptive Creep Modeing Approach Using Metamodeling.

Record Type:	Language materials, manuscript : Monograph/item
Title/Author:	An Adaptive Creep Modeing Approach Using Metamodeling./
Author:	Haque, Mohammad Shafinul.
Description:	1 online resource (205 pages)
Notes:	Source: Dissertation Abstracts International, Volume: 79-10(E), Section: B.
Contained By:	Dissertation Abstracts International79-10B(E).
Subject:	Mechanical engineering. -
Online resource:	click for full text (PQDT)
ISBN:	9780438027749

An Adaptive Creep Modeing Approach Using Metamodeling.
Haque, Mohammad Shafinul.

An Adaptive Creep Modeing Approach Using Metamodeling. - 1 online resource (205 pages)

Source: Dissertation Abstracts International, Volume: 79-10(E), Section: B.

Thesis (Ph.D.)--The University of Texas at El Paso, 2018.

Includes bibliographical references

Recent drives to increase the efficiency of existing fossil energy power plants and the development of Advanced Ultrasupercritical power plants, have led to designs with steam pressures above 4000 psi and temperatures exceeding 1400°F. The complexity of the applied thermo-mechano chemical boundary conditions makes it critically important to consider creep and creep related failures. A primary concern to FE practitioners is the determination of which constitutive models are the "best", capable of reproducing the mechanisms expected in an intended design accurately; as well as what experimental data sets are proper or "best" to use for fitting the constitutive parameters needed for the model(s) of interest. In this dissertation the work completed towards these questions are presented.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2018

Mode of access: World Wide Web

ISBN: 9780438027749Subjects--Topical Terms:

557493
Mechanical engineering.
Index Terms--Genre/Form:

554714
Electronic books.

An Adaptive Creep Modeing Approach Using Metamodeling.
LDR:03044ntm a2200337Ki 4500 001 916502
005 20181002081327.5
006 m o u
007 cr mn||||a|a||
008 190606s2018 xx obm 000 0 eng d
020 $a 9780438027749
035 $a (MiAaPQ)AAI10792340
035 $a (MiAaPQ)utep:12617
035 $a AAI10792340
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Haque, Mohammad Shafinul. $3 1190249
245 1 3 $a An Adaptive Creep Modeing Approach Using Metamodeling.
264 0 $c 2018
300 $a 1 online resource (205 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertation Abstracts International, Volume: 79-10(E), Section: B.
500 $a Adviser: Calvin M. Stewart.
502 $a Thesis (Ph.D.)--The University of Texas at El Paso, 2018.
504 $a Includes bibliographical references
520 $a Recent drives to increase the efficiency of existing fossil energy power plants and the development of Advanced Ultrasupercritical power plants, have led to designs with steam pressures above 4000 psi and temperatures exceeding 1400°F. The complexity of the applied thermo-mechano chemical boundary conditions makes it critically important to consider creep and creep related failures. A primary concern to FE practitioners is the determination of which constitutive models are the "best", capable of reproducing the mechanisms expected in an intended design accurately; as well as what experimental data sets are proper or "best" to use for fitting the constitutive parameters needed for the model(s) of interest. In this dissertation the work completed towards these questions are presented.
520 $a Various forms of creep data are collected and statistical analysis are performed. It is observed that data pre-processing and inclusion of disparate datasets into the calibration process can significantly improve the prediction accuracy. Realistic extrapolation and interpolation is possible for wide range of service condition leading to the development of Creep Design Maps. Towards the development of an approach for determining the "best" model; it is hypothesized that, "a general model (metamodel) derived by combining and exploiting creep models where the submodels (existing and new models that are exploited to develop the metamodel) are special case can facilitate instantaneous and efficient evaluation of the submodels leading to the selection of "best" model". Successful metamodeling examples for stress-rupture, creep deformation, and CDM based models are provided. A guideline for metamodeling and multiaxiality function by combing the international standards (e. g. ASME PVP III, ASTM, ECCC, RCC-MR, R5) is presented.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2018
538 $a Mode of access: World Wide Web
650 4 $a Mechanical engineering. $3 557493
655 7 $a Electronic books. $2 local $3 554714
690 $a 0548
710 2 $a ProQuest Information and Learning Co. $3 1178819
710 2 $a The University of Texas at El Paso. $b Mechanical Engin.. $3 1178954
773 0 $t Dissertation Abstracts International $g 79-10B(E).
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10792340 $z click for full text (PQDT)