Structural Materials.

Introduction to frustrated magnetism = materials, experiments, theory / by: (Language materials, printed)

Concrete fracture models and applications by: (Language materials, printed)

Modelling of corroding concrete structures = Proceedings of the Joint fib-RILEM Workshop held in Madrid, Spain, 22-23 November 2010 / by: (Language materials, printed)

Supplementary cementing materials by: (Language materials, printed)

Bonded cement-based material overlays for the repair, the lining or the strengthening of slabs or pavements = state-of-the-art report of the RILEM Technical Committee 193-RLS / by: (Language materials, printed)

Atomic scale characterization and first-principles studies of Si3N4 interfaces by: (Language materials, printed)

Sustainable automotive technologies 2011 = proceedings of the 3rd International Conference / by: (Language materials, printed)

Piezoelectricity = evolution and future of a technology / by: (Language materials, printed)

Multiscale Modeling and Simulation of Composite Materials and Structures by: (Language materials, printed)

Eco-efficient construction and building materials by: (Language materials, printed)

Computational techniques for structural health monitoring by: (Language materials, printed)

ICAF 2011 structural integrity = influence of efficiency and green imperatives : proceedings of the 26th Symposium of the International Committee on Aeronautical Fatigue, Montreal, Canada, 1-3 June 2011 / by: (Language materials, printed)

Ceramic and Glass Materials = Structure, Properties and Processing / by: (Language materials, printed)

Self-Consistent Methods for Composites. Vol. 2. Wave Propagation in Heterogeneous Materials / by: (Language materials, printed)

Injection molding = integration of theory and modeling methods / by: (Language materials, printed)

Self-Consistent Methods for Composites = Vol.1: Static Problems / by: (Language materials, printed)

Nanohybridization of organic-inorganic materials by: (Language materials, printed)

Multifunctional metallic hollow sphere structures = manufacturing, properties and application / by: (Language materials, printed)

Identification of damage using Lamb waves = from fundamentals to applications / by: (Language materials, printed)

The science of construction materials by: (Language materials, printed)

Crystallography of quasicrystals = concepts, methods and structures / by: (Language materials, printed)

Ferroelectric crystals for photonic applications = including nanoscale fabrication and characterization techniques / by: (Language materials, printed)

The mathematics and topology of fullerenes by: (Language materials, printed)

Numerical modeling of concrete cracking by: (Language materials, printed)

Fractal analysis in machining by: (Language materials, printed)

Microstructured materials = inverse problems / by: (Language materials, printed)

Piezoelectricity = evolution and future of a technology / by: (Language materials, printed)

A conceptual model for designing recycled aggregate concrete for structural applications by: (Language materials, printed)

Bridges = analysis, design, structural health monitoring, and rehabilitation / by: (Language materials, printed)

Science of crystal structures = highlights in crystallography / by: (Language materials, printed)

Adaptive, tolerant and efficient composite structures by: (Language materials, printed)

Hygrothermal behavior, building pathology and durability by: (Language materials, printed)

Isotopes in condensed matter by: (Language materials, printed)

Sintering = mechanisms of convention nanodensification and field assisted processes / by: (Language materials, printed)

Corrosion of constructional steels in marine and industrial environment = frontier work in atmospheric corrosion / by: (Language materials, printed)

Imaging methods for novel materials and challenging applications. = Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics /. Volume 3 by: (Language materials, printed)

Nondestructive testing of materials and structures = proceedings of NDTMS-2011, Istanbul, Turkey / by: (Language materials, printed)

Strain hardening cement composites: Structural design and performance = State-of-the-art report of the RILEM Technical Committee 208-HFC, SC3 / by: (Language materials, printed)

Green manufacturing processes and systems by: (Language materials, printed)

Effective electron mass in low-dimensional semiconductors by: (Language materials, printed)

Nuclear rocket engine reactor by: (Language materials, printed)

High interstitial stainless austenitic steels by: (Language materials, printed)

Proceedings of the FISITA 2012 World Automotive Congress.. Volume 7,. Vehicle design and testing (I) by: (Language materials, printed)

Progress of recycling in the built environment = Final report of the RILEM Technical Committee 217-PRE / by: (Language materials, printed)

Progress in advanced structural and functional materials design by: (Language materials, printed)

Acoustic metamaterials = negative refraction, imaging, lensing and cloaking / by: (Language materials, printed)

Recycled aggregate in concrete = use of industrial, construction and demolition waste / by: (Language materials, printed)

Performance of cement-based materials in aggressive aqueous environments by: (Language materials, printed)

Steels = from materials science to structural engineering / by: (Language materials, printed)

Principles of loads and failure mechanisms = applications in maintenance, reliability and design / by: (Language materials, printed)

Handbook of technical diagnostics = fundamentals and application to structures and systems / by: (Language materials, printed)

Applied acoustics = concepts, absorbers, and silencers for acoustical comfort and noise control: Alternative solutions - Innovative tools - Practical examples / by: (Language materials, printed)

Production of advanced materials by methods of self-propagating high-temperature synthesis by: (Language materials, printed)

New trends in structural health monitoring by: (Language materials, printed)

Effective properties of heterogeneous materials by: (Language materials, printed)

Nanostructured materials for magnetoelectronics by: (Language materials, printed)

Heat and mass transfer intensification and shape optimization = A Multi-scale Approach / by: (Language materials, printed)

Micromechanisms of friction and wear = introduction to relativistic tribology / by: (Language materials, printed)

Aperiodic crystals by: (Language materials, printed)

Guide to Diagnosis and Appraisal of AAR Damage to Concrete in Structures.. Part 1,. Diagnosis (AAR 6.1) by: (Language materials, printed)

Self-healing phenomena in cement-based materials = State-of-the-Art Report of RILEM Technical Committee 221-SHC: Self-Healing Phenomena in Cement-Based Materials / by: (Language materials, printed)

Double-gyroid-structured functional materials = synthesis and applications / by: (Language materials, printed)

Optical properties of advanced materials by: (Language materials, printed)

Kenaf = a multi-purpose crop for several industrial applications : new insights from the Biokenaf Project / by: (Language materials, printed)

Thermoelectric nanomaterials = materials design and applications / by: (Language materials, printed)

Uranium processing and properties by: (Language materials, printed)

Durability of building materials and components by: (Language materials, printed)

Drilling of polymer-matrix composites by: (Language materials, printed)

Springer handbook of nanomaterials by: (Language materials, printed)

Reinforced polymer matrix syntactic foams = effect of nano and micro-scale reinforcement / by: (Language materials, printed)

Dynamic localization phenomena in elasticity, acoustics and electromagnetism by: (Language materials, printed)

Dispersion forces I = macroscopic quantum electrodynamics and ground-state Casimir, Casimir-Polder and van der Waals Forces / by: (Language materials, printed)

Microstructure and properties of high-temperature superconductors by: (Language materials, printed)

Modelling of powder die compaction by: (Language materials, printed)

The physics of ferromagnetism by: (Language materials, printed)

Manganese in powder metallurgy steels by: (Language materials, printed)

Structural nanocomposites = perspectives for future applications / by: (Language materials, printed)

Thermo-fluid behaviour of periodic cellular metals by: (Language materials, printed)

Disorder and strain-induced complexity in functional materials by: (Language materials, printed)

Fatigue of beta processed and beta heat-treated titanium alloys by: (Language materials, printed)

Heterogeneous ferroelectric solid solutions = phases and domain states / by: (Language materials, printed)

Advances in modeling concrete service life = proceedings of 4th International RILEM PhD Workshop held in Madrid, Spain, November19, 2010 / by: (Language materials, printed)

Scale invariance = from phase transitions to turbulence / by: (Language materials, printed)

Theory of arched structures = strength, stability, vibration / by: (Language materials, printed)

Constitutive modelling in geomechanics = introduction / by: (Language materials, printed)

Fracture mechanics by: (Language materials, printed)

Application of super absorbent polymers (SAP) in concrete construction = State-of-the-Art report prepared by Technical Committee 225-SAP / by: (Language materials, printed)

Non-destructive assessment of concrete structures = reliability and limits of single and combined techniques : state-of-the-art report of the RILEM Technical Committee 207-INR / by: (Language materials, printed)

Structural connections for lightweight metallic structures by: (Language materials, printed)

Unconventional superconductors = anisotropy and multiband effects / by: (Language materials, printed)

Phase change in mechanics by: (Language materials, printed)

The virtual fields method = extracting constitutive mechanical parameters from full-field deformation measurements / by: (Language materials, printed)

Femtosecond laser micromachining = photonic and microfluidic devices in transparent materials / by: (Language materials, printed)

Fatigue of structures and materials by: (Language materials, printed)

IUTAM symposium on mechanical properties of cellular materials = proceedings of the IUTAM Symposium on Mechanical Properties of Cellular Materials, held September 17-20, 2007, LMT-Cachan, Cachan, France / by: (Language materials, printed)

Engineering against fracture = proceedings of the 1st conference / by: (Language materials, printed)

Ultra-fine grained steels by: (Language materials, printed)

Nonlinear solid mechanics by: (Language materials, printed)

Mechanics of microstructured solids = cellular materials, fibre reinforced solids and soft tissues / by: (Language materials, printed)

Biologically inspired design = computational methods and tools / by: (Language materials, printed)

Blast mitigation = experimental and numerical studies / by: (Language materials, printed)

Theory of electroelasticity by: (Language materials, printed)

Direct methods for limit states in structures and materials by: (Language materials, printed)

Stone cladding engineering by: (Language materials, printed)

Engineering viscoelasticity by: (Language materials, printed)

Structural rehabilitation of old buildings by: (Language materials, printed)

Materials and joints in timber structures = recent developments of technology / by: (Language materials, printed)

Biotechnology of silk by: (Language materials, printed)

Peridynamic theory and its applications by: (Language materials, printed)

Compressive force-path method = unified ultimate limit-state design of concrete structures / by: (Language materials, printed)

Modeling of carbon nanotubes, graphene and their composites by: (Language materials, printed)

New composite materials = selection, design, and application / by: (Language materials, printed)

Introduction to solid mechanics = an integrated approach / by: (Language materials, printed)

