Microstructure.
Overview
| Works: | 55 works in 39 publications in 39 languages | |
|---|---|---|
Titles
Microstructure of metals and alloys : = an atlas of transmission electron microscopy images /
by:
(Language materials, printed)
Particle scattering, X-ray diffraction, and microstructure of solids and liquids
by:
(Language materials, printed)
Modeling and simulation of microstructure evolution in solidifying alloys
by:
(Language materials, printed)
鈦銅合金的顯微組織與腐蝕特性之研究 = = Microstructure and Corrosion Properties of Ti-Cu Alloys /
by:
(Language materials, printed)
多道次氬焊對鈦合金顯微結構與腐蝕行為之研究 = = Microstructure Characterization and Corrosion Behavior of Multipass Tungsten Inert Gas Welded Titanium Alloy /
by:
(Language materials, printed)
摩擦攪拌點銲Mg-Al/Mg-Li異質鎂合金之接合強度與破壞行為探討 = = A Study on the Welding Strength and Failure Behaviors of Friction Stir Spot Welded Mg-Al/Mg-Li Dissimilar Magnesium Alloys /
by:
(Language materials, printed)
超高強度鋼電阻點銲之顯微組織與機械性質研究 = = Microstructures and Mechanical Properties of Resistance Spot Welded Ultra High Strength Steel /
by:
(Language materials, printed)
摩擦攪拌製程應用於純銅強化鋁合金之顯微組織與機械性質研究 = = Microstructure and Mechanical Properties of Friction Stir Processing Pure Copper Reinforced Aluminum Alloy /
by:
(Language materials, printed)
沃斯田鐵型不銹鋼與鎳基超合金硬銲接合之研究 = = Brazing of Austenitic Stainless Steel and Nickel-Based Superalloy /
by:
(Language materials, printed)
Plasticity and beyond = microstructures, crystal-plasticity and phase transitions /
by:
(Language materials, printed)
Material substructures in complex bodies = from atomic level to continuum /
by:
(Language materials, printed)
石墨添加物對氧化鈦與氧化鈦鈮陶瓷之燒結特性及機械性質的影響 = = Effect of Graphite Additives on TO and TNO Ceramic Sintering Properties and Mechanical Properties /
by:
(Language materials, printed)
鋯元素改質對6061鋁合金機械性質與顯微組織之影響 = = Effect of Zirconium Modification on Microstructure and Mechanical Properties of 6061 Aluminum Alloy /
by:
(Language materials, printed)
先進高強度鋼植釘銲之接合性研究 = = Investigation on Weldability of Advanced High-Strength Steel by Stud Welding /
by:
(Language materials, printed)
應用惰性氣體鎢極電弧銲於不銹鋼真空腔體組件銲接之研究 = = Research on Gas Tungsten Arc Welding of Stainless Steel Vacuum Chamber Component /
by:
(Language materials, printed)
添加稀土元素對鋁合金顯微組織與腐蝕特性之影響 = = Effect of Rare Earth Element Addition on Microstructures and Corrosion Characteristics of Aluminum Alloy /
by:
(Language materials, printed)
鈦合金表面以電漿轉移電弧銲覆鉻粉之顯微組織及機械性質研究 = = Study on Microstructural and Mechanical Properties of Plasma Transferred Arc Cladding of Chromium Powder on Titanium Alloy /
by:
(Language materials, printed)
探討超薄板微弧氬銲後的顯微組織與機械性質之研究 = = Study on the Microstructure and Mechanical Properties of Ultra-Thin Sheet Weld Joints Using Micro-TIG Welding /
by:
(Language materials, printed)
高鎳含量對灰鑄鐵顯微組織與腐蝕特性之影響 = = Microstructure and Corrosion Properties of Gray Cast Iron with High Content of Nickel /
by:
(Language materials, printed)
Wave dynamics, mechanics and physics of microstructured metamaterials = theoretical and experimental methods /
by:
(Language materials, printed)
銻元素添加對鋅鋁合金的顯微組織與腐蝕特性之影響 = = Effect of Antimony Addition on Microstructure and Corrosion Characteristics of Zinc Aluminum Alloy /
by:
(Language materials, printed)
硼元素含量對鋅合金的顯微組織與腐蝕行為之影響 = = Effect of Boron Content on Microstructure and Corrosion Behavior of Zinc Alloy /
by:
(Language materials, printed)
摩擦攪拌複合銲接對鋁合金的顯微組織及腐蝕特性之影響 = = Microstructure and Corrosion Characteristics of Hybrid Friction Stir Welded Aluminum Alloy /
by:
(Language materials, printed)
摩擦攪拌改質Mg-Al-Zn-(La/Ce)合金之組織特性及改善電化學抗腐蝕效應研究 = = Microstructural features and the improvement on electrochemical anti-corrosion resistance of friction stir processed Mg-Al-Zn-(La/Ce) alloy /
by:
(Language materials, printed)
鈦合金扣件鍛造製程之顯微組織及機械性質研究 = = The Study of Microstructure and Mechanical Properties of Titanium Alloy Fasteners Forging Process /
by:
(Language materials, printed)
鈰含量對鋁鎂矽合金顯微結構、硬度和腐蝕行為之影響 = = Effect of Cerium Content on the Microstructure, Hardness and Corrosion Behavior of Al-Mg-Si Alloy /
by:
(Language materials, printed)
Fabrication of 304L Stainless Steel and Aluminum Parts by Laser Foil Printing and Process Automation.
by:
(Language materials, printed)
Reaction-Based Laser Additive Manufacturing of Structural Metal-Ceramic Composites: Experimentation and Thermal Process Modeling.
by:
(Language materials, printed)
5083鋁合金TIG-MIG複合銲接之顯微組織及機械性質研究 = = Study on the Microstructure Characteristics and Mechanical Properties of TIG-MIG Hybrid Welded Joint for 5083 Aluminum Alloy /
by:
(Language materials, printed)
釩對於麻田散鐵不銹鋼顯微組織、硬度及腐蝕性能之影響 = = Effects of Vanadium on the Microstructure, Hardness and Corrosion Behavior of Martensite Stainless Steel /
by:
(Language materials, printed)
Zn-xMg合金之組織特性影響拉伸性質及在模擬體液之電化學腐蝕機構研究 = = Effect of microstructural features for Zn-xMg alloy on its tensile properties and the electrochemical corrosion mechanism in Simulated Body Fluid /
by:
(Language materials, printed)
銅元素對5083鋁合金之微觀組織、機械性質及腐蝕行為之影響 = = Microstructure, Mechanical Property and Corrosion Behavior of Copper-Modified 5083 Aluminum Alloy /
by:
(Language materials, printed)
Hybrid atomic-scale interface design for materials functionality /
by:
(Language materials, printed)
摩擦攪拌製程添加強化材料對鋁合金之微觀結構、機械強度及腐蝕行為之影響 = = The Effect of Reinforcing Material Addition on Microstructure, Mechanical Properties and Corrosion Behavior of Aluminum Alloys by Friction Stir Processing /
by:
(Language materials, printed)
Show more
Fewer
Subjects