國立虎尾科技大學 |

Reshaping Concrete : = Empowering Development Through Low-Carbon Structural Design.

紀錄類型:	書目-語言資料,手稿 : Monograph/item
正題名/作者:	Reshaping Concrete :/
其他題名:	Empowering Development Through Low-Carbon Structural Design.
作者:	Ismail, Mohamed Abdelbagi.
面頁冊數:	1 online resource (220 pages)
附註:	Source: Dissertations Abstracts International, Volume: 85-02, Section: B.
Contained By:	Dissertations Abstracts International85-02B.
標題:	Civil engineering. -
電子資源:	click for full text (PQDT)
ISBN:	9798380097291

Reshaping Concrete : = Empowering Development Through Low-Carbon Structural Design.
Ismail, Mohamed Abdelbagi.

Reshaping Concrete :Empowering Development Through Low-Carbon Structural Design. - 1 online resource (220 pages)

Source: Dissertations Abstracts International, Volume: 85-02, Section: B.

Thesis (Ph.D.)--Massachusetts Institute of Technology, 2023.

Includes bibliographical references

Less Economically Developed Countries (LEDCs) are struggling to meet the demand for affordable housing in their growing cities. There are several reasons for this, but a major constraint is the high cost of construction materials. In LEDCs, material costs can constitute up to 90% of the total cost of residential construction. Importantly, structural systems for multi-story housing in LEDCs are nearly always constructed in reinforced concrete and typically use structurally inefficient typologies like prismatic beams and flat slabs despite their structural material waste. This is because their construction mimics the materially inefficient practices of the More Economically Developed Countries (MEDCs), which were developed to reduce labor over material costs. The mounting use of steel-reinforced concrete structures in LEDC cities also raises concern about the environmental costs of construction; construction accounts for 20-30% of LEDC carbon emissions. This dissertation addresses these challenges with a set of strategies for the design and analysis of materially efficient concrete elements that can reduce the economic and environmental costs of urban construction. Developed to meet the constraints of LEDCs, structural elements are optimized to reduce the embodied carbon associated with the concrete and reinforcing steel while resisting the same loads as a standard building structure. These strategies include a novel approach to 3D shape parameterization, as well as a decoupled analytical engineering analysis method that accounts for the key failure modes and code-based constraints of reinforced concrete design. This method is verified through design examples that show how the embodied energy and carbon of concrete floor systems can be reduced by over 60% through shape optimization. Prototypes are fabricated and load tested to verify the efficacy of the structural design method, and to illustrate its ability to generate fabricable designs in an LEDC construction context. Finally, in order to broaden its potential impact, this research involves the development of accessible tools and methods for designers and stakeholders in LEDCs. The thesis presents an open-source toolset for the design and analysis of complex concrete elements and an intuitive design interface to communicate the performance and visual impact of materially efficient structures in real-time during early-stage design phases. This is especially useful in designs with exposed structural systems, allowing structural performance to play a key role in the final architecture.This thesis presents several strategies for the design of efficient concrete structures that allow us to build far more with far less, reducing the environmental and economic costs of construction while responding to the needs of LEDCs. These methods may enable the design of concrete elements for multiple performance criteria such as structural behavior, acoustic transmission, and thermal mass. They can also enable an accessible design practice through machine learning, real-time iterative workflows, and visualization tools that include the end user in the architectural design process.Keywords: reinforced concrete, shape optimization, digital fabrication, stress testing, machine learning,development, sustainability.