Alkali activated materials = state-of-the-art report, RILEM TC 224-AAM / by: (Language materials, printed)

Injection technologies for the repair of damaged concrete structures by: (Language materials, printed)

Construction and building research by: (Language materials, printed)

InCIEC 2013 = proceedings of the International Civil and Infrastructure Engineering Conference 2013 / by: (Language materials, printed)

Mechanical properties of self-compacting concrete = state-of-the-art report of the RILEM technical committee 228-MPS on mechanical properties of self-compacting concrete / by: (Language materials, printed)

Waste energy harvesting = mechanical and thermal energies / by: (Language materials, printed)

Simulation of fresh concrete flow = state-of-the art report of the RILEM technical committee 222-SCF / by: (Language materials, printed)

RILEM Technical Committee 195-DTD recommendation for test methods for AD and TD of early age concrete = round robin documentation report: program, test results and statistical evaluation / by: (Language materials, printed)

Microstructuring of thermo-mechanically highly stressed surfaces = final report of the DFG Research Group 576 / by: (Language materials, printed)

Handbook of damage mechanics = nano to macro scale for materials and structures / by: (Language materials, printed)

Service life prediction of exterior plastics = vision for the future / by: (Language materials, printed)

Large floating structures = technological advances / by: (Language materials, printed)

Built heritage = monitoring conservation management / by: (Language materials, printed)

Durability of reinforced concrete from composition to protection = selected papers of the 6th International RILEM PhD Workshop held in Delft, The Netherlands, July 4-5, 2013 / by: (Language materials, printed)

Prediction of polymeric membrane separation and purification performances = a combined mechanical, chemical and thermodynamic model for organic systems / by: (Language materials, printed)

Stochastic modeling of thermal fatigue crack growth by: (Language materials, printed)

Nonlinear, tunable and active metamaterials by: (Language materials, printed)

Biological materials of marine origin = vertebrates / by: (Language materials, printed)

Porous carbons - hyperbranched polymers - polymer solvation by: (Language materials, printed)

On shear behavior of structural elements made of steel fiber reinforced concrete by: (Language materials, printed)

Fire-resistant geopolymers = role of fibres and fillers to enhance thermal properties / by: (Language materials, printed)

Advances in structural engineering.. Volume three. Materials. by: (Language materials, printed)

Advances in structural engineering.. Volume one. Mechanics. by: (Language materials, printed)

Advances in structural engineering.. Volume two. Dynamics. by: (Language materials, printed)

Auxetic materials and structures by: (Language materials, printed)

Direct methods for limit and shakedown analysis of structures = advanced computational algorithms and material modelling / by: (Language materials, printed)

Drying and energy technologies by: (Language materials, printed)

Design and analysis of reinforced fiber composites by: (Language materials, printed)

Advanced semiconducting materials and devices by: (Language materials, printed)

Application of data mining techniques in the analysis of indoor hygrothermal conditions by: (Language materials, printed)

Computer aided seismic and fire retrofitting analysis of existing high rise reinforced concrete buildings by: (Language materials, printed)

Design procedures for the use of composites in strengthening of reinforced concrete structures = state-of-the-art report of the RILEM Technical Committee 234-DUC / by: (Language materials, printed)

Tribology in sheet rolling technology by: (Language materials, printed)

Magnetic interactions in molecules and solids by: (Language materials, printed)

External thermal insulation composite systems (ETICS) = an evaluation of hygrothermal behaviour / by: (Language materials, printed)

Energy performance of buildings = energy efficiency and built environment in temperate climates / by: (Language materials, printed)

Materials with internal structure = multiscale and multifield modeling and simulation / by: (Language materials, printed)

RRILEM recommendations for the prevention of damage by alkali-aggregate reactions in new concrete structures = state-of-the-art report of the RILEM Technical Committee 219-ACS / by: (Language materials, printed)

Performance-based specifications and control of concrete durability = state-of-the-art report RILEM TC 230-PSC / by: (Language materials, printed)

The automated design of materials far from equilibrium by: (Language materials, printed)

Estimating fatality rates for earthquake loss models by: (Language materials, printed)

Aluminum matrix composites reinforced with alumina nanoparticles by: (Language materials, printed)

Materials research for manufacturing = an industrial perspective of turning materials into new products / by: (Language materials, printed)

Fundamentals of structural engineering by: (Language materials, printed)

Seismic behavior of steel storage pallet racking systems by: (Language materials, printed)

Practical acoustic emission testing by: (Language materials, printed)

Natural fibres = advances in science and technology towards industrial applications :: from science to market / by: (Language materials, printed)

Terminal Ballistics by: (Language materials, printed)

Recent developments in building diagnosis techniques by: (Language materials, printed)

Petrographic atlas = characterisation of aggregates regarding potential reactivity to alkalis : RILEM TC 219-ACS recommended guidance AAR-1.2, for use with the RILEM AAR-1.1 petrographic examination method / by: (Language materials, printed)

New approaches to building pathology and durability by: (Language materials, printed)

Sustainable construction = building performance simulation and asset and maintenance management / by: (Language materials, printed)

Advances in fluid-structure interaction = updated contributions reflecting new findings presented at the ERCOFTAC Symposium on Unsteady Separation in Fluid-Structure Interaction, 17-21 June 2013, St. John Resort, Mykonos, Greece / by: (Language materials, printed)

Case studies of building pathology in cultural heritage by: (Language materials, printed)

Commercial aircraft composite technology by: (Language materials, printed)

Innovative AE and NDT techniques for on-site measurement of concrete and masonry structures = state-of-the-art report of the RILEM Technical Committee 239-MCM / by: (Language materials, printed)

Advanced methods of continuum mechanics for materials and structures by: (Language materials, printed)

Dynamics of smart systems and structures = concepts and applications / by: (Language materials, printed)

Fire resistance in American heavy timber construction = history and preservation / by: (Language materials, printed)

Fatigue crack growth = detect - assess - avoid / by: (Language materials, printed)

InCIEC 2015 = proceedings of the International Civil and Infrastructure Engineering Conference / by: (Language materials, printed)

Triboluminescence = theory, synthesis, and application / by: (Language materials, printed)

Discrete optimization in architecture = architectural & urban layout / by: (Language materials, printed)

Historical earthquake-resistant timber framing in the Mediterranean area = HEaRT 2015 / by: (Language materials, printed)

Sustainability improvements in the concrete industry = use of recycled materials for structural concrete production / by: (Language materials, printed)

Biocompatible glasses = from bone regeneration to cancer treatment / by: (Language materials, printed)

Fatigue of Materials II = advances and emergences in understanding : proceedings of a symposium sponsored by Mechanical Behavior Committee of the Minerals, Metals & Materials Society (TMS) and ASM International held during Materials Science & Technology 2012 (MS&T' 12) October 7-11, 2012 in Pittsburgh, Pennsylvania / by: (Language materials, printed)

3D MS = proceedings of the 2nd International Congress on 3D Materials Science : held by June 29-July 2, 2014, L'Imperial Palace, Annecy, France / by: (Language materials, printed)

Diffusion in solids by: (Language materials, printed)

Proceedings of the 1st International Conference on 3D Materials Science = held July 8-12, 2012, Seven Springs Mountain Resort, Seven Springs, Pennsylvania, USA / by: (Language materials, printed)

Concrete durability = cementitious materials and reinforced concrete properties, behavior and corrosion resistance / by: (Language materials, printed)

A little book about BIG chemistry = the story of man-made polymers / by: (Language materials, printed)

Reinforced concrete design to Eurocode 2 by: (Language materials, printed)

Recent advances on green concrete for structural purposes = the contribution of the EU-FP7 Project EnCoRe / by: (Language materials, printed)

An introduction to the mathematical theory of dynamic materials by: (Language materials, printed)

Deformation and fracture behaviour of polymer materials by: (Language materials, printed)

Bamboo = the multipurpose plant / by: (Language materials, printed)

Advanced materials = techniques, physics, mechanics and applications / by: (Language materials, printed)

GraphITA = selected papers from the Workshop on Synthesis, Characterization and Technological Exploitation of Graphene and 2D Materials Beyond Graphene / by: (Language materials, printed)

Tetrahedrally bonded amorphous carbon films I = basics, structure and preparation / by: (Language materials, printed)

Heterogeneous ferroelectric solid solutions = phases and domain states / by: (Language materials, printed)

Insights into the chemistry of organic structure-directing agents in the synthesis of zeolitic materials by: (Language materials, printed)

Structural chemistry = principles, methods, and case studies / by: (Language materials, printed)

International Congress on Polymers in Concrete (ICPIC 2018) = polymers for resilient and sustainable concrete infrastructure / by: (Language materials, printed)

Engineering mechanics.. 2,. Mechanics of materials by: (Language materials, printed)

Fractography and failure analysis by: (Language materials, printed)

Thermal protection modeling of hypersonic flying apparatus by: (Language materials, printed)

Coherent structures in granular crystals = from experiment and modelling to computation and mathematical analysis / by: (Language materials, printed)

High performance structural materials = proceedings of Chinese Materials Conference 2017 / by: (Language materials, printed)

Proceedings of Italian Concrete Days 2016 by: (Language materials, printed)

Trends in applications of mathematics to mechanics by: (Language materials, printed)

Progress in materials science and engineering by: (Language materials, printed)

An introduction to structural mechanics for architects by: (Language materials, printed)

Optical phenomenology and applications = health monitoring for infrastructure materials and the environment / by: (Language materials, printed)

Mechanisms of cracking and debonding in asphalt and composite pavements = state-of-the-art of the RILEM TC 241-MCD / by: (Language materials, printed)

Advanced materials = proceedings of the International Conference on "Physics and Mechanics of New Materials and Their Applications", PHENMA 2017 / by: (Language materials, printed)

The selected models of the mesostructure of composites = percolation, clusters, force fields / by: (Language materials, printed)

Stringer-panel models in structural concrete = applied to D-region design / by: (Language materials, printed)

Chemical thermodynamics in materials science = from basics to practical applications / by: (Language materials, printed)

Field-assisted sintering = science and applications / by: (Language materials, printed)

