Engineering, Mechanical.
Overview
| Works: | 74 works in 0 publications in 0 languages | |
|---|---|---|
Titles
Dynamic response and damage evolution of composite materials subjected to underwater explosive loading: An experimental and computational study.
by:
(Language materials, printed)
Multi-scale homogenization of moving interface problems with flux and field jumps.
by:
(Language materials, printed)
Non-Linear Endoscopic Microscopy System for Potential use in Diagnosing Rheumatoid Arthritis.
by:
(Language materials, printed)
Development of a Shape Memory Alloy Actuated Robotic Catheter for Endocardial Ablation: Modeling, Design Optimization, and Control.
by:
(Language materials, printed)
On the Modeling of Contact Problems for Curved and Straight Elastic Thin Continuums with Application to Non-Pneumatic Tires.
by:
(Language materials, printed)
In situ electrokinetic sample preparation for self-assembled monolayer based electrochemical biosensing.
by:
(Language materials, printed)
Free vibration and stability analysis of beams and plates with damaged boundaries via the spectral collocation method.
by:
(Language materials, printed)
Modeling and control of automatic transmission with planetary gears for shift quality.
by:
(Language materials, printed)
Dynamic properties of wood using the Split-Hopkinson Pressure Bar.
by:
(Language materials, printed)
Experimental investigation of spray development immediately behind a tire rolling on a wet surface.
by:
(Language materials, printed)
Modelisation des ecoulements diphasiques: Amortissement, forces interfaciales et turbulence diphasique.
by:
(Language materials, printed)
Early Fault Detection Scheme and Optimized CBM Strategy for Gear Transmission System Operating under Varying Loads.
by:
(Language materials, printed)
Novel MEMS Tactile Sensors for In-Vivo Tissue Characterization Measurements.
by:
(Language materials, printed)
Modeling and experimental study on heat transfer in squeeze casting of magnesium alloy AM60 and aluminum alloy A443.
by:
(Language materials, printed)
Early Fault Detection for Gear Shaft and Planetary Gear Based on Wavelet and Hidden Markov Modeling.
by:
(Language materials, printed)
The role of fibulin-5 in the growth and remodeling of mouse carotid arteries.
by:
(Language materials, printed)
Non-Equilibrium Molecular Dynamics Simulation of Bubble Nucleation in Nanocavities.
by:
(Language materials, printed)
Using the Motor Drive as a Sensor to Extract Spatial Domain Information.
by:
(Language materials, printed)
Target allocation under uncertainty during the vehicle development process.
by:
(Language materials, printed)
Fabrication and Characterization of Carbon MEMS Fractal Electrodes.
by:
(Language materials, printed)
Performance Evaluation, Wake Study, and Flow Visualization of Air and Large Diameter Water Droplets around the Blade of a Micro Horizontal Axis Wind Turbine.
by:
(Language materials, printed)
An integrated environment for simulation and control of mobile robots.
by:
(Language materials, printed)
Development and validation of four bar linkage kinematic & kinetic models of the upper limb and joystick for use in virtual prototyping.
by:
(Language materials, printed)
Micro/nano surface engineering for achieving extreme surface wettability.
by:
(Language materials, printed)
Parametric amplification in the context of vibratory energy harvesting.
by:
(Language materials, printed)
A versatile and computationally efficient condition indicator for AH-64 rotorcraft gearboxes.
by:
(Language materials, printed)
Stress analysis for a three phase plate with a concentric circular inclusion by deriving an Airy stress function.
by:
(Language materials, printed)
An experimental investigation of airfoils with perforated Gurney-type flaps.
by:
(Language materials, printed)
Investigating controller performance in hybrid SOFC systems with unknown nonlinearities.
by:
(Language materials, printed)
Coanda-assisted spray manipulation implementation to plasma spray.
by:
(Language materials, printed)
State Estimation Filtering Algorithms for Vehicle Attitude Determination using a Dual-Arc Accelerometer Array and 3-Axis Rate Gyroscopes.
by:
(Language materials, printed)
Modeling, simulation, and analysis of series hybrid electric vehicles for fuel economy improvement.
by:
(Language materials, printed)
Molecular dynamics study of particle impact induced bond breaking of single-walled carbon nanotubes and quality factors of nanocomposite structures .
by:
(Language materials, printed)
Modeling and finite element analysis of fluid structure interaction in a wind energy harvester .
by:
(Language materials, printed)
Comparison of three degree of freedom and six degree of freedom motion bases utilizing classical washout algorithms.
by:
(Language materials, printed)
Design and development of FZG setup for testing advanced lubricants in geared systems.
by:
(Language materials, printed)
Laser melting of a moving slab in relation to surface treatment application.
by:
(Language materials, printed)
Finite Element Analysis on the Effects of Elastomeric Inclusions for Abating Heat Transfer in Steel Reinforced Concrete Columns.
by:
(Language materials, printed)
Reduced Order Modeling For The Nonlinear Geometric Response Of A Curved Beam.
by:
(Language materials, printed)
Testing and characterization of second-order differential microphones.
by:
(Language materials, printed)
Analyzing and improving viscoelastic properties of high density polyethylene.
by:
(Language materials, printed)
Dynamic gearbox simulation for fault diagnostics using a torque transducer.
by:
(Language materials, printed)
An experimental investigation of a hydrogen oxygen flame steam generator.
by:
(Language materials, printed)
Computational design of swash plate type axial piston pumps a framework for computational design.
by:
(Language materials, printed)
Manoeuvring unmanned vehicles through confined three-dimensional environments using Model Predictive Control.
by:
(Language materials, printed)
Analysis and Modeling of Planetary Gearbox Vibration Data for Early Fault Detection.
by:
(Language materials, printed)
A Learning-Based Semi-Autonomous Control Architecture for Robotic Exploration of Search and Rescue Environments.
by:
(Language materials, printed)
Experimental Investigation of the Wankel Engine for Extending the Range of Electric Vehicles.
by:
(Language materials, printed)
Design, Construction, and Testing of a Model Hydrokinetic Prototype.
by:
(Language materials, printed)
Battery characterization and optimization for use in plug-in hybrid electric vehicles: Hardware-in-the-loop duty cycle testing.
by:
(Language materials, printed)
Gear fault detection using non-contact magnetic rotation position sensors.
by:
(Language materials, printed)
The role of twinning in the initiation of fracture in AM30 and AZ61 magnesium alloys.
by:
(Language materials, printed)
Bone fracture prediction using computed tomography based rigidity analysis and the finite element method.
by:
(Language materials, printed)
Show more
Fewer
Subjects