Electronic reproduction.
Ann Arbor, Mich. :
ProQuest,
2024

Mode of access: World Wide Web

ISBN: 9798380097291Subjects--Topical Terms:

561339
Civil engineering.
Index Terms--Genre/Form:

554714
Electronic books.

Reshaping Concrete : = Empowering Development Through Low-Carbon Structural Design.
LDR:04598ntm a22003617 4500 001 1149650
005 20241022112606.5
006 m o d
007 cr bn ---uuuuu
008 250605s2023 xx obm 000 0 eng d
020 $a 9798380097291
035 $a (MiAaPQ)AAI30672413
035 $a (MiAaPQ)MIT1721_1_150043
035 $a AAI30672413
040 $a MiAaPQ $b eng $c MiAaPQ $d NTU
100 1 $a Ismail, Mohamed Abdelbagi. $3 1475964
245 1 0 $a Reshaping Concrete : $b Empowering Development Through Low-Carbon Structural Design.
264 0 $c 2023
300 $a 1 online resource (220 pages)
336 $a text $b txt $2 rdacontent
337 $a computer $b c $2 rdamedia
338 $a online resource $b cr $2 rdacarrier
500 $a Source: Dissertations Abstracts International, Volume: 85-02, Section: B.
500 $a Advisor: Mueller, Caitlin.
502 $a Thesis (Ph.D.)--Massachusetts Institute of Technology, 2023.
504 $a Includes bibliographical references
520 $a Less Economically Developed Countries (LEDCs) are struggling to meet the demand for affordable housing in their growing cities. There are several reasons for this, but a major constraint is the high cost of construction materials. In LEDCs, material costs can constitute up to 90% of the total cost of residential construction. Importantly, structural systems for multi-story housing in LEDCs are nearly always constructed in reinforced concrete and typically use structurally inefficient typologies like prismatic beams and flat slabs despite their structural material waste. This is because their construction mimics the materially inefficient practices of the More Economically Developed Countries (MEDCs), which were developed to reduce labor over material costs. The mounting use of steel-reinforced concrete structures in LEDC cities also raises concern about the environmental costs of construction; construction accounts for 20-30% of LEDC carbon emissions. This dissertation addresses these challenges with a set of strategies for the design and analysis of materially efficient concrete elements that can reduce the economic and environmental costs of urban construction. Developed to meet the constraints of LEDCs, structural elements are optimized to reduce the embodied carbon associated with the concrete and reinforcing steel while resisting the same loads as a standard building structure. These strategies include a novel approach to 3D shape parameterization, as well as a decoupled analytical engineering analysis method that accounts for the key failure modes and code-based constraints of reinforced concrete design. This method is verified through design examples that show how the embodied energy and carbon of concrete floor systems can be reduced by over 60% through shape optimization. Prototypes are fabricated and load tested to verify the efficacy of the structural design method, and to illustrate its ability to generate fabricable designs in an LEDC construction context. Finally, in order to broaden its potential impact, this research involves the development of accessible tools and methods for designers and stakeholders in LEDCs. The thesis presents an open-source toolset for the design and analysis of complex concrete elements and an intuitive design interface to communicate the performance and visual impact of materially efficient structures in real-time during early-stage design phases. This is especially useful in designs with exposed structural systems, allowing structural performance to play a key role in the final architecture.This thesis presents several strategies for the design of efficient concrete structures that allow us to build far more with far less, reducing the environmental and economic costs of construction while responding to the needs of LEDCs. These methods may enable the design of concrete elements for multiple performance criteria such as structural behavior, acoustic transmission, and thermal mass. They can also enable an accessible design practice through machine learning, real-time iterative workflows, and visualization tools that include the end user in the architectural design process.Keywords: reinforced concrete, shape optimization, digital fabrication, stress testing, machine learning,development, sustainability.
533 $a Electronic reproduction. $b Ann Arbor, Mich. : $c ProQuest, $d 2024
538 $a Mode of access: World Wide Web
650 4 $a Civil engineering. $3 561339
650 4 $a Architectural engineering. $3 1180400
650 4 $a Structural engineering. $3 557594
650 4 $a Building codes. $3 1466900
650 4 $a Design. $3 595500
655 7 $a Electronic books. $2 local $3 554714
690 $a 0389
690 $a 0729
690 $a 0543
690 $a 0462
710 2 $a Massachusetts Institute of Technology. $b Department of Architecture. $3 1467117
710 2 $a ProQuest Information and Learning Co. $3 1178819
773 0 $t Dissertations Abstracts International $g 85-02B.
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30672413 $z click for full text (PQDT)