Structure and reactivity of metals in zeolite materials by: (Language materials, printed)

Polysaccharide based hybrid materials = metals and metal oxides, graphene and carbon nanotubes / by: (Language materials, printed)

Topology in magnetism by: (Language materials, printed)

Metal matrix composites = wetting and infiltration / by: (Language materials, printed)

Solidification processing of metallic alloys under external fields by: (Language materials, printed)

Fatigue of materials at very high numbers of loading cycles = experimental techniques, mechanisms, modeling and fatigue life assessment / by: (Language materials, printed)

10th International Symposium on the Conservation of Monuments in the Mediterranean Basin = natural and anthropogenic hazards and sustainable preservation / by: (Language materials, printed)

Lock-in thermography = basics and use for evaluating electronic devices and materials / by: (Language materials, printed)

Thin-walled laminated structures = buckling, vibrations and their suppression / by: (Language materials, printed)

Environmentally friendly zeolites = synthesis and source materials / by: (Language materials, printed)

Glassy nuclei in amorphous ice = novel evidence for the two-liquids nature of water / by: (Language materials, printed)

Proceedings of the Second International Conference on Theoretical, Applied and Experimental Mechanics by: (Language materials, printed)

Handbook on concrete block paving by: (Language materials, printed)

Mechanical properties of silicon based compounds = silicides / by: (Language materials, printed)

Dense and green building typologies = design perspectives / by: (Language materials, printed)

Advanced materials = proceedings of the International Conference on "Physics and Mechanics of New Materials and Their Applications", PHENMA 2018 / by: (Language materials, printed)

Simplified theory of plastic zones = based on Zarka's method / by: (Language materials, printed)

The pre-fabrication of building facades by: (Language materials, printed)

Concrete structures by: (Language materials, printed)

Overhead lines by: (Language materials, printed)

Challenges in mechanics of time dependent materials. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 2 by: (Language materials, printed)

Advances on mechanics, design engineering and manufacturing = proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2016), 14-16 September, 2016, Catania, Italy / by: (Language materials, printed)

Discrete optimization in architecture = building envelope / by: (Language materials, printed)

Jute geotextiles and their applications in civil engineering by: (Language materials, printed)

Discontinuous-fibre reinforced composites = fundamentals of stress transfer and fracture mechanics / by: (Language materials, printed)

Aluminum and magnesium metal matrix nanocomposites by: (Language materials, printed)

Construction biotechnology = biogeochemistry, microbiology and biotechnology of construction materials and processes / by: (Language materials, printed)

Prognostics and health management of engineering systems = an introduction / by: (Language materials, printed)

Steel fiber reinforced concrete = behavior, modelling and design / by: (Language materials, printed)

Avalanches in functional materials and geophysics by: (Language materials, printed)

Information materials = smart materials for adaptive architecture / by: (Language materials, printed)

Powder consolidation using cold spray = process modeling and emerging applications / by: (Language materials, printed)

Aerospace materials and material technologies.. Volume 1,. Aerospace materials by: (Language materials, printed)

Aerospace materials and material technologies.. Volume 2,. Aerospace material technologies by: (Language materials, printed)

Smart structures and materials = selected papers from the 7th ECCOMAS Thematic Conference on Smart Structures and Materials / by: (Language materials, printed)

Creep behaviour in cracked sections of fibre reinforced concrete = proceedings of the International RILEM Workshop FRC-CREEP 2016 / by: (Language materials, printed)

Durability of critical infrastructure, monitoring and testing = proceedings of the ICDCF 2016 / by: (Language materials, printed)

Rare metal technology 2017 by: (Language materials, printed)

Mechanical and creep behavior of advanced materials = a SMD symposium honoring Professor K. Linga Murty / by: (Language materials, printed)

Characterization of minerals, metals, and materials 2017 by: (Language materials, printed)

Development of recycled polypropylene plastic fibres to reinforce concrete by: (Language materials, printed)

Functionally graded materials by: (Language materials, printed)

Flows in Polymers, Reinforced Polymers and Composites = A Multi-Scale Approach / by: (Language materials, printed)

Fabrication of Heat-Resistant and Plastic-Formable Silicon Nitride by: (Language materials, printed)

Service Life Prediction of Exterior Plastics = Vision for the Future / by: (Language materials, printed)

Nonlinear, Tunable and Active Metamaterials by: (Language materials, printed)

Built Heritage: Monitoring Conservation Management by: (Language materials, printed)

Porous Carbons – Hyperbranched Polymers – Polymer Solvation by: (Language materials, printed)

Molecular Dynamics Simulations of Disordered Materials = From Network Glasses to Phase-Change Memory Alloys / by: (Language materials, printed)

Microstructuring of Thermo-Mechanically Highly Stressed Surfaces = Final Report of the DFG Research Group 576 / by: (Language materials, printed)

Lanthanide Single Molecule Magnets by: (Language materials, printed)

Auxetic Materials and Structures by: (Language materials, printed)

Stochastic Modeling of Thermal Fatigue Crack Growth by: (Language materials, printed)

Materials for Construction and Civil Engineering = Science, Processing, and Design / by: (Language materials, printed)

Advances in Structural Engineering = Mechanics, Volume One / by: (Language materials, printed)

Advances in Structural Engineering = Materials, Volume Three / by: (Language materials, printed)

Bridges = Analysis, Design, Structural Health Monitoring, and Rehabilitation / by: (Language materials, printed)

Handbook of Damage Mechanics = Nano to Macro Scale for Materials and Structures / by: (Language materials, printed)

Large Floating Structures = Technological Advances / by: (Language materials, printed)

Integrierte Schadenanalyse = Technikgestaltung und das System des Versagens / by: (Language materials, printed)

PCM-Enhanced Building Components = An Application of Phase Change Materials in Building Envelopes and Internal Structures / by: (Language materials, printed)

RILEM Technical Committee 195-DTD Recommendation for Test Methods for AD and TD of Early Age Concrete = Round Robin Documentation Report: Program, Test Results and Statistical Evaluation / by: (Language materials, printed)

Advances in Structural Engineering = Dynamics, Volume Two / by: (Language materials, printed)

Direct Methods for Limit and Shakedown Analysis of Structures = Advanced Computational Algorithms and Material Modelling / by: (Language materials, printed)

Einführung in die bruchmechanische Schadensbeurteilung by: (Language materials, printed)

Calcined Clays for Sustainable Concrete = Proceedings of the 1st International Conference on Calcined Clays for Sustainable Concrete / by: (Language materials, printed)

Prediction of Polymeric Membrane Separation and Purification Performances = A Combined Mechanical, Chemical and Thermodynamic Model for Organic Systems / by: (Language materials, printed)

Nanotechnology in Construction = Proceedings of NICOM5 / by: (Language materials, printed)

Fire-Resistant Geopolymers = Role of Fibres and Fillers to Enhance Thermal Properties / by: (Language materials, printed)

A Conceptual Model for Designing Recycled Aggregate Concrete for Structural Applications by: (Language materials, printed)

Mechanical and Materials Engineering of Modern Structure and Component Design by: (Language materials, printed)

Biological Materials of Marine Origin = Vertebrates / by: (Language materials, printed)

Durability of Reinforced Concrete from Composition to Protection = Selected Papers of the 6th International RILEM PhD Workshop held in Delft, The Netherlands, July 4-5, 2013 / by: (Language materials, printed)

Furniture Design by: (Language materials, printed)

Science of Crystal Structures = Highlights in Crystallography / by: (Language materials, printed)

Kristallstrukturbestimmung by: (Language materials, printed)

Design and Modeling of Mechanical Systems - II = Proceedings of the Sixth Conference on Design and Modeling of Mechanical Systems, CMSM'2015, March 23-25, Hammamet, Tunisia / by: (Language materials, printed)

On Shear Behavior of Structural Elements Made of Steel Fiber Reinforced Concrete by: (Language materials, printed)

Synthesis, Properties and Application of Graphene Woven Fabrics by: (Language materials, printed)

Reliability of Steel Columns Protected by Intumescent Coatings Subjected to Natural Fires by: (Language materials, printed)

Plastic Tests Plastics = A Toy Brick Tensometer for Electromechanical Characterization of Elastomers / by: (Language materials, printed)

InCIEC 2014 = Proceedings of the International Civil and Infrastructure Engineering Conference 2014 / by: (Language materials, printed)

Electrochemically Engineered Nanoporous Materials = Methods, Properties and Applications / by: (Language materials, printed)

Triboluminescence = Theory, Synthesis, and Application / by: (Language materials, printed)

Computer Aided Seismic and Fire Retrofitting Analysis of Existing High Rise Reinforced Concrete Buildings by: (Language materials, printed)

RILEM Recommendations for the Prevention of Damage by Alkali-Aggregate Reactions in New Concrete Structures = State-of-the-Art Report of the RILEM Technical Committee 219-ACS / by: (Language materials, printed)

Petrographic Atlas: Characterisation of Aggregates Regarding Potential Reactivity to Alkalis = RILEM TC 219-ACS Recommended Guidance AAR-1.2, for Use with the RILEM AAR-1.1 Petrographic Examination Method / by: (Language materials, printed)

Biocompatible Glasses = From Bone Regeneration to Cancer Treatment / by: (Language materials, printed)

Advanced Semiconducting Materials and Devices by: (Language materials, printed)

Magnetic Interactions in Molecules and Solids by: (Language materials, printed)

The Automated Design of Materials Far From Equilibrium by: (Language materials, printed)

Application of Data Mining Techniques in the Analysis of Indoor Hygrothermal Conditions by: (Language materials, printed)

Recent Developments in Building Diagnosis Techniques by: (Language materials, printed)

Advanced Methods of Continuum Mechanics for Materials and Structures by: (Language materials, printed)

External Thermal Insulation Composite Systems (ETICS) = An Evaluation of Hygrothermal Behaviour / by: (Language materials, printed)

Fire Resistance in American Heavy Timber Construction = History and Preservation / by: (Language materials, printed)

1st International Conference on 3D Materials Science, 2012 = Conference Proceedings / by: (Language materials, printed)

Historical Earthquake-Resistant Timber Framing in the Mediterranean Area = HEaRT 2015 / by: (Language materials, printed)

Advances in Fluid-Structure Interaction = Updated contributions reflecting new findings presented at the ERCOFTAC Symposium on Unsteady Separation in Fluid-Structure Interaction, 17-21 June 2013, St John Resort, Mykonos, Greece / by: (Language materials, printed)

Diffusion in Solids by: (Language materials, printed)

Estimating Fatality Rates for Earthquake Loss Models by: (Language materials, printed)

Seismic Behavior of Steel Storage Pallet Racking Systems by: (Language materials, printed)

Materials with Internal Structure = Multiscale and Multifield Modeling and Simulation / by: (Language materials, printed)

Case Studies of Building Pathology in Cultural Heritage by: (Language materials, printed)

Performance-Based Specifications and Control of Concrete Durability = State-of-the-Art Report RILEM TC 230-PSC / by: (Language materials, printed)

Sustainability Improvements in the Concrete Industry = Use of Recycled Materials for Structural Concrete Production / by: (Language materials, printed)

InCIEC 2015 = Proceedings of the International Civil and Infrastructure Engineering Conference / by: (Language materials, printed)

Dynamics of Smart Systems and Structures = Concepts and Applications / by: (Language materials, printed)

Practical Acoustic Emission Testing by: (Language materials, printed)

Drying and Energy Technologies by: (Language materials, printed)

Fatigue Crack Growth = Detect - Assess - Avoid / by: (Language materials, printed)

Innovative AE and NDT Techniques for On-Site Measurement of Concrete and Masonry Structures = State-of-the-Art Report of the RILEM Technical Committee 239-MCM / by: (Language materials, printed)

Discrete Optimization in Architecture = Architectural & Urban Layout / by: (Language materials, printed)

Energy Performance of Buildings = Energy Efficiency and Built Environment in Temperate Climates / by: (Language materials, printed)

Sustainable Construction = Building Performance Simulation and Asset and Maintenance Management / by: (Language materials, printed)

New Approaches to Building Pathology and Durability by: (Language materials, printed)

Design and Analysis of Reinforced Fiber Composites by: (Language materials, printed)

Commercial Aircraft Composite Technology by: (Language materials, printed)

8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials by: (Language materials, printed)

Fatigue of Materials II = Advances and Emergences in Understanding / by: (Language materials, printed)

Aluminum Matrix Composites Reinforced with Alumina Nanoparticles by: (Language materials, printed)

Terminal Ballistics by: (Language materials, printed)

Sicherheitsbewertung von Composite-Druckgasbehältern = Potential statistischer Methoden jenseits aktueller Vorschriften / by: (Language materials, printed)

Materials Research for Manufacturing = An Industrial Perspective of Turning Materials into New Products / by: (Language materials, printed)

Design Procedures for the Use of Composites in Strengthening of Reinforced Concrete Structures = State-of-the-Art Report of the RILEM Technical Committee 234-DUC / by: (Language materials, printed)

Tribology in Sheet Rolling Technology by: (Language materials, printed)

The 2nd International Congress on 3D Materials Science = Congress Proceedings / by: (Language materials, printed)

Fundamentals of Structural Engineering by: (Language materials, printed)

Natural Fibres: Advances in Science and Technology Towards Industrial Applications = From Science to Market / by: (Language materials, printed)

Fatigue of Materials at Very High Numbers of Loading Cycles = Experimental Techniques, Mechanisms, Modeling and Fatigue Life Assessment / by: (Language materials, printed)

Solidification Processing of Metallic Alloys Under External Fields by: (Language materials, printed)

Viscoelastic Properties of Asphalts Based on Penetration and Softening Point by: (Language materials, printed)

Buckling and Postbuckling of Beams, Plates, and Shells by: (Language materials, printed)

Composite Materials Engineering, Volume 2 = Different Types of Composite Materials / by: (Language materials, printed)

Field-Assisted Sintering = Science and Applications / by: (Language materials, printed)

Lock-in Thermography = Basics and Use for Evaluating Electronic Devices and Materials / by: (Language materials, printed)

Proceedings of Italian Concrete Days 2016 by: (Language materials, printed)

Metal Matrix Composites = Wetting and Infiltration / by: (Language materials, printed)

10th International Symposium on the Conservation of Monuments in the Mediterranean Basin = Natural and Anthropogenic Hazards and Sustainable Preservation / by: (Language materials, printed)

Polysaccharide Based Hybrid Materials = Metals and Metal Oxides, Graphene and Carbon Nanotubes / by: (Language materials, printed)

Structure and Reactivity of Metals in Zeolite Materials by: (Language materials, printed)

Topology in Magnetism by: (Language materials, printed)

Methods of Measuring Moisture in Building Materials and Structures = State-of-the-Art Report of the RILEM Technical Committee 248-MMB / by: (Language materials, printed)

Advanced Methods and Technologies in Metallurgy in Russia by: (Language materials, printed)

Heterogeneous Ferroelectric Solid Solutions = Phases and Domain States / by: (Language materials, printed)

Proceedings of the 17th International Conference on New Trends in Fatigue and Fracture by: (Language materials, printed)

Chemical Thermodynamics in Materials Science = From Basics to Practical Applications / by: (Language materials, printed)

High Tech Concrete: Where Technology and Engineering Meet = Proceedings of the 2017 fib Symposium, held in Maastricht, The Netherlands, June 12-14, 2017 / by: (Language materials, printed)

Advances in Computational Plasticity = A Book in Honour of D. Roger J. Owen / by: (Language materials, printed)

International Congress on Polymers in Concrete (ICPIC 2018) = Polymers for Resilient and Sustainable Concrete Infrastructure / by: (Language materials, printed)

Strengthening and Retrofitting of Existing Structures by: (Language materials, printed)

Rare Metal Technology 2018 by: (Language materials, printed)

Wooden Domes = History and Modern Times / by: (Language materials, printed)

High Performance Structural Materials = Proceedings of Chinese Materials Conference 2017 / by: (Language materials, printed)

Coherent Structures in Granular Crystals = From Experiment and Modelling to Computation and Mathematical Analysis / by: (Language materials, printed)

Von Rubinen und Implantaten = Aluminiumoxid und seine vielfältige Welt / by: (Language materials, printed)

Trends in Applications of Mathematics to Mechanics by: (Language materials, printed)

Werkstoffkunde by: (Language materials, printed)

Seismic Fragility Assessment for Buildings due to Earthquake Excitation by: (Language materials, printed)

Progress in Materials Science and Engineering by: (Language materials, printed)

Equivalent Stress Concept for Limit State Analysis by: (Language materials, printed)

Advanced Materials = Proceedings of the International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2017 / by: (Language materials, printed)

An Introduction to Structural Mechanics for Architects by: (Language materials, printed)

Mechanisms of Cracking and Debonding in Asphalt and Composite Pavements = State-of-the-Art of the RILEM TC 241-MCD / by: (Language materials, printed)

Optical Phenomenology and Applications = Health Monitoring for Infrastructure Materials and the Environment / by: (Language materials, printed)

Strukturfarben im Brennpunkt der Bionik = Zwischen Kunst und Naturwissenschaften / by: (Language materials, printed)

Engineering Mechanics 2 = Mechanics of Materials / by: (Language materials, printed)

Tetrahedrally Bonded Amorphous Carbon Films I = Basics, Structure and Preparation / by: (Language materials, printed)

Fractography and Failure Analysis by: (Language materials, printed)

Stringer-Panel Models in Structural Concrete = Applied to D-region Design / by: (Language materials, printed)

The Selected Models of the Mesostructure of Composites = Percolation, Clusters, and Force Fields / by: (Language materials, printed)

An Isogeometric Approach to Beam Structures = Bridging the Classical to Modern Technique / by: (Language materials, printed)

Insights into the Chemistry of Organic Structure-Directing Agents in the Synthesis of Zeolitic Materials by: (Language materials, printed)

Dynamic Behavior of Materials, Volume 1 = Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Thermal Protection Modeling of Hypersonic Flying Apparatus by: (Language materials, printed)

Modeling and Design of Flexible Pavements and Materials by: (Language materials, printed)

Characterization of Minerals, Metals, and Materials 2018 by: (Language materials, printed)

Structural Chemistry = Principles, Methods, and Case Studies / by: (Language materials, printed)

Calcined Clays for Sustainable Concrete = Proceedings of the 2nd International Conference on Calcined Clays for Sustainable Concrete / by: (Language materials, printed)

Composite Materials Engineering, Volume 1 = Fundamentals of Composite Materials / by: (Language materials, printed)

Recycled Aggregate Concrete Structures by: (Language materials, printed)

Nano/Micro-Structured Materials for Energy and Biomedical Applications = Latest Developments, Challenges and Future Directions / by: (Language materials, printed)

Urban Wind Environment = Integrated Climate-Sensitive Planning and Design / by: (Language materials, printed)

Creep and Hygrothermal Effects in Concrete Structures by: (Language materials, printed)

Living Under the Threat of Earthquakes = Short and Long-term Management of Earthquake Risks and Damage Prevention in Nepal / by: (Language materials, printed)

The Ageing of Materials and Structures = Towards Scientific Solutions for the Ageing of Our Assets / by: (Language materials, printed)

Multi-layer Pavement System under Blast Load by: (Language materials, printed)

Vibration Control of Active Structures = An Introduction / by: (Language materials, printed)

Design of Structural Elements with Tropical Hardwoods by: (Language materials, printed)

Plasticity and Fracture by: (Language materials, printed)

Building Performance Evaluation = From Delivery Process to Life Cycle Phases / by: (Language materials, printed)

Service Life and Durability of Reinforced Concrete Structures = Selected Papers of the 8th International RILEM PhD Workshop held in Marne-la-Vallée, France, September 26-27, 2016 / by: (Language materials, printed)

Behavior of Unbounded Post- tensioned Masonry Walls by: (Language materials, printed)

A New Generation Material Graphene: Applications in Water Technology by: (Language materials, printed)

Machining Difficult-to-Cut Materials = Basic Principles and Challenges / by: (Language materials, printed)

Short Fibre Reinforced Cementitious Composites and Ceramics by: (Language materials, printed)

Electronic Waste and Printed Circuit Board Recycling Technologies by: (Language materials, printed)

Thermal Stresses—Advanced Theory and Applications by: (Language materials, printed)

Impact Behavior and Pedestrian Protection of Automotive Laminated Windshield = Theories, Experiments and Numerical Simulations / by: (Language materials, printed)

Structural Performance of Masonry Elements = Mortar Coating Layers Influence / by: (Language materials, printed)

Proceedings of the 7th International Conference on Fracture Fatigue and Wear = FFW 2018, 9-10 July 2018, Ghent University, Belgium / by: (Language materials, printed)

Mechanical Properties of Silicon Based Compounds: Silicides by: (Language materials, printed)

Environmentally Friendly Zeolites = Synthesis and Source Materials / by: (Language materials, printed)

Adhesion in Layered Cement Composites by: (Language materials, printed)

Integrative Approach to Comprehensive Building Renovations by: (Language materials, printed)

Light Weighting for Defense, Aerospace, and Transportation by: (Language materials, printed)

First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018 by: (Language materials, printed)

Antipodal Vivaldi Antennas for Microwave Imaging of Construction Materials and Structures by: (Language materials, printed)

Optical Fiber Sensing and Structural Health Monitoring Technology by: (Language materials, printed)

Mesoscale Models = From Micro-Physics to Macro-Interpretation / by: (Language materials, printed)

Dynamic Behavior of Materials, Volume 1 = Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Dynamic Stability and Bifurcation in Nonconservative Mechanics by: (Language materials, printed)

Computational and Manufacturing Strategies = Experimental Expressions of Wood Capabilities / by: (Language materials, printed)

Rare Metal Technology 2019 by: (Language materials, printed)

Thin-walled Laminated Structures = Buckling, Vibrations and Their Suppression / by: (Language materials, printed)

Design of Reinforced Concrete Silo Groups by: (Language materials, printed)

Environmental Water Footprints = Energy and Building Sectors / by: (Language materials, printed)

Design of Steel Structures to Eurocodes by: (Language materials, printed)

Advanced Materials = Proceedings of the International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2018 / by: (Language materials, printed)

Physical Properties and Behaviour of High-Performance Concrete at High Temperature = State-of-the-Art Report of the RILEM Technical Committee 227-HPB / by: (Language materials, printed)

Dense and Green Building Typologies = Design Perspectives / by: (Language materials, printed)

3D Printing and Additive Manufacturing Technologies by: (Language materials, printed)

Handbook on Concrete Block Paving by: (Language materials, printed)

Bio-based Building Skin by: (Language materials, printed)

Concrete Construction = Practical Problems and Solutions / by: (Language materials, printed)

Simulation and Experiments of Material-Oriented Ultra-Precision Machining by: (Language materials, printed)

Proceedings of the Second International Conference on Theoretical, Applied and Experimental Mechanics by: (Language materials, printed)

Fracture, Fatigue, Failure and Damage Evolution, Volume 6 = Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Polypropylene Handbook = Morphology, Blends and Composites / by: (Language materials, printed)

Museum Technology and Architecture by: (Language materials, printed)

Glassy Nuclei in Amorphous Ice = Novel Evidence for the Two-Liquids Nature of Water / by: (Language materials, printed)

Architectured Materials in Nature and Engineering = Archimats / by: (Language materials, printed)

Structural Materials = Properties and Selection / by: (Language materials, printed)

Modelling of Concrete Behaviour at High Temperature = State-of-the-Art Report of the RILEM Technical Committee 227-HPB / by: (Language materials, printed)

Drying Kinetics in Building Materials and Components = The Interface Influence / by: (Language materials, printed)

Enzymatic Polymerization towards Green Polymer Chemistry by: (Language materials, printed)

Eurocode 2 Design Data for Reinforced Concrete Columns by: (Language materials, printed)

Advances in Materials and Metallurgy = Select Proceedings of ICEMMM 2018 / by: (Language materials, printed)

Incremental Forming as a Rapid Tooling Process by: (Language materials, printed)

Marine Biological Materials of Invertebrate Origin by: (Language materials, printed)

Nocturnal Cooling Technology for Building Applications by: (Language materials, printed)

Metallic Microlattice Structures = Manufacture, Materials and Application / by: (Language materials, printed)

Prestressed Concrete = Building, Design, and Construction / by: (Language materials, printed)

Strukturelle Phasenanalyse von chemischen Prozessadditiven in der Silikat-Industrie = Untersuchung der Wechselwirkung von Alkali-Wassergläsern mit Aluminium-Tetrametaphosphat / by: (Language materials, printed)

Characterization of Minerals, Metals, and Materials 2019 by: (Language materials, printed)

Fatigue Crack Growth Failure and Lifing Analyses for Metallic Aircraft Structures and Components by: (Language materials, printed)

Systematic Approach of Characterisation and Behaviour of Recycled Aggregate Concrete by: (Language materials, printed)

Historic Mortars = Advances in Research and Practical Conservation / by: (Language materials, printed)

Dense and Green Building Typologies = Research, Policy and Practice Perspectives / by: (Language materials, printed)

Active Origami = Modeling, Design, and Applications / by: (Language materials, printed)

Advanced Manufacturing Processes = Selected Papers from the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2019), September 10-13, 2019, Odessa, Ukraine / by: (Language materials, printed)

Mechanics of Wood Machining by: (Language materials, printed)

Engineering Design Applications III = Structures, Materials and Processes / by: (Language materials, printed)

Plasticity, Damage and Fracture in Advanced Materials by: (Language materials, printed)

The Science and Engineering of Mechanical Shock by: (Language materials, printed)

ACMSM25 = Proceedings of the 25th Australasian Conference on Mechanics of Structures and Materials / by: (Language materials, printed)

Proceedings of the International Conference of Sustainable Production and Use of Cement and Concrete = ICSPCC 2019 / by: (Language materials, printed)

Rheology and Processing of Construction Materials = RheoCon2 & SCC9 / by: (Language materials, printed)

Magnesium Technology 2020 by: (Language materials, printed)

Advances in Additive Manufacturing and Joining = Proceedings of AIMTDR 2018 / by: (Language materials, printed)

Second RILEM International Conference on Concrete and Digital Fabrication = Digital Concrete 2020 / by: (Language materials, printed)

Advances in Thick Section Composite and Sandwich Structures = An Anthology of ONR-sponsored Research / by: (Language materials, printed)

Refractories for the Cement Industry by: (Language materials, printed)

Geotechnics for Sustainable Infrastructure Development by: (Language materials, printed)

Proceedings of Italian Concrete Days 2018 by: (Language materials, printed)

Basic Concepts of Iron and Steel Making by: (Language materials, printed)

Aerospace Alloys by: (Language materials, printed)

Terminal Ballistics by: (Language materials, printed)

Advanced Materials = Proceedings of the International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2019 / by: (Language materials, printed)

Proceedings of the 9th International Conference on Maintenance and Rehabilitation of Pavements—Mairepav9 by: (Language materials, printed)

A Review on Dental Materials by: (Language materials, printed)

Polymer Engineering 1 = Einführung, Synthese, Eigenschaften / by: (Language materials, printed)

Leichtbau durch Funktionsintegration by: (Language materials, printed)

Interface Influence on Moisture Transport in Building Components = The Wetting Process / by: (Language materials, printed)

Troubleshooting Finite-Element Modeling with Abaqus = With Application in Structural Engineering Analysis / by: (Language materials, printed)

ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing = Proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, June 2-7, 2019, Krakow, Poland / by: (Language materials, printed)

Leather and Footwear Sustainability = Manufacturing, Supply Chain, and Product Level Issues / by: (Language materials, printed)

Betriebsfestigkeit = Bauteile sicher auslegen! / by: (Language materials, printed)

Shape Memory Alloys for Seismic Resilience by: (Language materials, printed)

A Virtual Testing Approach for Honeycomb Sandwich Panel Joints in Aircraft Interior by: (Language materials, printed)

Operations and Basic Processes in Ironmaking by: (Language materials, printed)

Progress in Digital and Physical Manufacturing = Proceedings of ProDPM'19 / by: (Language materials, printed)

Molecular Simulation on Cement-Based Materials = From Theory to Application / by: (Language materials, printed)

Theoretical Thermotics = Transformation Thermotics and Extended Theories for Thermal Metamaterials / by: (Language materials, printed)

Advances in Structures, Systems and Materials = Select Proceedings of ERCAM 2019 / by: (Language materials, printed)

Mechanics of Strain Gradient Materials by: (Language materials, printed)

Developments and Novel Approaches in Biomechanics and Metamaterials by: (Language materials, printed)

External Sulphate Attack – Field Aspects and Lab Tests = RILEM Final Workshop of TC 251-SRT (Madrid - SPAIN, 2018) / by: (Language materials, printed)

Challenges in Mechanics of Time Dependent Materials, Fracture, Fatigue, Failure and Damage Evolution, Volume 2 = Proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Nonlinear Structures and Systems, Volume 1 = Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics 2019 / by: (Language materials, printed)

Prozesstechnologie zur Herstellung von FVK-Metall-Hybriden = Ergebnisse aus dem BMBF-Verbundprojekt ProVorPlus / by: (Language materials, printed)

Cotton Science and Processing Technology = Gene, Ginning, Garment and Green Recycling / by: (Language materials, printed)

Advances in Industrial Design = Proceedings of the AHFE 2020 Virtual Conferences on Design for Inclusion, Affective and Pleasurable Design, Interdisciplinary Practice in Industrial Design, Kansei Engineering, and Human Factors for Apparel and Textile Engineering, July 16–20, 2020, USA / by: (Language materials, printed)

Mechanical Behavior and Fracture of Engineering Materials by: (Language materials, printed)

Gulf Conference on Sustainable Built Environment by: (Language materials, printed)

Deformation Processes in TRIP/TWIP Steels = In-Situ Characterization Techniques / by: (Language materials, printed)

In-situ Mechanics of Materials = Principles,Tools, Techniques and Applications / by: (Language materials, printed)

Handbook of Damage Mechanics = Nano to Macro Scale for Materials and Structures / by: (Language materials, printed)

CIGOS 2019, Innovation for Sustainable Infrastructure = Proceedings of the 5th International Conference on Geotechnics, Civil Engineering Works and Structures / by: (Language materials, printed)

Proceedings of ARCH 2019 = 9th International Conference on Arch Bridges / by: (Language materials, printed)

Integrierte Produktentwicklung mit Faser-Kunststoff-Verbunden by: (Language materials, printed)

Study of New Ternary Rare-Earth Intermetallic Germanides with Polar Covalent Bonding = Beyond the Zintl Picture / by: (Language materials, printed)

Sustainable Materials in Building Construction by: (Language materials, printed)

WCFS2019 = Proceedings of the World Conference on Floating Solutions / by: (Language materials, printed)

Advances in Structural Engineering = Select Proceedings of FACE 2019 / by: (Language materials, printed)

ICACE 2019 = Selected Articles from the International Conference on Architecture and Civil Engineering / by: (Language materials, printed)

Structural Characterisation of Natural and Industrial Porous Materials: A Manual by: (Language materials, printed)

Handbook of Advanced Ceramics and Composites = Defense, Security, Aerospace and Energy Applications / by: (Language materials, printed)

Acoustic And Non-Acoustic Performance Coal Bottom Ash Concrete by: (Language materials, printed)

Durability and Sustainability of Concrete = Case Studies for Concrete exposures / by: (Language materials, printed)

Chloride-Induced Steel Corrosion in Concrete Under Service Loads by: (Language materials, printed)

Women in Aerospace Materials = Advancements and Perspectives of Emerging Technologies / by: (Language materials, printed)

Mechanics of Metamaterials with Negative Parameters by: (Language materials, printed)

Nonlinear Wave Dynamics of Materials and Structures by: (Language materials, printed)

Conceptual Theories in Structural Dynamics by: (Language materials, printed)

Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites = Design of Tough, Transformation-Strengthened Composites and Structures / by: (Language materials, printed)

Polymer Engineering 3 = Werkstoff- und Bauteilprüfung, Recycling, Entwicklung / by: (Language materials, printed)

Building Pathology, Durability and Service Life by: (Language materials, printed)

Fracture of Materials Under Compression Along Cracks by: (Language materials, printed)

ICSCEA 2019 = Proceedings of the International Conference on Sustainable Civil Engineering and Architecture / by: (Language materials, printed)

Polymer Engineering 2 = Verarbeitung, Oberflächentechnologie, Gestaltung / by: (Language materials, printed)

An Insight Into Metal Based Foams = Processing, Properties and Applications / by: (Language materials, printed)

Developments and Novel Approaches in Nonlinear Solid Body Mechanics by: (Language materials, printed)

Microbially Induced Corrosion and its Mitigation by: (Language materials, printed)

Kontinuierliche kraftflussgerechte Textiltechnologien für Leichtbaustrukturen in Großserie = Ergebnisse aus dem BMBF-Verbundprojekt KonText / by: (Language materials, printed)

Refractories for the Chemical Industries by: (Language materials, printed)

Superalloys 2020 = Proceedings of the 14th International Symposium on Superalloys / by: (Language materials, printed)

Handbook of Advanced Ceramics and Composites = Defense, Security, Aerospace and Energy Applications / by: (Language materials, printed)

Geopolymer and Geopolymer Matrix Composites by: (Language materials, printed)

Advances in Lightweight Materials and Structures = Select Proceedings of ICALMS 2020 / by: (Language materials, printed)

Engineering of Thermoplastic Elastomer with Graphene and Other Anisotropic Nanofillers by: (Language materials, printed)

Hygrothermal Behaviour and Building Pathologies by: (Language materials, printed)

Recent Advances in Layered Materials and Structures by: (Language materials, printed)

Forming the Future = Proceedings of the 13th International Conference on the Technology of Plasticity / by: (Language materials, printed)

Hemp and Sustainability by: (Language materials, printed)

Light Metals 2021 = 50th Anniversary Edition / by: (Language materials, printed)

TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings by: (Language materials, printed)

Future Space-Transport-System Components under High Thermal and Mechanical Loads = Results from the DFG Collaborative Research Center TRR40 / by: (Language materials, printed)

Post-industrial Robotics = Exploring Informed Architecture / by: (Language materials, printed)

Vegetable Fiber Composites and their Technological Applications by: (Language materials, printed)

Structure and Properties of High-Entropy Alloys by: (Language materials, printed)

Limestone Mining in India by: (Language materials, printed)

Transport Processes and Separation Technologies by: (Language materials, printed)

Structural and Thermal Analyses of Deepwater Pipes by: (Language materials, printed)

Schienenfehler 1 = Beanspruchung und Schädigung von Eisenbahnschienen / by: (Language materials, printed)

Amorphous Chalcogenide Semiconductors and Related Materials by: (Language materials, printed)

Proceedings of the 3rd RILEM Spring Convention and Conference (RSCC 2020) = Volume 2: New Materials and Structures for Ultra-durability / by: (Language materials, printed)

ICSDEMS 2019 = Proceedings of the International Conference on Sustainable Design, Engineering, Management and Sciences / by: (Language materials, printed)

Advances in Material Science and Engineering = Selected articles from ICMMPE 2020 / by: (Language materials, printed)

Tribology of Polymer and Polymer Composites for Industry 4.0 by: (Language materials, printed)

Bacterial Cellulose = Sustainable Material for Textiles / by: (Language materials, printed)

Wood Additive Technologies = Application of Active Design Optioneering / by: (Language materials, printed)

Proceedings of the 3rd RILEM Spring Convention and Conference (RSCC 2020) = Volume 4: Shift to a Circular Economy / by: (Language materials, printed)

Sustainable Design in Textiles and Fashion by: (Language materials, printed)

Advances in Mechanical Engineering, Materials and Mechanics = Selected contributions from the 7th International Conference on Advances in Mechanical Engineering and Mechanics, ICAMEM 2019, December 16-18, 2019, Hammamet, Tunisia / by: (Language materials, printed)

3rd International Conference on Innovative Technologies for Clean and Sustainable Development = ITCSD 2020 / by: (Language materials, printed)

Enhanced Material, Parts Optimization and Process Intensification = Proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / by: (Language materials, printed)

Practical Approach to 3D Weaving by: (Language materials, printed)

Design and Crosstalk Analysis in Carbon Nanotube Interconnects by: (Language materials, printed)

Advances in Hydrogen Embrittlement Study by: (Language materials, printed)

Ancient Glass of South Asia = Archaeology, Ethnography and Global Connections / by: (Language materials, printed)

Processing and Characterization of Materials = Select Proceedings of CPCM 2020 / by: (Language materials, printed)

Acting Principles of Nano-Scaled Matrix Additives for Composite Structures by: (Language materials, printed)

Introduction to Geometrically Nonlinear Continuum Dislocation Theory = FE Implementation and Application on Subgrain Formation in Cubic Single Crystals Under Large Strains / by: (Language materials, printed)

Energy-Sustainable Advanced Materials by: (Language materials, printed)

Case Studies in Building Rehabilitation by: (Language materials, printed)

Fibre Reinforced Concrete: Improvements and Innovations = RILEM-fib International Symposium on FRC (BEFIB) in 2020 / by: (Language materials, printed)

Data Technology in Materials Modelling by: (Language materials, printed)

Concrete-Filled Double Skin Steel Tubular Column with Hybrid Fibre Reinforced Polymer = Post Fire Repair / by: (Language materials, printed)

Novel Materials for Dye-containing Wastewater Treatment by: (Language materials, printed)

Advances in Mechanical Engineering = Selected Contributions from the Conference “Modern Engineering: Science and Education”, Saint Petersburg, Russia, June 2020 / by: (Language materials, printed)

Advanced Removal Techniques for Dye-containing Wastewaters by: (Language materials, printed)

Operations and Basic Processes in Steelmaking by: (Language materials, printed)

Proceedings of the 8th International Ergonomics Conference = ERGONOMICS 2020 / by: (Language materials, printed)

Flax-TRM Composite Systems for Strengthening of Masonry = From Material Identification to Structural Behavior / by: (Language materials, printed)

Advances in Textile Waste Water Treatments by: (Language materials, printed)

Wearable Antennas and Body Centric Communication = Present and Future / by: (Language materials, printed)

Recent Advances in Computational Mechanics and Simulations = Volume-I: Materials to Structures / by: (Language materials, printed)

Fracture, Fatigue, Failure and Damage Evolution , Volume 3 = Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Dynamic Substructures, Volume 4 = Proceedings of the 38th IMAC, A Conference and Exposition on Structural Dynamics 2020 / by: (Language materials, printed)

Case Studies in Building Constructions by: (Language materials, printed)

Structural Analysis of Concrete-Filled Double Steel Tubes by: (Language materials, printed)

Diagnosis & Prognosis of AAR Affected Structures = State-of-the-Art Report of the RILEM Technical Committee 259-ISR / by: (Language materials, printed)

Recent Advances in Structural Engineering = Select Proceedings of NCRASE 2020 / by: (Language materials, printed)

Initiation and Flame Propagation in Combustion of Gases and Pyrophoric Metal Nanostructures by: (Language materials, printed)

3D Printing Architecture = Workflows, Applications, and Trends / by: (Language materials, printed)

Practical Design of Ships and Other Floating Structures = Proceedings of the 14th International Symposium, PRADS 2019, September 22-26, 2019, Yokohama, Japan- Volume II / by: (Language materials, printed)

Practical Design of Ships and Other Floating Structures = Proceedings of the 14th International Symposium, PRADS 2019, September 22-26, 2019, Yokohama, Japan- Volume III / by: (Language materials, printed)

Practical Design of Ships and Other Floating Structures = Proceedings of the 14th International Symposium, PRADS 2019, September 22-26, 2019, Yokohama, Japan- Volume I / by: (Language materials, printed)

Principles of Cement and Concrete Composites by: (Language materials, printed)

Challenges in Mechanics of Time Dependent Materials, Volume 2 = Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Proceedings of 1st International Conference on Structural Damage Modelling and Assessment = SDMA 2020, 4-5 August 2020, Ghent University, Belgium / by: (Language materials, printed)

Sustainable Fashion and Textiles in Latin America by: (Language materials, printed)

Materials Research and Applications = Select Papers from JCH8-2019 / by: (Language materials, printed)

Nonlinear Analysis of Thin-Walled Smart Structures by: (Language materials, printed)

Machining and Machinability of Fiber Reinforced Polymer Composites by: (Language materials, printed)

Proceedings of the 3rd RILEM Spring Convention and Conference (RSCC2020) = Volume 1: Strategies for a Resilient Built Environment / by: (Language materials, printed)

Innovations and Technologies in Construction = Selected Papers of BUILDINTECH BIT 2020 / by: (Language materials, printed)

Smart Technologies for Sustainable Development = Select Proceedings of SMTS 2019 / by: (Language materials, printed)

EASEC16 = Proceedings of The 16th East Asian-Pacific Conference on Structural Engineering and Construction, 2019 / by: (Language materials, printed)

Carbide in Special Steel = Formation Mechanism and Control Technology / by: (Language materials, printed)

Mechanics of Composite, Hybrid and Multifunctional Materials , Volume 6 = Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Degradation Theory of Long Term Operated Materials and Structures by: (Language materials, printed)

Model Fire in a Two-Storey Timber Building by: (Language materials, printed)

Proceedings of the 8th International Conference on Fracture, Fatigue and Wear = FFW 2020, August 26–27 2020 / by: (Language materials, printed)

Formgedächtnistechnik = Entwickeln, Testen und Anwenden / by: (Language materials, printed)

Recent Trends in Traditional and Technical Textiles = Select Proceedings of ICETT 2019 / by: (Language materials, printed)

Advances in Construction Materials and Structures = Select Proceedings of ICON 2019 / by: (Language materials, printed)

Design and Manufacture of Fibre-Reinforced Composites by: (Language materials, printed)

Eco-Friendly Adhesives for Wood and Natural Fiber Composites = Characterization, Fabrication and Applications / by: (Language materials, printed)

Surface Processing of Light Alloys Subject to Concentrated Energy Flows by: (Language materials, printed)

Recommender Systems in Fashion and Retail by: (Language materials, printed)

Analytical or Semi-analytical Solutions of Functionally Graded Material Structures by: (Language materials, printed)

Handbook of Nanocomposite Supercapacitor Materials III = Selection / by: (Language materials, printed)

Circular Economy = Assessment and Case Studies / by: (Language materials, printed)

Advanced Manufacturing Processes II = Selected Papers from the 2nd Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2020), September 8-11, 2020, Odessa, Ukraine / by: (Language materials, printed)

Special Topics in Structural Dynamics & Experimental Techniques, Volume 5 = Proceedings of the 38th IMAC, A Conference and Exposition on Structural Dynamics 2020 / by: (Language materials, printed)

Foundations of Classical Laminate Theory by: (Language materials, printed)

Nanotechnology in Edible Food Packaging = Food Preservation Practices for a Sustainable Future / by: (Language materials, printed)

Research and Development of Deck Bridges by: (Language materials, printed)

Chemie der Werkstoffe by: (Language materials, printed)

Comprehensive Utilization of Magnesium Slag by Pidgeon Process by: (Language materials, printed)

Advances in Civil Engineering Materials = Selected Articles from the International Conference on Architecture and Civil Engineering (ICACE2020) / by: (Language materials, printed)

Friction Stir Welding and Processing XI by: (Language materials, printed)

Rare Metal Technology 2021 by: (Language materials, printed)

Metal-Matrix Composites = Advances in Analysis, Measurement, and Observations / by: (Language materials, printed)

Reinforcement of Timber Elements in Existing Structures = State-of-the-Art Report of the RILEM TC 245-RTE / by: (Language materials, printed)

Ni-Co 2021: The 5th International Symposium on Nickel and Cobalt by: (Language materials, printed)

Magnesium Technology 2021 by: (Language materials, printed)

Manufacturing Automotive Components from Sustainable Natural Fiber Composites by: (Language materials, printed)

Plates = Theories and Applications / by: (Language materials, printed)

Nanomaterials and Nanocomposites for Environmental Remediation by: (Language materials, printed)

Physics and Mechanics of New Materials and Their Applications = Proceedings of the International Conference PHENMA 2020 / by: (Language materials, printed)

Schienenfehler 2 = Bruchmechanik rissartiger Schienenfehler / by: (Language materials, printed)

International RILEM Conference on Early-Age and Long-Term Cracking in RC Structures = CRC 2021 / by: (Language materials, printed)

Sandwich Structures: Theory and Responses by: (Language materials, printed)

Magnesium 2021 = Proceedings of the 12th International Conference on Magnesium Alloys and Their Applications / by: (Language materials, printed)

Recent Developments in Plastic Recycling by: (Language materials, printed)

Fundamentals of Dimensional Analysis = Theory and Applications in Metallurgy / by: (Language materials, printed)

Advances in Acoustics and Vibration III = Proceedings of the Third International Conference on Acoustics and Vibration (ICAV2021), March 15-16, 2021 / by: (Language materials, printed)

Proceedings of MEACM 2020 = Mechanical Engineering and Applied Composite Materials / by: (Language materials, printed)

Emerging Trends of Advanced Composite Materials in Structural Applications by: (Language materials, printed)

Adhesive Bonding of Aircraft Composite Structures = Non-destructive Testing and Quality Assurance Concepts / by: (Language materials, printed)

Cotton and Flax Fibre-Reinforced Geopolymer Composites = Synthesis, Properties and Applications / by: (Language materials, printed)

Prozessgerechte Topologieoptimierung für die Additive Fertigung by: (Language materials, printed)

Thermoplastische, rollgeformte Profile in Hybridbauweise 2 - TroPHy2 = Forschungsberichte aus dem Forschungscampus Open Hybrid LabFactory / by: (Language materials, printed)

Damage and Fracture of Ceramic-Matrix Composites Under Stochastic Loading by: (Language materials, printed)

Nanocomposites as Next-Generation Optical Materials = Fundamentals, Design and Advanced Applications / by: (Language materials, printed)

Handbook of Fullerene Science and Technology by: (Language materials, printed)

Gradient Microstructure in Laser Shock Peened Materials = Fundamentals and Applications / by: (Language materials, printed)

Next Generation Materials and Processing Technologies = Select Proceedings of RDMPMC 2020 / by: (Language materials, printed)

Proceedings of the Sustainable Concrete Materials and Structures in Construction 2020 = Towards Sustainable Green Concrete / by: (Language materials, printed)

Diagnostic of Concrete Samples Affected by Internal Swelling Reactions by: (Language materials, printed)

Round-Robin Test on Creep Behaviour in Cracked Sections of FRC: Experimental Program, Results and Database Analysis = State-of-the-Art Report of the RILEM TC 261-CCF / by: (Language materials, printed)

Civil Structural Health Monitoring = Proceedings of CSHM-8 Workshop / by: (Language materials, printed)

Handloom Sustainability and Culture = Artisanship and Value Addition / by: (Language materials, printed)

Flexible Forming for Fluid Architecture by: (Language materials, printed)

International Handbook of Structural Fire Engineering by: (Language materials, printed)

Fluid Mechanics Fundamentals of Hydrocyclones and Its Applications in the Mining Industry by: (Language materials, printed)

Chemically Deposited Nanocrystalline Metal Oxide Thin Films = Synthesis, Characterizations, and Applications / by: (Language materials, printed)

Advances in Mechanical Engineering = Select Proceedings of CAMSE 2020 / by: (Language materials, printed)

Structural Characterization and Seismic Retrofitting of Adobe Constructions = Experimental and Numerical Developments / by: (Language materials, printed)

Structural Materials = Behavior, Testing and Evaluation / by: (Language materials, printed)

Ten Materials That Shaped Our World by: (Language materials, printed)

Ceramics, Glass and Glass-Ceramics = From Early Manufacturing Steps Towards Modern Frontiers / by: (Language materials, printed)

Handloom Sustainability and Culture = Product Development, Design and Environmental Aspects / by: (Language materials, printed)

Properties of Self-Compacting Concrete with Coal Bottom Ash Under Aggressive Environments by: (Language materials, printed)

Glasfasern by: (Language materials, printed)

Functionalized Two-Dimensional Black Phosphorus and Polymer Nanocomposites as Flame Retardant = Preparation and Properties / by: (Language materials, printed)

Fundamentals of Materials Science = The Microstructure–Property Relationship Using Metals as Model Systems / by: (Language materials, printed)

Acoustic Emission = Fracture Detection in Structural Materials / by: (Language materials, printed)

Nickel-saving Type High Nitrogen Austenitic Stainless Steel by: (Language materials, printed)

Advanced Multicomponent Alloys = From Fundamentals to Applications / by: (Language materials, printed)

Handbook of Fullerene Science and Technology by: (Language materials, printed)

Plant Fiber Reinforced Composites by: (Language materials, printed)

Proceedings of the 3rd RILEM Spring Convention and Conference (RSCC 2020) = Volume 3: Service Life Extension of Existing Structures / by: (Language materials, printed)

Rubies and Implants = Aluminium oxide and Its Diverse Facets / by: (Language materials, printed)

Advances in Solid and Fracture Mechanics = A Liber Amicorum to Celebrate the Birthday of Nikita Morozov / by: (Language materials, printed)

Fibre Reinforced Concrete: Improvements and Innovations II = X RILEM-fib International Symposium on Fibre Reinforced Concrete (BEFIB) 2021 / by: (Language materials, printed)

Technological Advancements in Construction = Selected Papers / by: (Language materials, printed)

Glasses and Glass-Ceramics = Advanced Processing and Applications / by: (Language materials, printed)

Lectures Notes on Advanced Structured Materials by: (Language materials, printed)

Masonry: Building Pathologies and Design by: (Language materials, printed)

50+ Years of AIMETA = A Journey Through Theoretical and Applied Mechanics in Italy / by: (Language materials, printed)

Reinforced Concrete with Worked Examples by: (Language materials, printed)

Advances in Structural Mechanics and Applications = Proceedings of ASMA-2021 (Volume 3) / by: (Language materials, printed)

Advances in Structural Mechanics and Applications = Proceedings of ASMA-2021 / by: (Language materials, printed)

XXX Russian-Polish-Slovak Seminar Theoretical Foundation of Civil Engineering (RSP 2021) = Selected Papers / by: (Language materials, printed)

Third RILEM International Conference on Concrete and Digital Fabrication = Digital Concrete 2022 / by: (Language materials, printed)

Alloy 625 = Microstructure, Properties and Performance / by: (Language materials, printed)

Advances in Civil Engineering Materials = Selected Articles from the International Conference on Architecture and Civil Engineering (ICACE2021) / by: (Language materials, printed)

Materials Ageing in Light-Water Reactors = Handbook of Destructive Assays / by: (Language materials, printed)

Sustainable Architecture and Building Environment = Proceedings of ICSDEMS 2020 / by: (Language materials, printed)

Future Landscape of Structural Materials in India by: (Language materials, printed)

Handbook of Epoxy/Fiber Composites by: (Language materials, printed)

Betriebsfestigkeit = Bauteile sicher auslegen! / by: (Language materials, printed)

Werkstoffkunde = Strukturen - grundlegende Eigenschaften / by: (Language materials, printed)

WCFS2020 = Proceedings of the Second World Conference on Floating Solutions, Rotterdam / by: (Language materials, printed)

Proceedings of Fourth International Conference on Inventive Material Science Applications = ICIMA 2021 / by: (Language materials, printed)

Sustainable Light Concrete Structures by: (Language materials, printed)

Advances in Structural Integrity = Structural Integrity Over Multiple Length Scales / by: (Language materials, printed)

Proceedings of the 9th International Conference on Fracture, Fatigue and Wear = FFW 2021, August 2–3, Ghent University, Belgium / by: (Language materials, printed)

CIGOS 2021, Emerging Technologies and Applications for Green Infrastructure = Proceedings of the 6th International Conference on Geotechnics, Civil Engineering and Structures / by: (Language materials, printed)

Building Rehabilitation and Sustainable Construction by: (Language materials, printed)

Fundamentals of Metal Joining = Processes, Mechanism and Performance / by: (Language materials, printed)

Local and Nonlocal Micromechanics of Heterogeneous Materials by: (Language materials, printed)

Advanced Manufacturing Processes III = Selected Papers from the 3rd Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2021), September 7-10, 2021, Odessa, Ukraine / by: (Language materials, printed)

Advanced Materials = An Introduction to Modern Materials Science / by: (Language materials, printed)

Advances in Mechanical Engineering = Selected Contributions from the Conference “Modern Engineering: Science and Education”, Saint Petersburg, Russia, June 2021 / by: (Language materials, printed)

Innovation in Construction = A Practical Guide to Transforming the Construction Industry / by: (Language materials, printed)

Testing and Characterisation of Earth-based Building Materials and Elements = State-of-the-Art Report of the RILEM TC 274-TCE / by: (Language materials, printed)

Positive Energy Buildings = Concepts, Challenges and Opportunities / by: (Language materials, printed)

10th International Conference on FRP Composites in Civil Engineering = Proceedings of CICE 2020/2021 / by: (Language materials, printed)

Advances in Polymeric Eco-Composites and Eco-Nanocomposites = Synthesis, Properties, and Applications / by: (Language materials, printed)

Advancement in Materials, Manufacturing and Energy Engineering, Vol. I = Select Proceedings of ICAMME 2021 / by: (Language materials, printed)

Protection of Historical Constructions = Proceedings of PROHITECH 2021 / by: (Language materials, printed)

Proceedings of the 2nd International Conference on Structural Damage Modelling and Assessment = SDMA 2021, 4–5 August, Ghent University, Belgium / by: (Language materials, printed)

Green Infrastructure = Materials and Applications / by: (Language materials, printed)

Self-Healing Construction Materials = Fundamentals, Monitoring and Large Scale Applications / by: (Language materials, printed)

Dynamic Behavior of Materials, Volume 1 = Proceedings of the 2021 Annual Conference and Exposition on Experimental and Applied Mechanics / by: (Language materials, printed)

Nondestructive Testing and Evaluation of Fiber-Reinforced Composite Structures by: (Language materials, printed)

Polymer-Based Advanced Functional Materials for Energy and Environmental Applications by: (Language materials, printed)

Design of Reinforced Concrete Sections Under Bending and Axial Forces = Tables and Charts According to EUROCODE 2 / by: (Language materials, printed)

Engineered Cementitious Composites for Electrified Roadway in Megacities = A Comprehensive Study on Functional Performance / by: (Language materials, printed)

Advancement in Materials Processing Technology = Select Proceedings of AMPT 2020 / by: (Language materials, printed)

Micromechanics of Fiber-Reinforced Laminae by: (Language materials, printed)

Digital Fabrication with Cement-Based Materials = State-of-the-Art Report of the RILEM TC 276-DFC / by: (Language materials, printed)

Structural Integrity Cases in Mechanical and Civil Engineering by: (Language materials, printed)

The Plaston Concept = Plastic Deformation in Structural Materials / by: (Language materials, printed)

Conversion Coatings for Magnesium and its Alloys by: (Language materials, printed)

Proceedings of the 7th International Conference on Architecture, Materials and Construction = ICAMC 2021 / by: (Language materials, printed)

Electron Microscopy in Science and Engineering by: (Language materials, printed)

Impact Behavior of Fibre Reinforced Laminates = Fundamentals of Low Velocity Impact and Related Literature on FRP / by: (Language materials, printed)

Advanced Composites in Aerospace Engineering Applications by: (Language materials, printed)

Fatigue and Fracture of Materials and Structures = Contributions from ICMFM XX and KKMP2021 / by: (Language materials, printed)

Handbook of Damage Mechanics = Nano to Macro Scale for Materials and Structures / by: (Language materials, printed)

Fibers = history, production, properties, market / by: (Language materials, printed)

Stability and bifurcation of structures = statical and dynamical systems / by: (Language materials, printed)

Valorisation of waste and secondary materials for roads = state-of-the-art report of the RILEM TC 279-WMR / by: (Language materials, printed)

Clay composites = environmental applications / by: (Language materials, printed)

Seismic vulnerability index assessment framework of RC structures by: (Language materials, printed)

Structural analysis of plane frames = solved examples with force and displacement methods / by: (Language materials, printed)

Experimental vibration analysis for civil engineering structures = EVACES 2023.. Volume 2 / by: (Language materials, printed)

Proceedings of the Indian Structural Steel Conference 2020. = ISSC 2020 /. (Vol. 2) by: (Language materials, printed)

Strand corrosion in prestressed concrete structures by: (Language materials, printed)

Positron profilometry = probing material depths for enhanced understanding / by: (Language materials, printed)

Springer handbook of aerogels by: (Language materials, printed)

Materials and technologies for future advancement by: (Language materials, printed)

Proceedings of the 62nd Conference of Metallurgists, COM 2023 by: (Language materials, printed)

Structural design and controllable preparation of the function-directed crystalline materials by: (Language materials, printed)

Green infrastructure = materials and sustainable management / by: (Language materials, printed)

Molecular simulation investigations of property degradation in CFRP composite by: (Language materials, printed)

Advances in civil engineering materials = selected articles from the 7th International Conference on Architecture and Civil Engineering (ICACE 2023), Putrajaya, Malaysia / by: (Language materials, printed)

Proceedings of the 5th International Conference on Geotechnics for Sustainable Infrastructure Development = GEOTEC2023; 14-15 Dec; Hanoi, Vietnam / by: (Language materials, printed)

Mechanical integrity and risk-based inspection of process equipment, piping and pipelines by: (Language materials, printed)

The engineer's guide to materials = an applications-focused introduction to materials science / by: (Language materials, printed)

Superalloys 2024 = proceedings of the 15th International Symposium on Superalloys / by: (Language materials, printed)

Fourth RILEM International Conference on Concrete and Digital Fabrication = Digital Concrete 2024 / by: (Language materials, printed)

Proceedings of the 26th Australasian Conference on the Mechanics of Structures and Materials = ACMSM26, 3-6 December 2023, Auckland, New Zealand / by: (Language materials, printed)

Proceedings of the 2nd International Conference on Advances in Civil Infrastructure and Construction Materials (CICM 2023).. Volume 2 by: (Language materials, printed)

Proceedings of the 2nd International Conference on Advances in Civil Infrastructure and Construction Materials (CICM 2023).. Volume 1 by: (Language materials, printed)

Fracture behavior of nanocomposites and reinforced laminate structures by: (Language materials, printed)

Processing and fabrication of advanced materials. = proceedings of the 29th International Conference on Processing and Fabrication of Advanced Materials (29th PFAM) September 6-8, 2023 /. Volume 3 by: (Language materials, printed)

Nonlinear structures & systems. = proceedings of the 42nd IMAC, a conference and exposition on structural dynamics 2024 /. Vol. 1 by: (Language materials, printed)

Recent developments in structural engineering. = select proceedings of 13th Structural Engineering Convention (SEC) /. Volume 4 by: (Language materials, printed)

4th fib International Conference on Concrete Sustainability (ICCS2024).. Volume 2 by: (Language materials, printed)

Refractory fundamentals in metallurgical practice by: (Language materials, printed)

Embodied and operational carbon in buildings = strategies to decarbonize / by: (Language materials, printed)

Shape memory alloys in civil engineering by: (Language materials, printed)

Processing and fabrication of advanced materials. = proceedings of the 29th International Conference on Processing and Fabrication of Advanced Materials (29th PFAM) September 6-8, 2023 /. Volume 1 by: (Language materials, printed)

Transforming construction: advances in fiber reinforced concrete = XI RILEM-fib International Symposium on Fiber Reinforced Concrete (BEFIB 2024) / by: (Language materials, printed)

Dynamic environments testing. = proceedings of the 42nd IMAC, a Conference and Exposition on Structural Dynamics 2024 /. Vol. 7 by: (Language materials, printed)

Proceedings of the 12th International Conference on Advanced Materials and Engineering Materials = ICAMEM 2023, 15-18 December, Bangkok, Thailand / by: (Language materials, printed)